Zukiworks build's a ZRX

  • Street Fighter LTD
  • Street Fighter LTD's Avatar
  • Offline
  • Moderator
  • TURBO, Its Better to be Blown than Injected
  • Posts: 4941
  • Thanks: 2089

Re: Zukiworks build's a ZRX

14 Dec 2017 17:49
#776051
Please make sure you use acid in a well ventilated area.
Just looking out for your lungs.
Breathing is a very basic function
Dave B) B) B)

Original owner 78 1000 LTD
Mr Turbo Race Kit, MTC 1075 Turbo pistons by PitStop Performance , Falicon Ultra Lite Super Crank, APE everything. Les Holt @ PDM's Billet Goodies . Frame by Chuck Kurzawa @ Logghe Chassis . Deep sump 5qt oil pan. RIP Bill Hahn

Please Log in or Create an account to join the conversation.

  • zukdave
  • zukdave's Avatar Topic Author
  • Offline
  • User
  • Posts: 1685
  • Thanks: 229

Re: Zukiworks build's a ZRX

14 Dec 2017 18:40
#776052
Dave I'm thinking after spending the last 40 + years in a shop I've inhaled enough shit I'm a walking haz-mat. site.

I did do this outside by the way.
1980 KZ650 F1
ZX750A1 motor.
Wiseco 810cc kit.
Zukiworks racing ported head.
VM 29 smooth bore's.
Dyna 2000 Ign. w/Dyna mini coil's
APE cylinder stud's and nut's.
APE valve spring's.
APE Track King clutch.
V/H KZ1000 sidewinder.
3.5x18 laced to a KZ1000 disk hub.
150/60/18 Shinko 006 Podium.
63" wheel base.

Please Log in or Create an account to join the conversation.

  • zukdave
  • zukdave's Avatar Topic Author
  • Offline
  • User
  • Posts: 1685
  • Thanks: 229

Re: Zukiworks build's a ZRX

14 Dec 2017 18:53
#776053
I've got a spare set of heel gaurds so thought I'd play with them and the drill press.
Stock.

Drilled. After this pic I added another row of holes but didn't get a pic tonight.
1980 KZ650 F1
ZX750A1 motor.
Wiseco 810cc kit.
Zukiworks racing ported head.
VM 29 smooth bore's.
Dyna 2000 Ign. w/Dyna mini coil's
APE cylinder stud's and nut's.
APE valve spring's.
APE Track King clutch.
V/H KZ1000 sidewinder.
3.5x18 laced to a KZ1000 disk hub.
150/60/18 Shinko 006 Podium.
63" wheel base.

Please Log in or Create an account to join the conversation.

  • zukdave
  • zukdave's Avatar Topic Author
  • Offline
  • User
  • Posts: 1685
  • Thanks: 229

Re: Zukiworks build's a ZRX

15 Dec 2017 17:41
#776104
Heres the finished heel guards.

1980 KZ650 F1
ZX750A1 motor.
Wiseco 810cc kit.
Zukiworks racing ported head.
VM 29 smooth bore's.
Dyna 2000 Ign. w/Dyna mini coil's
APE cylinder stud's and nut's.
APE valve spring's.
APE Track King clutch.
V/H KZ1000 sidewinder.
3.5x18 laced to a KZ1000 disk hub.
150/60/18 Shinko 006 Podium.
63" wheel base.

Please Log in or Create an account to join the conversation.

  • SWest
  • SWest's Avatar
  • Offline
  • Sustaining Member
  • 10 22 2014
  • Posts: 23257
  • Thanks: 2840

Re: Zukiworks build's a ZRX

15 Dec 2017 18:03
#776108
Nice work. How well does that exhaust work?
Steve

Please Log in or Create an account to join the conversation.

  • zukdave
  • zukdave's Avatar Topic Author
  • Offline
  • User
  • Posts: 1685
  • Thanks: 229

Re: Zukiworks build's a ZRX

17 Dec 2017 16:31
#776236
Steve the pipe works great and is not to loud. I sold my buddy Dan the spare Muzzy left side pipe I had with a diff.
mid pipe and can and his ZRX is a lot louder.
1980 KZ650 F1
ZX750A1 motor.
Wiseco 810cc kit.
Zukiworks racing ported head.
VM 29 smooth bore's.
Dyna 2000 Ign. w/Dyna mini coil's
APE cylinder stud's and nut's.
APE valve spring's.
APE Track King clutch.
V/H KZ1000 sidewinder.
3.5x18 laced to a KZ1000 disk hub.
150/60/18 Shinko 006 Podium.
63" wheel base.
The following user(s) said Thank You: SWest

Please Log in or Create an account to join the conversation.

  • zukdave
  • zukdave's Avatar Topic Author
  • Offline
  • User
  • Posts: 1685
  • Thanks: 229

Re: Zukiworks build's a ZRX

19 Dec 2017 19:38
#776383
I think I've posted about how the lower shock mounts on the swing arm are in to far and pull the
bottom of the shocks in so tonight got to looking at what I need to do to fix that.
Simple fix cut them off and make new mounts and have them welded on arm's cro-mo I don't have a Tig welder

Got to thinkin and came up with a way to use the mounts that are on it and make some adjustable mount's.
Cut a 2" thick piece off a 4x4x12 piece of alum I've got and fired up the getto mill.


