Project Kawashoe ,,( Pics )

More
17 Mar 2006 21:54 #32121 by 77KZ650
Replied by 77KZ650 on topic Project Kawashoe ,,( Pics )
Shoe48 wrote:

Update .. I read on here somewhere that the swing arm pivot bolt could be used as the axle if bushings were made for the swing arm,, or atleast that is the way I took it .. it turns out that the pivot bolt is long enough and uses the same nut as the axle But the center is smaller in size than the axle .. so this means you have to change the wheel bearings then drill out all your spacers , Caliper bracket to the larger 20mm .. :angry: :unsure: :( :pinch: I found whell bearings at my local bike shop at around 10.00 each .. :)

I think baldy110 did this, or something like this, maybe pm him
Scott

07 MDP Rookie of the Year
01 ZX-12R street/drag bike. 8.97 @155.7 pump gas, dot tires, no bars, no power adders. top speed in the 1/4: 161MPH

Please Log in or Create an account to join the conversation.

Powered by Kunena Forum