KZR's Bikes of the Month for 2024

Engine Oil Choices for a Z1

More
24 Jun 2024 21:52 #901278 by Cra-z1
Replied by Cra-z1 on topic Engine Oil Choices for a Z1
I would not go the RTV or Honda bond route. Make your gaskets. The screws are JIS so make sure you have a good JIS driver. AS far as torque I would tighten down each screw evenly with as much as you can deliver with your hand. Start with one gasket, tighten down the cover and if it binds or of you feel it dragging put another gasket on. Once you are satisfied remover each screw one at a time and put a dab of blue locktite on each one.
The following user(s) said Thank You: sdinse

Please Log in or Create an account to join the conversation.

Powered by Kunena Forum

If you like KZR Please consider making a donation. Thank you.

KZRider is free, but not without cost.

Please consider chipping in a few bucks to help cover the cost of running the KZR servers.