Welder

  • TexasKZ
  • Topic Author
  • Offline
  • Platinum Member
More
27 Sep 2024 11:17 #904656 by TexasKZ
Welder was created by TexasKZ

1982 KZ1000 LTD parts donor
1981 KZ1000 LTD awaiting resurrection
2000 ZRX1100 not ridden enough

Please Log in or Create an account to join the conversation.

More
27 Sep 2024 11:47 - 27 Sep 2024 12:09 #904659 by zed1015
Replied by zed1015 on topic Welder
Seen them popping up on FB and Youtube and for sale on Temu, Ali express and Amazon etc. .
Nothing more than a gimmicky chinese stick welder with a likely lifespan of a couple of weeks if it doesn't electrocute you first.
Personally i'd steer clear and buy a "normal" welder that isn't as awkward and bulky in your hand. ..

AIR CORRECTOR JETS FOR VM CARBS AND ETHANOL RESISTANT VITON CHOKE PLUNGER SEAL REPLACMENT FOR ALL CLASSIC AND MODERN MOTORCYCLE CARBURETTORS
kzrider.com/forum/23-for-sale/611992-air-corrector-jets-





Last edit: 27 Sep 2024 12:09 by zed1015.

Please Log in or Create an account to join the conversation.

  • TexasKZ
  • Topic Author
  • Offline
  • Platinum Member
More
27 Sep 2024 19:01 #904674 by TexasKZ
Replied by TexasKZ on topic Welder
If I steer clear, I might miss a shockingly good time 

1982 KZ1000 LTD parts donor
1981 KZ1000 LTD awaiting resurrection
2000 ZRX1100 not ridden enough

Please Log in or Create an account to join the conversation.

More
27 Sep 2024 20:00 #904679 by sf4t7
Replied by sf4t7 on topic Welder
Hand held flux capacitor?   Doc Brown is still at it...


Scotty

1974 Z1A
1015
welded Z1 crank
Andrews 1X Cams
Delkevic 4 into 1
Superbike bars
530 conversion

Please Log in or Create an account to join the conversation.

More
28 Sep 2024 01:23 #904682 by Wookie58
Replied by Wookie58 on topic Welder
I use a 130amp MIG I bought 25 years ago still works fine (not a vogue brand so reasonable money)

Please Log in or Create an account to join the conversation.

  • TexasKZ
  • Topic Author
  • Offline
  • Platinum Member
More
28 Sep 2024 07:36 #904686 by TexasKZ
Replied by TexasKZ on topic Welder
Everything I know about welding might fill a thimble. I do have some experience with soft and hard soldering with acetylene, but that ain't welding.
I was having a hard time imagining how that hand held device could generate sufficient amperage without weighing too much to be practical. Also, for motorcycle frames and parts, stick welding seems to have gone out of fashion, superseded by wire feed, inert gas welding.

1982 KZ1000 LTD parts donor
1981 KZ1000 LTD awaiting resurrection
2000 ZRX1100 not ridden enough
The following user(s) said Thank You: Wookie58

Please Log in or Create an account to join the conversation.

More
28 Sep 2024 07:53 #904691 by Nessism
Replied by Nessism on topic Welder
I bought a cheapish stick welder off Amazon last year, figuring it would be suitable to help me learn, and build a stand for my lathe.  Well, I learned, but mostly I struggled.  I still don't know if the problem is me or the machine.  More specifically, it's really hard to start.  I stuck the stick more times than I laid beads.  Very frustrating.  
The following user(s) said Thank You: SWest

Please Log in or Create an account to join the conversation.

  • SWest
  • Offline
  • Sustaining Member
  • 10 22 2014
More
28 Sep 2024 08:04 #904692 by SWest
Replied by SWest on topic Welder

I bought a cheapish stick welder off Amazon last year, figuring it would be suitable to help me learn, and build a stand for my lathe.  Well, I learned, but mostly I struggled.  I still don't know if the problem is me or the machine.  More specifically, it's really hard to start.  I stuck the stick more times than I laid beads.  Very frustrating.  
I think you have to hover until it starts. Once it starts keep going. The one I have does the same thing. Far from the Lincoln welder I learned on. "You want cheap you get cheap." (Carl Eckert)

Please Log in or Create an account to join the conversation.

More
28 Sep 2024 08:53 #904694 by Nebr_Rex
Replied by Nebr_Rex on topic Welder

I bought a cheapish stick welder off Amazon last year, figuring it would be suitable to help me learn, and build a stand for my lathe.  Well, I learned, but mostly I struggled.  I still don't know if the problem is me or the machine.  More specifically, it's really hard to start.  I stuck the stick more times than I laid beads.  Very frustrating.  


Turn up your heat, not enough amps to start melting the base metal and filler rod.
The higher the tensile strength the more heat/amps that are needed.
I.E.
60,000lbs- 6010,6011,6013
70,000lbs- 7014,7018
80,000lbs- 8018


.

2002 ZRX1200R
81 GPz1100
79 KZ1000st daily ride
79 KZ1000mk2 prodject
78 KZ650sr
78 KZ650b
81 KZ750e
80 KZ750ltd
77 KZ400/440 cafe project
76 KZ400/440 Fuel Injected

www.dotheton.com/forum/index.php?topic=39120.0


.

Please Log in or Create an account to join the conversation.

  • howardhb
  • Offline
  • Sustaining Member
  • God, I trust
More
28 Sep 2024 09:04 #904697 by howardhb
Replied by howardhb on topic Welder
Something to ALWAYS consider with electrode welding, is the condition on the rods. (electrodes)
The slightest moisture contamination in the flux (around the electrode) will cause the arc to initiate from the flux (which will be conductive because of the moisture) and cause "sticking" and generally bad welds.

Before welding, put the electrodes in the oven at 100°C for an hour or more.
I guarantee much better performance from a simple  "stick" welder.

Store the rods in an airtight container. 

H.

'81 GPz 550 D1
'81 GPz 1100 B1 ELR "Tribute" www.kzrider.com/our-forum/11-projects/61...-elr-tribute?start=0
'82 Yamaha YB100 Fizzie
'79 Suzuki GT200 X5 TWO STROKE TWIN - SMOKER!

Please Log in or Create an account to join the conversation.

More
28 Sep 2024 09:35 #904699 by Nessism
Replied by Nessism on topic Welder
Turning up the amps does help with the start, but it also increases risk of burn through.

What I had to do is to clean the rod and base metal down to shinny clean. removing all oxidation.  That helps the spark to jump.  It's a major pain to do that with every start, though.  

Please Log in or Create an account to join the conversation.

More
28 Sep 2024 11:53 #904700 by Nerdy
Replied by Nerdy on topic Welder
After doing some reading 8-10 years ago, I decided on the basic Harbor Freight wire-feed welder as a learning tool. The main recommendation I saw was to throw the included HF wire as far away as possible and replace it with the proper size wire from a good quality brand, so that's what I did.

It runs on a 120V outlet, which is nice, through strictly speaking it's supposed to be on a 20-amp circuit rather than the more common 15-amp. Running it on 15 requires a shorter duty cycle (welding for a few seconds, then waiting a bit) but it hasn't tripped the breaker yet.

You can get the HF model for under $100 when it's on sale, and the ad will not be full of badly-Photoshopped pictures.

1979 KZ400 Gifted to a couple of nephews
1967 Yamaha YCS1 Bonanza
1980 KZ440B
1981 Yamaha XT250H
1981 KZ440 LTD project bike
1981 GPz550
2013 Yamaha FZ6R
The following user(s) said Thank You: sf4t7, Wookie58

Please Log in or Create an account to join the conversation.

Powered by Kunena Forum