- Posts: 554
- Thank you received: 6
Is this GSXR Swingarm/Wheel going to work?
- badrhino
- Topic Author
- Offline
- User
1980 KZ1000 with a 1982 KZ1000J motor with 1100 pistons and heads, Vance & Hines, 29MM Smooth Bores, Work in Progress
Franken Z!
Please Log in or Create an account to join the conversation.
- wireman
- Offline
- User
- The most interesting prick in the world
- Posts: 4761
- Thank you received: 299
Make sure you buy a new rear sprocket to go with the chain
posting from deep under a non-descript barn in an undisclosed location southwest of Omaha.
Please Log in or Create an account to join the conversation.
- Haybus
- Offline
- User
- Big Al
- Posts: 346
- Thank you received: 42
www.jtsprockets.com/catalogue/model/1733
1976 KZ900 LTD (sort of)
2005 FJR
2009 Hayabusa
www.kzrider.com/forum/11-projects/557845...-streetfighter-build
Please Log in or Create an account to join the conversation.
- badrhino
- Topic Author
- Offline
- User
- Posts: 554
- Thank you received: 6
You can run a 520/525 sprocket with 530 chain,just need to center chain up on sprocket is all.
Make sure you buy a new rear sprocket to go with the chain
So are you saying I could use a 530 chain with 530 front sprocket and a 525 rear?!
1980 KZ1000 with a 1982 KZ1000J motor with 1100 pistons and heads, Vance & Hines, 29MM Smooth Bores, Work in Progress
Franken Z!
Please Log in or Create an account to join the conversation.
- wireman
- Offline
- User
- The most interesting prick in the world
- Posts: 4761
- Thank you received: 299
posting from deep under a non-descript barn in an undisclosed location southwest of Omaha.
Please Log in or Create an account to join the conversation.
- badrhino
- Topic Author
- Offline
- User
- Posts: 554
- Thank you received: 6
1980 KZ1000 with a 1982 KZ1000J motor with 1100 pistons and heads, Vance & Hines, 29MM Smooth Bores, Work in Progress
Franken Z!
Please Log in or Create an account to join the conversation.
- Hollywoodmx
- Offline
- User
- Posts: 562
- Thank you received: 16
badrhino wrote: I am planning on running a 06-09 GSXR 600/750 rear swinger/wheel combo on my 1980 KZ1000 sometime down the road. I am buying all of the parts so I have them here. I just purchased the rear wheel and it comes with the rotor/sprocket. I noticed that these are running 525 pitch sprocket and I just converted my KZ to the 530 chain and sprockets. I really don't want to have to convert to the 525 (if even possible) to run this set up. Does anyone know if you can get 530 pirch rear sprockets for the newer (06-09) Gsxr 600/750's??? :pinch:
A 20 second search on ebay and it was full of 530 rear sprockets for gsxr. :whistle:
- 82 GPz1100injection
- 77 Kz1075 Supercharged
- 81 Yamaha TR-1
- 81 Yamaha xv920
Calgary
Please Log in or Create an account to join the conversation.
- badrhino
- Topic Author
- Offline
- User
- Posts: 554
- Thank you received: 6
A 20 second search on ebay and it was full of 530 rear sprockets for gsxr.
Not for the 06-09 GSXR 600-750 there isn't. :whistle:
1980 KZ1000 with a 1982 KZ1000J motor with 1100 pistons and heads, Vance & Hines, 29MM Smooth Bores, Work in Progress
Franken Z!
Please Log in or Create an account to join the conversation.
- Hollywoodmx
- Offline
- User
- Posts: 562
- Thank you received: 16
badrhino wrote:
A 20 second search on ebay and it was full of 530 rear sprockets for gsxr.
Not for the 06-09 GSXR 600-750 there isn't. :whistle:
Take this;
www.jtsprockets.com/catalogue/model/5832
And search for the same dimensions on another bike on the website but for 530.
- 82 GPz1100injection
- 77 Kz1075 Supercharged
- 81 Yamaha TR-1
- 81 Yamaha xv920
Calgary
Please Log in or Create an account to join the conversation.
- badrhino
- Topic Author
- Offline
- User
- Posts: 554
- Thank you received: 6
1980 KZ1000 with a 1982 KZ1000J motor with 1100 pistons and heads, Vance & Hines, 29MM Smooth Bores, Work in Progress
Franken Z!
Please Log in or Create an account to join the conversation.
- badrhino
- Topic Author
- Offline
- User
- Posts: 554
- Thank you received: 6
1980 KZ1000 with a 1982 KZ1000J motor with 1100 pistons and heads, Vance & Hines, 29MM Smooth Bores, Work in Progress
Franken Z!
Please Log in or Create an account to join the conversation.
- Powerstroke_fan
- Offline
- User
- Posts: 1017
- Thank you received: 83
1980 kz1000B4 LTD- 1327cc 9-1 comp
Ported J model head
Psp-3x cams
RS 36s
Welded MK11 crank
Back-cut MK11 trans
MTC 2 stage lock up
Stretched 4-6 over running Hayabusa rear rim with 190 rear tire
Complete frame brace kit installed
And Much Much more- SOLD
2014- ZX14R all stock for now
Please Log in or Create an account to join the conversation.