KZR's Bikes of the Month for 2024

Bike of the Month.

  • slmjim+Z1BEBE
  • Offline
  • User
  • Enjoy Life! IT HAS AN EXPIRATION DATE!
More
03 May 2024 05:44 #898401 by slmjim+Z1BEBE
Replied by slmjim+Z1BEBE on topic Bike of the Month.
Ah yes..., The Wounded Z.  Death by a thousand rust & corrosion pits.  It was not just a project; it became a Project.  The capital 'P' is earned when the item or workpiece extracts a blood sacrifice.  Still blood spots on the shop floor ( gives it 'shop cred... ' ).
(Legal disclaimer - No motorcycles or motorcycle parts were injured during this Project.)

We really struggled with how to approach this bike's original finishes.  Had the motor not been stuck & two cylinders not been filled with the pictured mystery goo (seen in the linked thread), we would not have done a frame-off or split the cases.  We'd have left the OEM finishes as-found & just cleaned.  Age patina on steroids.  Considering what we found in the two cylinders, we didn't trust that the crank & tranny were in operational condition.  Turns out they were in VGC. 

Other stuff: The hollow cams were a real surprise.  The way the #60(!) chain squeaked & shed rust was disturbing as the rear wheel rotated when we wheeled it into the shop.  One (only 1!) cotter pin in the master link of that farm implement chain .  Carb slides not stuck!  VIN sticker in VGC.  Near-rust-free tank internals (still don't understand that) !.  The contrasts of the varying conditions of the parts on this bike were remarkable.

Seeing as how the cases were split, we decided it was appropriate to paint the motor, which would have presented a very glaring contrast if reinstalled in the rusted / pitted frame & associated ferrous parts.  Paint one, paint the other.  The deeply-pitted & corroded polished aluminum motor covers had to be dealt with too, so as to not detract from the fresh motor paint.  Everything else was cleaned & refurbed, leaving as much patina as possible.  We're still astonished at how well jewelers rouge & hours of patient rubbing by The Lovely Z1BEBE brought back the OEM tankset paint.  Then there was needed chrome; the rims, and torque link, and starter cover, and..., and..., and...

Speaking of The Lovely Z1BEBE; this Project was her first foray into the joys of a click torque wrench.  A monster resulted.  slmjim quickly learned that he had created a shop-dwelling being that he'd best not get between and a case (or any other) fastener needing torqued.  To her good nature & work ethic, she only whined a little about the war paint on her nails while at the wire wheel .  Her time at the vapor blast cabinet is now the stuff of family legend.

This bike was a fun & challenging Project.  They're out there, although becoming increasingly rare, just waiting to be discovered & brought back to life.  Seems we've heard of a KZ900 here on KZR recently that the owner is interested in making ready as his next project.  Or Project.

Thanks for the kudos everyone!  We truly appreciate it.  This stroll down memory lane has reawakened many fond memories.

Good Ridin'
slmjim & Z1BEBE

A biker looks at your engine and chrome.
A Rider looks at your odometer and tags.

1973 ('72 builds) Z1 x2
1974 Z1-A x2
1975 Z1-B x2
1993 CB 750 Nighthawk x2
2009 ST1300A

www.kawasaki-z-classik.com
An enthusiast's forum focused exclusively
on all things Z1, Z2 and KZ900.

The following user(s) said Thank You: Mcdroid, willemZ900, daveo, 78kawltd, calum, howardhb, Wookie58

Please Log in or Create an account to join the conversation.

More
04 May 2024 14:22 #898470 by Wheelhop
Replied by Wheelhop on topic Bike of the Month.
Nice work !

1978 KZ 1000B (73 tribute)
1977 KZ1000 project
1976 KZ 900
1976 KV 75
1976 Honda Elsinore MT250
1974 Z1 900 project
1971 Honda CT70
2000 ZRX 1100

Please Log in or Create an account to join the conversation.

  • z1kzonly
  • Offline
  • User
  • Sustaining Member
More
05 May 2024 14:43 #898531 by z1kzonly
Replied by z1kzonly on topic Bike of the Month.
Excellent Save & Work Slim & Mrs.!
You do Very Nice Work Jim!! It helps to love what you do! With that Z1 addiction!
I miss having a complete Z1-KZ!  All those parts! All those years! I hustled them, almost 48 years now!
Still have some miscellaneous part restores going!
Old Harley dragbike project. Got my Z1 disc's machined down for the Z1 hub 6 bolt with an 18" Akront.  Interesting project this is.
We got my shop partners Supercharged AA/Gasser ready. (Caged Heat)
We'll be at the old Thompson, OH. now "KUHNLE" Dragstrip June, 1-2

Marty in Buffalo

Livin in "CheektaVegas, NY
Went thru 25 of these in 40 yrs.
I SOLD OUT! THE KAW BARN IS EMPTY.
More room for The Old Girl, Harley 75 FLH Electra Glide,
Old faithful! Points ign. Bendix Orig. carb.
Starts everytime!

Please Log in or Create an account to join the conversation.

