front steering lock

More
16 May 2006 11:24 #47737 by 94yj
front steering lock was created by 94yj
how do i get the steering shaft lock to work all i can get it to do when i put the key in is about 1/4 turn counterclockwise tell me where i am messing up i would like it to lock as it did when it was new

1980 kz 650 ltd

thanks

Post edited by: 94yj, at: 2006/05/16 15:59

Please Log in or Create an account to join the conversation.

More
16 May 2006 12:39 #47756 by ABR
Replied by ABR on topic front steering lock
In same boat.

Please Log in or Create an account to join the conversation.

More
16 May 2006 14:13 #47781 by Z1R rider
Replied by Z1R rider on topic front steering lock
if it's the same as mine, turn CCW 1/4 turn, push in (with steering head at correct angle), turn CW 1/4, remove key. ;)

1978 KZ1000, Z1R
1999 250 Ninja race bike
2013 WR250F, fun in the dirt

Please Log in or Create an account to join the conversation.

More
16 May 2006 14:24 #47783 by ltdrider
Replied by ltdrider on topic front steering lock
Mine's never worked.
After about 10 minutes, I gave up trying. With my luck, I'd get it to lock, then guess what?

'76 KZ900 LTD (Blaze)
'96 Voyager XII (Dark Star)
'79 KZ650 Cafe Project (Dirty Kurt)
Greensboro, NC

Please Log in or Create an account to join the conversation.

More
16 May 2006 17:48 #47830 by 94yj
Replied by 94yj on topic front steering lock
which is the correct angle to get it to lock also is it possible to remove the key cylinder assy and clean it up

thanks

Please Log in or Create an account to join the conversation.

More
16 May 2006 18:41 #47852 by Sandy
Replied by Sandy on topic front steering lock
I know on My 77 1000,I can remove it.It's only held in place by a set-screw.I bought a new one from the dealer a few years back,and it was a simple install.
Not sure on the 650,but again...on My 77 1000,I have to have the front end turned all the way,either direction before the lock pin will pass by the steering stopper.

1977 KZ1000 A-1

Please Log in or Create an account to join the conversation.

More
16 May 2006 18:41 #47853 by btchalice
Replied by btchalice on topic front steering lock
usually full left

Terry Meyer / Wichita KS
76 kz900 w/1000 motor TWZTD
I am not driving too fast, I'm flying too low.

Please Log in or Create an account to join the conversation.

  • Biquetoast
  • Offline
  • User
  • King Jeremy The Wicked
More
16 May 2006 19:31 #47870 by Biquetoast
Replied by Biquetoast on topic front steering lock
Z1R rider wrote:

if it's the same as mine, turn CCW 1/4 turn, push in (with steering head at correct angle), turn CW 1/4, remove key. ;)


I second this.
It's a "feel" thing.
You have to have the stem turned in just the right spot, the push-in at just the right time, while you ease the key to turn....

(1.) '75/'76 KZ400D - Commuter
(2.) '78 KZ750B3 Twin - Commuter
(3.) '78 KZ750B3 Twin - Commuter
(4.) '75 KZ400D - Sold
kz750twins.com

Please Log in or Create an account to join the conversation.

More
16 May 2006 20:32 #47894 by OKC_Kent
Replied by OKC_Kent on topic front steering lock
Mine only works with forks full right. Turn the key a bit, push in, turn again.

Oklahoma City, OK
78 KZ650 B2 82,000+ miles

Please Log in or Create an account to join the conversation.

More
16 May 2006 21:58 #47926 by donthekawguy
Replied by donthekawguy on topic front steering lock
Is it the kind that locks on the bottom or on the side of the neck? If it's the neck the "lock" part fits into a slot on the stem. It might take some time to find the slot by moving the handlebars back and forth.

Rathdrum Idaho
1971 Kawasaki g3ss
1972 Yamaha R5 350
1965 Suzuki Hillbilly
1964 Yamaha 125

Please Log in or Create an account to join the conversation.

More
17 May 2006 04:48 #47946 by Nevco48
Replied by Nevco48 on topic front steering lock
What ever you do, if you lock it, don't forget to un-lock it before you take off!:unsure:

Please Log in or Create an account to join the conversation.

More
17 May 2006 13:28 #48040 by Leather
Replied by Leather on topic front steering lock
AMEN to the not forgetting part!! :ohmy:

Please Log in or Create an account to join the conversation.

Powered by Kunena Forum