handling 82 gpz750 vs 81 gpz 1100

More
18 Apr 2015 19:41 - 18 Apr 2015 19:48 #668605 by baldy110
Replied by baldy110 on topic handling 82 gpz750 vs 81 gpz 1100
I did post it up on KZ1000R.com, they gave me bike of the month in 2012. The link is attached. I did remove items and I was really careful on what I put on it. The ZRX swingarm is a lot lighter than the stock one. The Kerker is way lighter than the stock exhaust. I did remove about 1 pound off the back of the frame when I cut and moved the tail light assembly further back to be flush with the rear fender instead of sticking out. I ditched the stock foot peg brackets and foot pegs and went with aftermarket rearsets and brackets that came off a crashed Yamaha FZR1000 that saved about 10 pounds. I ditched the stock instruments and went with a Koso RX1 gauge. I used a ballistac battery which saved me 6 pounds, all this adds up. I wanted the engine to sit as low as possible so I could remove the top end without removing the entire engine from the frame. The 1100 engine is quite a bit taller and wider than the 750. I have about 1/8" gap between the engine and frame on both sides.
www.kz1000r.com/index.php/botm-2012-141?id=166
Last edit: 18 Apr 2015 19:48 by baldy110.

Please Log in or Create an account to join the conversation.

  • Randombeat
  • Offline
  • User
  • 0 to 100 real quick...
More
18 Apr 2015 20:43 #668616 by Randombeat
Replied by Randombeat on topic handling 82 gpz750 vs 81 gpz 1100

baldy110 wrote: The 750 is a much better handling machine, lighter and better for around town and twisty roads. But I LOVE the power of the 1100 engine. My solution was to install a GPZ1100 engine into the GPZ750 frame. Now I got the best of both worlds.

l

Baldy, how did you do those wheels? I'm loving the gold w polished lip....

1980 KZ750H LTD-- pods-- vance & hines 4-1 --speedo/tach/blinker/switch deletes -- brat style

Please Log in or Create an account to join the conversation.

More
19 Apr 2015 16:11 #668755 by baldy110
Replied by baldy110 on topic handling 82 gpz750 vs 81 gpz 1100
I sandblasted the wheels taped off what I did not want painted then sprayed them with POR 15 oldsmobile gold engine paint. That stuff is tuff, I painted the swingarm with their aluminum engine paint and about 6 weeks later the rear brake master cylinder started leaking and soaked the swingarm with brake fluid for about 12 hours before I discovered it. I thought the paint was going to just peel off but when I cleaned it up nothing came off the paint was still good as new.

Please Log in or Create an account to join the conversation.

More
10 Aug 2024 06:55 #903024 by supermotobobby
Replied by supermotobobby on topic handling 82 gpz750 vs 81 gpz 1100
This message contains secure information

Please Log in or Create an account to join the conversation.

More
10 Aug 2024 07:08 #903029 by Wookie58
Replied by Wookie58 on topic handling 82 gpz750 vs 81 gpz 1100
The thread you are replying to is 9 years old, however if you look at the 2023 BOTY thread the winning bike is a GPZ1100 in a 650 so Bevelhead would be able to guide you (if you don't find all you need in his build thread) Injected also has a current build thread running (sleeper 1100) carrying out a similar transplant but with an earlier motor
The following user(s) said Thank You: supermotobobby

Please Log in or Create an account to join the conversation.

Powered by Kunena Forum