  • Wookie58
  • Away
  • Moderator
More
01 Jun 2024 01:41 #900070 by Wookie58
Replied by Wookie58 on topic Bike of the Month.
It's that time of the month again where we celebrate another great restoration of an old KZ. We are in Germany this month for Calum's stunning 750Ltd.Here's a brief history of the bike: 1980 KZ750H (Ltd)My Dad had it rusting away in a corner of his shed in northern BC, Canada. He swapped some mining stuff for it a while back. He said he'd pay the freight to Germany if I paid customs and if it looked like a new bike when I was finished. I went back over to Canada and serviced the brakes and the shocks, then we took it down as far as Quesnel on the trailer and I rode down to Vancouver over the next two days (about 600km).Got it back to Germany on the 3rd of May 2019 and rode it home from Frankfurt (about 300km). Completely disassembled it and restored it as per my project thread ( KZ750H Restoration - KZRider Forum - KZRider, KZ, Z1 & Z Motorcycle Enthusiast's Forum  I bolted the tank on (at the time, this was the final piece) exactly a year to the day after getting it home. Most of the parts are original (restored or NOS), the indicators and taillight are replica parts. The only non-original and non-replica parts are the handlebars (I have the originals on the shelf and did try to use them, but they're just too narrow). The paint is Kawasaki Ebony Black but no pin stripes on the tank and the motor isn't usually painted on this model, but the crankcase was in pretty bad shape so I used the black paint to hide it ;) I actually like it better with the black engine though. So all in all it's almost a "proper" restoration, but with a few personal touches.



































The following user(s) said Thank You: Mcdroid, slmjim+Z1BEBE, ThatGPzGuy, Street Fighter LTD, sf4t7, howardhb

Please Log in or Create an account to join the conversation.

  • howardhb
  • Away
  • Sustaining Member
  • God, I trust
More
01 Jun 2024 03:02 #900072 by howardhb
Replied by howardhb on topic Bike of the Month.
Well done Sir! 

You have some fine skills!

​​​​​I too like the engine black...

H.

'81 GPz 550 D1
'81 GPz 1100 B1 ELR "Tribute" www.kzrider.com/11-projects/617040-1981-...-rstomod-elr-tribute
'82 Yamaha YB100 Fizzie
'79 Suzuki GT200 X5 TWO STROKE TWIN - SMOKER!
The following user(s) said Thank You: calum

Please Log in or Create an account to join the conversation.

  • Scirocco
  • Offline
  • Premium Member
  • Never change a running system
More
01 Jun 2024 04:22 #900075 by Scirocco
Replied by Scirocco on topic Bike of the Month.
Germanys next Top Model, Calum did  a perfect rebuild as always without Heidi Klum. 
The following user(s) said Thank You: calum

Please Log in or Create an account to join the conversation.

More
01 Jun 2024 05:43 #900077 by Wheelhop
Replied by Wheelhop on topic Bike of the Month.
Great work and cool to keep it in the family.

1978 KZ 1000B (73 tribute)
1977 KZ1000 project
1976 KZ 900
1976 KV 75
1976 Honda Elsinore MT250
1974 Z1 900 project
1971 Honda CT70
2000 ZRX 1100
The following user(s) said Thank You: calum

Please Log in or Create an account to join the conversation.

  • Street Fighter LTD
  • Topic Author
  • Offline
  • Moderator
  • TURBO, Its Better to be Blown than Injected
More
01 Jun 2024 06:39 #900080 by Street Fighter LTD
Replied by Street Fighter LTD on topic Bike of the Month.
A fine example of what can be done to restore a classic Kawasaki.
Your workmanship is awesome !!!!!
Dave


Original owner 78 1000 LTD
Mr Turbo Race Kit, MTC 1075 Turbo pistons by PitStop Performance , Falicon Ultra Lite Super Crank, APE everything. Les Holt @ PDM's Billet Goodies . Frame by Chuck Kurzawa @ Logghe Chassis . Deep sump 5qt oil pan. RIP Bill Hahn
The following user(s) said Thank You: calum

Please Log in or Create an account to join the conversation.

More
01 Jun 2024 07:48 #900086 by Stereordinary
Replied by Stereordinary on topic Bike of the Month.
A full tear down and rebuild in a year, wow!

A breeze from the west.
‘90 ZR550 Zephyr
The following user(s) said Thank You: calum

Please Log in or Create an account to join the conversation.

More
01 Jun 2024 15:16 #900095 by sf4t7
Replied by sf4t7 on topic Bike of the Month.
High quality work.  The black engine was the right choice.


Scotty

1974 Z1A
1015
welded Z1 crank
Andrews 1X Cams
Delkevic 4 into 1
Superbike bars
530 conversion
The following user(s) said Thank You: calum

Please Log in or Create an account to join the conversation.

  • Buzz Nichols
  • Offline
  • Sustaining Member
More
03 Jun 2024 04:55 #900142 by Buzz Nichols
Replied by Buzz Nichols on topic Bike of the Month.
Beautiful work. Well done!

Is this thing working? Is this thing on?

1978 KZ1000 LTD
The following user(s) said Thank You: calum

Please Log in or Create an account to join the conversation.

More
05 Jun 2024 20:20 #900320 by Sifu
Replied by Sifu on topic Bike of the Month.
Fantastic 
The following user(s) said Thank You: calum

Please Log in or Create an account to join the conversation.

Powered by Kunena Forum

If you like KZR Please consider making a donation. Thank you.

KZRider is free, but not without cost.

Please consider chipping in a few bucks to help cover the cost of running the KZR servers.