KZR's Bikes of the Month for 2024

Gpz550 ignition issue

More
13 Jun 2024 05:45 - 13 Jun 2024 05:47 #900654 by Ant_5445
Gpz550 ignition issue was created by Ant_5445
Got a weird problem on my hands that im trying to get to the bottom of. '81 gpz550 with a set of CR26 carbs on it, runs good, pretty peppy on the road, however i've noticed a couple times that it'll have a weird idle to it. Messing around the other day and i pulled off one of the spark plug boots on cylinder 4 and there was no noticeable change in the idle. Now, when i do the same thing to the other 3 cylinders the idle goes low and the bike stalls, naturally. Now the weird thing is that I've touched the cylinder 4 pipe and its the same temp as the other ones when idling, so it seems that it is firing? I've cleaned the pilot jet with no change. I've checked spark on cylinder 4 and even swapped plugs, coils, spark plugs, wires ect...no change. Is this a deeper issue like valves needing adjustment? 

'99 Zrx 1100
'81 Gpz 550
Last edit: 13 Jun 2024 05:47 by Ant_5445.

Please Log in or Create an account to join the conversation.

More
13 Jun 2024 05:53 #900656 by Wookie58
Replied by Wookie58 on topic Gpz550 ignition issue
Have you checked valve clearances and compression (sounds like one cylinder isn't working as hard as the others)

Please Log in or Create an account to join the conversation.

More
13 Jun 2024 06:31 #900658 by Ant_5445
Replied by Ant_5445 on topic Gpz550 ignition issue
Thats what my next step is going to be when i get home later. Ill check compression first then continue on if that checks out, maybe even throw a new spark plug at it just for the hell of it. Might have to hold out and find some time to check the clearances though. 

'99 Zrx 1100
'81 Gpz 550
The following user(s) said Thank You: Wookie58

Please Log in or Create an account to join the conversation.

More
13 Jun 2024 06:36 #900659 by Wookie58
Replied by Wookie58 on topic Gpz550 ignition issue

Thats what my next step is going to be when i get home later. Ill check compression first then continue on if that checks out, maybe even throw a new spark plug at it just for the hell of it. Might have to hold out and find some time to check the clearances though. 
Tight valves will effect compression
Loose valves will mean reduced opening time so less flow "In" and "Out"

Please Log in or Create an account to join the conversation.

More
17 Jun 2024 12:01 #900890 by Ant_5445
Replied by Ant_5445 on topic Gpz550 ignition issue
Ended up being a clogged pilot jet which was strange because that was the first thing i tried was taking the bowl off the carb when it was on the bike and squirting some carb cleaner through it...i guess i just needed to take the whole carb off and do a better job at cleaning. Then i was in such a hurry to make it somewhere with the bike that i forgot to re install the pilot jet! No wonder why it was still acting up on me afterwards and making me scratch my head haha!

'99 Zrx 1100
'81 Gpz 550

Please Log in or Create an account to join the conversation.

Powered by Kunena Forum

If you like KZR Please consider making a donation. Thank you.

KZRider is free, but not without cost.

Please consider chipping in a few bucks to help cover the cost of running the KZR servers.