- Posts: 16
- Thank you received: 0
suspension options for a KZ550
- suckerpunchjohnny
- Topic Author
- Offline
- User
1) Best way to put the ass down... can I use 10" sportster shocks? Or I've heard mini bike shocks? or do you guys prefer hard struts and a spring seat?
2) How to drop the front... it's an air shock fork... 90lb psi I believe? Can you drop them down, or do you need to just change the front forks...?
Any info would be great, just trying to bypass the whole trial and error type testing!
I'd love to see what others have done to their KZ 550s as well! POST EM UP!
Please Log in or Create an account to join the conversation.
- suckerpunchjohnny
- Topic Author
- Offline
- User
- Posts: 16
- Thank you received: 0
Please Log in or Create an account to join the conversation.
- Nebr_Rex
- Offline
- User
- Posts: 1904
- Thank you received: 300
Hey guys, I just bought my first KZ. 1981 KZ 550 A... thing is an awesome little bike and I'm psyched to work on it... I know my way around a shop real well, but don't really know the tricks to these old KZ's... I want to put this thing down as low as I reasonably can... so a couple questions...
1) Best way to put the ass down... can I use 10" sportster shocks? Or I've heard mini bike shocks? or do you guys prefer hard struts and a spring seat?
2) How to drop the front... it's an air shock fork... 90lb psi I believe? Can you drop them down, or do you need to just change the front forks...?
Any info would be great, just trying to bypass the whole trial and error type testing!
I'd love to see what others have done to their KZ 550s as well! POST EM UP!
What are you trying to do?
Are you vertically challenged?
90 psi?
:X hardley shocks?
Get a manual.
raise the forks
progressive make an 11.5 shock
2002 ZRX1200R
81 GPz1100
79 KZ1000st daily ride
79 KZ1000mk2 prodject
78 KZ650sr
78 KZ650b
81 KZ750e
80 KZ750ltd
77 KZ400/440 cafe project
76 KZ400/440 Fuel Injected
www.dotheton.com/forum/index.php?topic=39120.0
.
Please Log in or Create an account to join the conversation.
- JMKZHI
- Offline
- Platinum Member
- Posts: 2429
- Thank you received: 48
Sportster shocks can be used. You'll have to swap out the bushings. The bottom eye on them is too wide for the Kaw mount, so you'll either have to spread the mount open a tad or grind down the Sportys by ~4mm. Also, the coil spring on the shock may interfer very slightly with the chain guard, assuming you don't remove it.
Please Log in or Create an account to join the conversation.
- suckerpunchjohnny
- Topic Author
- Offline
- User
- Posts: 16
- Thank you received: 0
Got the shop manual, been slowly reading up on it, no idea about the 90psi statement, guy that had it previously gave me that number...
LOL sorry... didnt mean to say the H word... I just know you can get them to sit low and still have shocks instead of a hardtail...
Thanks for the info, I'll check those out...
Please Log in or Create an account to join the conversation.
- 650ed
- Offline
- User
- Posts: 15344
- Thank you received: 2829
1977 KZ650-C1 Original Owner - Stock (with additional invisible FIAMM horn)
Please Log in or Create an account to join the conversation.
- suckerpunchjohnny
- Topic Author
- Offline
- User
- Posts: 16
- Thank you received: 0
Please Log in or Create an account to join the conversation.
- loudhvx
- Offline
- KZr Legend
- Posts: 10868
- Thank you received: 1616
Why not trade for a KZ550C LTD. They are already setup with a smaller diameter, but fatter rear tire and cruiser style frame. That will have a way lower seat than the 550A will ever have without cutting the frame.
The 550C can be found much cheaper than 550A's usually, and people with 550C's often want to make them more like the 550A's, so it shouldn't be difficult to find someone who wants to trade their 550C. The engines and carbs are virtually identical (except the last year 550A). So you could just trade frames with someone if they want to keep their engine.
The airboxes are different shape and the gas tanks on the 550C are more teardrop shaped.
Also, you want more like 9 psi.
Download the manual I have in my signature.
1981 KZ550 D1 gpz.
Kz550 valve train warning.
Other links.
Please Log in or Create an account to join the conversation.
- hocbj23
- Visitor
Please Log in or Create an account to join the conversation.
- suckerpunchjohnny
- Topic Author
- Offline
- User
- Posts: 16
- Thank you received: 0
I got my bike for super cheap, so I'm gonna have fun with it... and it will by no means be my only or last KZ! I'm hooked already...
has anyone mounted a peanut tank of their 550 without mods? and what brands would you recommend for pod type air filters and jet changes? and for mini gauges that have the correct ratios....
THANKS! If I can figure out all the logistics this week, I can order it all up and try to get this thing built before the winter hits us up here in New England!
Please Log in or Create an account to join the conversation.
- suckerpunchjohnny
- Topic Author
- Offline
- User
- Posts: 16
- Thank you received: 0
Please Log in or Create an account to join the conversation.
- loudhvx
- Offline
- KZr Legend
- Posts: 10868
- Thank you received: 1616
... what is your recommendation for a bare bones wiring system? Build my own or order and ebay stock harness and scrap what I don't need?
Well, I only wire from scratch. Every old harness I've taken off of a bike had many spots that were weakened or even broken, but still making contact.
It really depends on how minimalistic you want to go, and how much wiring experience you have. There are so many little things that make all the difference. The wire needs to be supported and bundled wherever possible. There should be no dangling wires, and very minimal solder. A good crimp connection will outlast solder connections. No strands should be nicked or cut during stripping. Etc.etc. Get a good ratcheting crimper and a good automatic stripper. Those two will save hours and headaches.
If you only want starter/ignition/charging/headlight/tail light/brake light, then it's not real hard to do from scratch. Basically you keep the little subharnesses that go to the handlebar controls, light switches etc, and make up your own main harness.
I can draw up a schematic pretty quickly if you know what you want.
A new harness would be the easiest way, but that won't be cheap if you can even find one. Most used harnesses have problems in the same places, so they are usually not going to save much time or work than your old harness.
The 1980 A1 is slightly different from the 81/82 A2/A3, so you want to make sure the harness is from 81 or 82.
1981 KZ550 D1 gpz.
Kz550 valve train warning.
Other links.
Please Log in or Create an account to join the conversation.