question on my 530 chain conversion

More
23 Mar 2006 10:20 #33716 by mariozappa
Replied by mariozappa on topic question on my 530 chain conversion
I'll have to look when I get home today to see if there is any other markings on my old sprocket.

If the 38t sprocket I have now fits, and has 80 mm center hole. How would I be able to get the 40t on there with only a 74mm center hole?
1977 KZ650C1
and the KZ650/KZ750 Conversion ;)

Please Log in or Create an account to join the conversation.

More
23 Mar 2006 10:21 #33717 by mariozappa
Replied by mariozappa on topic question on my 530 chain conversion
Yeah, what Onkle said is right on the money.
1977 KZ650C1
and the KZ650/KZ750 Conversion ;)

Please Log in or Create an account to join the conversation.

More
23 Mar 2006 10:42 #33725 by Jeff.Saunders
Replied by Jeff.Saunders on topic question on my 530 chain conversion
Sorry - misunderstood - then it should be fine - just a difference in the finish of the sprocket
This email address is being protected from spambots. You need JavaScript enabled to view it.
www.z1enterprises.com

Z1 Ent on Facebook,

Please Log in or Create an account to join the conversation.

More
23 Mar 2006 11:06 #33740 by mariozappa
Replied by mariozappa on topic question on my 530 chain conversion
OK, thanks alot everybody.
Sometimes I just have to check myself once in awhile to make sure I'm still doing the right thing.
1977 KZ650C1
and the KZ650/KZ750 Conversion ;)

Please Log in or Create an account to join the conversation.

More
23 Mar 2006 11:07 #33741 by OnkelB
Replied by OnkelB on topic question on my 530 chain conversion
Good info anyway - I never knew the B and F1 sprockets were different from the rest of the 650s.
77 KZ 650 B1, 82 GPz 1100 B2.

Please Log in or Create an account to join the conversation.

More
23 Mar 2006 11:10 #33743 by mariozappa
Replied by mariozappa on topic question on my 530 chain conversion
Since I'm obviously not able to tell whether I had a 630 or 530 setup.
What woould be different about the 630 setup as opposed to what I have now?

Post edited by: mariozappa, at: 2006/03/23 14:10
1977 KZ650C1
and the KZ650/KZ750 Conversion ;)

Please Log in or Create an account to join the conversation.

More
23 Mar 2006 11:17 #33747 by OnkelB
Replied by OnkelB on topic question on my 530 chain conversion
Here´s a link to some background info on chains and sprockets:

www.gizmology.net/sprockets.htm

Basically a 530 chain is 5/8" from pin center to next pin center, a 630 is 6/8" (3/4"), both have 3/8" wide rollers.



.

Post edited by: onkelb, at: 2006/03/23 14:20
77 KZ 650 B1, 82 GPz 1100 B2.

Please Log in or Create an account to join the conversation.

Powered by Kunena Forum

Forum Links