KZR's Bikes of the Month for 2024

Zukiworks build's a ZRX

  • Street Fighter LTD
  • Offline
  • Moderator
  • TURBO, Its Better to be Blown than Injected
More
14 Dec 2017 17:49 #776051 by Street Fighter LTD
Replied by Street Fighter LTD on topic Zukiworks build's a ZRX
Please make sure you use acid in a well ventilated area.
Just looking out for your lungs.
Breathing is a very basic function
Dave B) B) B)

Original owner 78 1000 LTD
Mr Turbo Race Kit, MTC 1075 Turbo pistons by PitStop Performance , Falicon Ultra Lite Super Crank, APE everything. Les Holt @ PDM's Billet Goodies . Frame by Chuck Kurzawa @ Logghe Chassis . Deep sump 5qt oil pan. RIP Bill Hahn

Please Log in or Create an account to join the conversation.

More
14 Dec 2017 18:40 #776052 by zukdave
Replied by zukdave on topic Zukiworks build's a ZRX
Dave I'm thinking after spending the last 40 + years in a shop I've inhaled enough shit I'm a walking haz-mat. site.

I did do this outside by the way.
1980 KZ650 F1
ZX750A1 motor.
Wiseco 810cc kit.
Zukiworks racing ported head.
VM 29 smooth bore's.
Dyna 2000 Ign. w/Dyna mini coil's
APE cylinder stud's and nut's.
APE valve spring's.
APE Track King clutch.
V/H KZ1000 sidewinder.
3.5x18 laced to a KZ1000 disk hub.
150/60/18 Shinko 006 Podium.
63" wheel base.

Please Log in or Create an account to join the conversation.

More
14 Dec 2017 18:53 #776053 by zukdave
Replied by zukdave on topic Zukiworks build's a ZRX
I've got a spare set of heel gaurds so thought I'd play with them and the drill press.
Stock.
[img

Drilled. After this pic I added another row of holes but didn't get a pic tonight.
[img
1980 KZ650 F1
ZX750A1 motor.
Wiseco 810cc kit.
Zukiworks racing ported head.
VM 29 smooth bore's.
Dyna 2000 Ign. w/Dyna mini coil's
APE cylinder stud's and nut's.
APE valve spring's.
APE Track King clutch.
V/H KZ1000 sidewinder.
3.5x18 laced to a KZ1000 disk hub.
150/60/18 Shinko 006 Podium.
63" wheel base.

Please Log in or Create an account to join the conversation.

More
15 Dec 2017 17:41 #776104 by zukdave
Replied by zukdave on topic Zukiworks build's a ZRX
Heres the finished heel guards.
[img

[img
1980 KZ650 F1
ZX750A1 motor.
Wiseco 810cc kit.
Zukiworks racing ported head.
VM 29 smooth bore's.
Dyna 2000 Ign. w/Dyna mini coil's
APE cylinder stud's and nut's.
APE valve spring's.
APE Track King clutch.
V/H KZ1000 sidewinder.
3.5x18 laced to a KZ1000 disk hub.
150/60/18 Shinko 006 Podium.
63" wheel base.

Please Log in or Create an account to join the conversation.

  • SWest
  • Offline
  • Sustaining Member
  • 10 22 2014
More
15 Dec 2017 18:03 #776108 by SWest
Replied by SWest on topic Zukiworks build's a ZRX
Nice work. How well does that exhaust work?
Steve
Z1b1000 1975 Z1b
kzrider.com/forum/11-projects/598262-kz-...-will-it-live#672882
kzrider.com/forum/2-engine/597654-poser?start=240#704229

Please Log in or Create an account to join the conversation.

More
17 Dec 2017 16:31 #776236 by zukdave
Replied by zukdave on topic Zukiworks build's a ZRX
Steve the pipe works great and is not to loud. I sold my buddy Dan the spare Muzzy left side pipe I had with a diff.
mid pipe and can and his ZRX is a lot louder.
1980 KZ650 F1
ZX750A1 motor.
Wiseco 810cc kit.
Zukiworks racing ported head.
VM 29 smooth bore's.
Dyna 2000 Ign. w/Dyna mini coil's
APE cylinder stud's and nut's.
APE valve spring's.
APE Track King clutch.
V/H KZ1000 sidewinder.
3.5x18 laced to a KZ1000 disk hub.
150/60/18 Shinko 006 Podium.
63" wheel base.
The following user(s) said Thank You: SWest

Please Log in or Create an account to join the conversation.

