- Posts: 61
- Thank you received: 3
Sticky fluid
- Andyp62
- Topic Author
- Offline
- User
10 Mar 2024 07:29 - 10 Mar 2024 09:50 #896248
by Andyp62
1978 Z650 B2, US import to the UK
Sticky fluid was created by Andyp62
Hi
I have been using my KZ for the past month without any problems but recently the throttle is not returning properly and tick over is very erratic, on taking them apart I found the bores are contaminated with a thick substance almost like tar, I have only ever used E5 petrol (in the U.K.) so was wondering if anyone else has come across this before?.
It is a 1978 KZ650 B2 import from the USA.
thanks
I have been using my KZ for the past month without any problems but recently the throttle is not returning properly and tick over is very erratic, on taking them apart I found the bores are contaminated with a thick substance almost like tar, I have only ever used E5 petrol (in the U.K.) so was wondering if anyone else has come across this before?.
It is a 1978 KZ650 B2 import from the USA.
thanks
1978 Z650 B2, US import to the UK
Last edit: 10 Mar 2024 09:50 by Street Fighter LTD. Reason: More attachments
Please Log in or Create an account to join the conversation.
- Warren3200gt
-
- Offline
- User
10 Mar 2024 07:52 #896249
by Warren3200gt
Z1000J2 somewhat modified!
Replied by Warren3200gt on topic Sticky fluid
Well it is the colour that ethanol fuel goes when as it evaporates but to leave that amount of shite it would need to have been E55 not E5.
It can only be fuel related, either the fuel itself or maybe shite from the tank. Are you using an ethanol treatment?
Is the tank lined? Maybe breaking down.?
Was it sprayed internally with fogging oil or some other substance whilst laid up?
Just ideas as never come across anything that bad.
It can only be fuel related, either the fuel itself or maybe shite from the tank. Are you using an ethanol treatment?
Is the tank lined? Maybe breaking down.?
Was it sprayed internally with fogging oil or some other substance whilst laid up?
Just ideas as never come across anything that bad.
Z1000J2 somewhat modified!
Please Log in or Create an account to join the conversation.
- gd4now
-
- Offline
- User
- Denco where did you go?
- zed1015
-
- Away
- User
- SWest
-
- Offline
- Sustaining Member
- 10 22 2014
10 Mar 2024 10:03 #896254
by SWest
Replied by SWest on topic Sticky fluid
Looks like a very poor cleaning job. It's a wonder it ran at all.
Steve
Steve
Please Log in or Create an account to join the conversation.
- Nessism
-
- Offline
- Sustaining Member
10 Mar 2024 16:00 #896261
by Nessism
BTW, regular, non ethanol gasoline, gets grungy just the same.
Replied by Nessism on topic Sticky fluid
No kidding. Those are some seriously dirty carbs. They need a full teardown, and soaking in carb dip. Spraying them down while ganged together is a fool's errand. Plus, all new O-rings...and get rid of the multiple bowl gaskets.Looks like a very poor cleaning job. It's a wonder it ran at all.
Steve
BTW, regular, non ethanol gasoline, gets grungy just the same.
Please Log in or Create an account to join the conversation.
- Warren3200gt
-
- Offline
- User
11 Mar 2024 01:30 #896274
by Warren3200gt
Z1000J2 somewhat modified!
Replied by Warren3200gt on topic Sticky fluid
The marine version stays active for twice the time period. I have bikes that don't get used some years but they fire right up without issue when I do use them.
Z1000J2 somewhat modified!
Please Log in or Create an account to join the conversation.
- Nessism
-
- Offline
- Sustaining Member
- Wookie58
-
- Offline
- Moderator
11 Mar 2024 06:45 #896282
by Wookie58
Replied by Wookie58 on topic Sticky fluid
I think looking at the length of the float bowl screws there is a PO or two that have been "less than sympathetic"The cross-point screws holding the carbs to the joining plate are completely butchered. How did you get them out?
And for what it's worth, a Vessel #3 Impacta is my go-to tool to remove those screws.
Please Log in or Create an account to join the conversation.
If you like KZR Please consider making a donation. Thank you.
KZRider is free, but not without cost.
Please consider chipping in a few bucks to help cover the cost of running the KZR servers.