1980 KZ650 F1
ZX750A1 motor.
Wiseco 810cc kit.
Zukiworks racing ported head.
VM 29 smooth bore's.
Dyna 2000 Ign. w/Dyna mini coil's
APE cylinder stud's and nut's.
APE valve spring's.
APE Track King clutch.
V/H KZ1000 sidewinder.
3.5x18 laced to a KZ1000 disk hub.
150/60/18 Shinko 006 Podium.
63" wheel base.

Please Log in or Create an account to join the conversation.

  • riturbo
  • riturbo's Avatar
  • Offline
  • Sustaining Member
  • Posts: 758
  • Thanks: 282

Re: Zukiworks build's a ZRX

23 Dec 2017 06:21
#776536
Nice job . Bikes coming along great
Gpz 750 turbo The one I ride
Gpz 750 turbo Not finished
Gpz 750 turbo Not started
Gpz 550 1981
Gpz 550 1983
Bunch of other junk

Please Log in or Create an account to join the conversation.

  • zukdave
  • zukdave's Avatar Topic Author
  • Offline
  • User
  • Posts: 1685
  • Thanks: 229

Re: Zukiworks build's a ZRX

23 Dec 2017 16:36
#776565
riturbo wrote: Nice job . Bikes coming along great

Thanks !! Got it out for a ride the other night and pulled the wick up real hard at the top of third and into fourth
it was trying to lift the fornt tire. Top of fifth this B^%%& was rolling.
1980 KZ650 F1
ZX750A1 motor.
Wiseco 810cc kit.
Zukiworks racing ported head.
VM 29 smooth bore's.
Dyna 2000 Ign. w/Dyna mini coil's
APE cylinder stud's and nut's.
APE valve spring's.
APE Track King clutch.
V/H KZ1000 sidewinder.
3.5x18 laced to a KZ1000 disk hub.
150/60/18 Shinko 006 Podium.
63" wheel base.

Please Log in or Create an account to join the conversation.

  • zukdave
  • zukdave's Avatar Topic Author
  • Offline
  • User
  • Posts: 1685
  • Thanks: 229

Re: Zukiworks build's a ZRX

26 Dec 2017 00:16
#776619
1980 KZ650 F1
ZX750A1 motor.
Wiseco 810cc kit.
Zukiworks racing ported head.
VM 29 smooth bore's.
Dyna 2000 Ign. w/Dyna mini coil's
APE cylinder stud's and nut's.
APE valve spring's.
APE Track King clutch.
V/H KZ1000 sidewinder.
3.5x18 laced to a KZ1000 disk hub.
150/60/18 Shinko 006 Podium.
63" wheel base.

Please Log in or Create an account to join the conversation.

  • zukdave
  • zukdave's Avatar Topic Author
  • Offline
  • User
  • Posts: 1685
  • Thanks: 229

Re: Zukiworks build's a ZRX

26 Dec 2017 18:14
#776635
I've had one of these Raptor two stage shift light;s I bought a few years ago and never used so think I'll finally use it and put it on this bike.
www.raptorperformance.com/collections/sh...i-shift-launch-light
1980 KZ650 F1
ZX750A1 motor.
Wiseco 810cc kit.
Zukiworks racing ported head.
VM 29 smooth bore's.
Dyna 2000 Ign. w/Dyna mini coil's
APE cylinder stud's and nut's.
APE valve spring's.
APE Track King clutch.
V/H KZ1000 sidewinder.
3.5x18 laced to a KZ1000 disk hub.
150/60/18 Shinko 006 Podium.
63" wheel base.

Please Log in or Create an account to join the conversation.

  • zukdave
  • zukdave's Avatar Topic Author
  • Offline
  • User
  • Posts: 1685
  • Thanks: 229

Re: Zukiworks build's a ZRX

10 Jan 2018 05:07 - 10 Jan 2018 05:09
#777142
Had this thing out last Sunday for a little ride to do some launch practice time to learn how to ride it.
Cold street so a good burn out to get some heat in the tire for the first hard launch bring the rpm's up to about 5000 rpm
slide the clutch out and pin the throttle and it's all I could do to fight the wheelie.
Second gear more wheelie's but could ride it out hit third gear it's still trying to lift the front tire and is flat hauling ass.
1980 KZ650 F1
ZX750A1 motor.
Wiseco 810cc kit.
Zukiworks racing ported head.
VM 29 smooth bore's.
Dyna 2000 Ign. w/Dyna mini coil's
APE cylinder stud's and nut's.
APE valve spring's.
APE Track King clutch.
V/H KZ1000 sidewinder.
3.5x18 laced to a KZ1000 disk hub.
150/60/18 Shinko 006 Podium.
63" wheel base.
Last edit: 10 Jan 2018 05:09 by zukdave.

Please Log in or Create an account to join the conversation.

Powered by Kunena Forum