KZR's Bikes of the Month for 2024

New Member on a Kawasaki Zephyr 550 looking for some help....

More
03 Sep 2024 14:32 #903928 by Garacs
Hello everyone!
Being a newcomer first of all I would like to present myself: I am 51, living in Berlin, Germany, and recently bought a 1991 Kawasaki Zepyhr 550 to restore. I bought it cheap and worked on it in my spare time. I do have mechanical experience, having owned several bikes and scooters (2T and 4T) in the past, so I am not a complete newbie.

The bike was not running, it had been stored in a garage for some 5 years (as far as I know, maybe more) and was needing a full rebuild, so that's what I did.

I rebuilt both front brakes and rear brakes, installed new brake pads, new fluids, cleaned carbs, new forks oil and even new set of rear shocks (mine were busted). New black paint job (it had been already repained several times, from green to red to black...) and before installing new tires for the legal inspection and registratino, I tried to fire it up... and now the story begins....A small video I made like a month ago, after finishing with the painting. That is a cold start. Yet something is off...

This is my bike sorted out esthetically, but not mechanically still

Looking to get help from more experienced guys here!

Please Log in or Create an account to join the conversation.

  • Street Fighter LTD
  • Offline
  • Moderator
  • TURBO, Its Better to be Blown than Injected
More
04 Sep 2024 05:03 #903948 by Street Fighter LTD
Replied by Street Fighter LTD on topic New Member on a Kawasaki Zephyr 550 looking for some help....
Welcome to the site.
Nice bike . 
Your other thread is released
Dave


Original owner 78 1000 LTD
Mr Turbo Race Kit, MTC 1075 Turbo pistons by PitStop Performance , Falicon Ultra Lite Super Crank, APE everything. Les Holt @ PDM's Billet Goodies . Frame by Chuck Kurzawa @ Logghe Chassis . Deep sump 5qt oil pan. RIP Bill Hahn
The following user(s) said Thank You: Garacs

Please Log in or Create an account to join the conversation.

  • Wookie58
  • Away
  • Moderator
More
  • Mcdroid
  • Away
  • User
  • Gone Kwackers
More
04 Sep 2024 16:05 #903975 by Mcdroid
Welcome to KZRider...I like the Zephyrs...nice save.

Michael
Victoria, Texas

1982 GPz750
1977 KZ1000A
1978 KZ1000A
1982 GPz1100
1975 Z2A

The following user(s) said Thank You: Garacs

Please Log in or Create an account to join the conversation.

More
06 Sep 2024 06:37 #904021 by moizeau
Welcome from France. Nice looking Zeph. I had one at 21 and loved it, so much so I bought an 11.
The following user(s) said Thank You: Garacs

Please Log in or Create an account to join the conversation.

More
08 Sep 2024 13:27 #904099 by Stereordinary
Welcome! I’ve got a Zephyr 550 myself (two of them actually, but I’m selling one currently). They’re great bikes. I’ll look out for your threads and offer help where I can. 

A breeze from the west.
‘90 ZR550 Zephyr

Please Log in or Create an account to join the conversation.

More
16 Nov 2024 01:17 #906090 by Garacs
And I am finally back... After a lot of waiting for parts and personal stuff going on, I finally managed last week to put my hands back on the bike. I replaced the chain tensioner (which I found out was broken inside, kinda like I was when I found out....) and the pilot screws with some compatible thumb screws I found on the net. In the end all the issues were caused exactly by a misregulation of the pilot screws..

Basically the Haynes manual states that these should be set to 2,5 turns out max. So I did. And I was wrong. A mechanic I met, who has the same bike, told me to set them to 1 3/4 turns out. Lo and behold, after some sputtering the bike started fine and held the idle speed.

The only issue now is that when blipping the throttle, the RPMs stay high. So another carb cleaning was de (my tenth...) and now I am about to reinstall the carbs on the bike.

Will keep you posted. 

Please Log in or Create an account to join the conversation.

More
16 Nov 2024 07:44 #906099 by Nessism
Most of the time, a hanging idle is because of a vacuum leak.  Most common offender is the rubber carb boots that bolt to the head.  Remove them and flex, looking for cracks.  Or just replace them, if still available.  Rubber parts are short for the world after 40+ years.

Please Log in or Create an account to join the conversation.

  • Scirocco
  • Offline
  • Premium Member
  • Never change a running system
More
16 Nov 2024 11:38 - 16 Nov 2024 11:38 #906103 by Scirocco
Welcome from Germany

A carb sync is nessesary and I know from experience that the carb rubber boots are the source of your trouble. The stock jet setup is also very lean (idle and main jets), so any little air leak can cause probs like yours.
 
Last edit: 16 Nov 2024 11:38 by Scirocco.

Please Log in or Create an account to join the conversation.

Powered by Kunena Forum

If you like KZR Please consider making a donation. Thank you.

KZRider is free, but not without cost.

Please consider chipping in a few bucks to help cover the cost of running the KZR servers.