More
19 Dec 2017 19:38 #776383 by zukdave
Replied by zukdave on topic Zukiworks build's a ZRX
I think I've posted about how the lower shock mounts on the swing arm are in to far and pull the
bottom of the shocks in so tonight got to looking at what I need to do to fix that.
Simple fix cut them off and make new mounts and have them welded on arm's cro-mo I don't have a Tig welder

Got to thinkin and came up with a way to use the mounts that are on it and make some adjustable mount's.
Cut a 2" thick piece off a 4x4x12 piece of alum I've got and fired up the getto mill.
[img

[img

[img
1980 KZ650 F1
ZX750A1 motor.
Wiseco 810cc kit.
Zukiworks racing ported head.
VM 29 smooth bore's.
Dyna 2000 Ign. w/Dyna mini coil's
APE cylinder stud's and nut's.
APE valve spring's.
APE Track King clutch.
V/H KZ1000 sidewinder.
3.5x18 laced to a KZ1000 disk hub.
150/60/18 Shinko 006 Podium.
63" wheel base.

Please Log in or Create an account to join the conversation.

More
23 Dec 2017 06:21 #776536 by riturbo
Replied by riturbo on topic Zukiworks build's a ZRX
Nice job . Bikes coming along great
Gpz 750 turbo The one I ride
Gpz 750 turbo Not finished
Gpz 750 turbo Not started
Gpz 550 1981
Gpz 550 1983
Bunch of other junk

Please Log in or Create an account to join the conversation.

More
23 Dec 2017 16:36 #776565 by zukdave
Replied by zukdave on topic Zukiworks build's a ZRX

riturbo wrote: Nice job . Bikes coming along great


Thanks !! Got it out for a ride the other night and pulled the wick up real hard at the top of third and into fourth
it was trying to lift the fornt tire. Top of fifth this B^%%& was rolling.
1980 KZ650 F1
ZX750A1 motor.
Wiseco 810cc kit.
Zukiworks racing ported head.
VM 29 smooth bore's.
Dyna 2000 Ign. w/Dyna mini coil's
APE cylinder stud's and nut's.
APE valve spring's.
APE Track King clutch.
V/H KZ1000 sidewinder.
3.5x18 laced to a KZ1000 disk hub.
150/60/18 Shinko 006 Podium.
63" wheel base.

Please Log in or Create an account to join the conversation.

More
26 Dec 2017 00:16 #776619 by zukdave
Replied by zukdave on topic Zukiworks build's a ZRX
[img

[img
1980 KZ650 F1
ZX750A1 motor.
Wiseco 810cc kit.
Zukiworks racing ported head.
VM 29 smooth bore's.
Dyna 2000 Ign. w/Dyna mini coil's
APE cylinder stud's and nut's.
APE valve spring's.
APE Track King clutch.
V/H KZ1000 sidewinder.
3.5x18 laced to a KZ1000 disk hub.
150/60/18 Shinko 006 Podium.
63" wheel base.

Please Log in or Create an account to join the conversation.

More
26 Dec 2017 18:14 #776635 by zukdave
Replied by zukdave on topic Zukiworks build's a ZRX
I've had one of these Raptor two stage shift light;s I bought a few years ago and never used so think I'll finally use it and put it on this bike.
www.raptorperformance.com/collections/sh...i-shift-launch-light
1980 KZ650 F1
ZX750A1 motor.
Wiseco 810cc kit.
Zukiworks racing ported head.
VM 29 smooth bore's.
Dyna 2000 Ign. w/Dyna mini coil's
APE cylinder stud's and nut's.
APE valve spring's.
APE Track King clutch.
V/H KZ1000 sidewinder.
3.5x18 laced to a KZ1000 disk hub.
150/60/18 Shinko 006 Podium.
63" wheel base.

Please Log in or Create an account to join the conversation.

More
10 Jan 2018 05:07 - 10 Jan 2018 05:09 #777142 by zukdave
Replied by zukdave on topic Zukiworks build's a ZRX
Had this thing out last Sunday for a little ride to do some launch practice time to learn how to ride it.
Cold street so a good burn out to get some heat in the tire for the first hard launch bring the rpm's up to about 5000 rpm
slide the clutch out and pin the throttle and it's all I could do to fight the wheelie.
Second gear more wheelie's but could ride it out hit third gear it's still trying to lift the front tire and is flat hauling ass.
1980 KZ650 F1
ZX750A1 motor.
Wiseco 810cc kit.
Zukiworks racing ported head.
VM 29 smooth bore's.
Dyna 2000 Ign. w/Dyna mini coil's
APE cylinder stud's and nut's.
APE valve spring's.
APE Track King clutch.
V/H KZ1000 sidewinder.
3.5x18 laced to a KZ1000 disk hub.
150/60/18 Shinko 006 Podium.
63" wheel base.
Last edit: 10 Jan 2018 05:09 by zukdave.

Please Log in or Create an account to join the conversation.

Powered by Kunena Forum

If you like KZR Please consider making a donation. Thank you.

KZRider is free, but not without cost.

Please consider chipping in a few bucks to help cover the cost of running the KZR servers.