KZR's Bikes of the Month for 2024

Keihin CR Help

More
31 Jul 2024 12:50 #902687 by mikeyt62
Keihin CR Help was created by mikeyt62
I just purchased these thinking they were 33mm because of the stamping on them, but when I measured them they came up saying 35mm...what do I have???

Please Log in or Create an account to join the conversation.

More
31 Jul 2024 13:06 #902689 by TexasKZ
Replied by TexasKZ on topic Keihin CR Help
Measure the outlet (engine side) of the bore.
1982 KZ1000 LTD parts donor
1981 KZ1000 LTD awaiting resurrection
2000 ZRX1100 not ridden enough

www.kzrider.com/11-projects/620336-anoth...uild-thread?start=24
The following user(s) said Thank You: mikeyt62

Please Log in or Create an account to join the conversation.

More
31 Jul 2024 13:27 #902691 by mikeyt62
Replied by mikeyt62 on topic Keihin CR Help
That is the outlet/engine side of the carb
 

Please Log in or Create an account to join the conversation.

  • Wookie58
  • Away
  • Moderator
More
31 Jul 2024 13:33 #902692 by Wookie58
Replied by Wookie58 on topic Keihin CR Help
Does the bore taper inwards towards the slide (down to 33)
 
1982 KZ1000 Ltd
www.kzrider.com/forum/11-projects/617631...-82-begins?start=192
kzrider.com/filebase-alias?view=download...d-fault-diagnosis&ca
The following user(s) said Thank You: mikeyt62

Please Log in or Create an account to join the conversation.

  • DOHC
  • Offline
  • Sustaining Member
  • Those Doe-Hawks really go!
More
31 Jul 2024 16:00 #902697 by DOHC
Replied by DOHC on topic Keihin CR Help
On the engine side, the aluminum piece is removable.  These come in different lengths and diameters and some of them have an internal taper. 

Remove the aluminum tube and measure the inside of the bore where it threads in.
'78 Z1-R in blue , '78 Z1-R in black, '78 Z1-R in pieces
My dad's '74 Z1
'00 ZRX1100
The following user(s) said Thank You: mikeyt62

Please Log in or Create an account to join the conversation.

More
31 Jul 2024 16:46 #902699 by mikeyt62
Replied by mikeyt62 on topic Keihin CR Help
Yep it did...they are 33mm
The following user(s) said Thank You: Wookie58

Please Log in or Create an account to join the conversation.

More
31 Jul 2024 16:47 #902700 by mikeyt62
Replied by mikeyt62 on topic Keihin CR Help
I did and they are 33mm...thanks!
 

Please Log in or Create an account to join the conversation.

More
31 Jul 2024 17:36 #902704 by Injected
Replied by Injected on topic Keihin CR Help
Did you get a good deal on those? I know you were looking for carbs recently.

Please Log in or Create an account to join the conversation.

  • gd4now
  • Offline
  • User
  • Denco where did you go?
More
31 Jul 2024 17:37 - 31 Jul 2024 17:44 #902705 by gd4now
Replied by gd4now on topic Keihin CR Help
Sounds like you got it sorted, but with the new format I wanted to see what adding a doc (pdf) would work/look like. Not sure if you have this or not, but here you go. 

OK that did not work when I attempted to insert the pdf lets see if I do not insert it?

It does not appear to have worked either?
1977 KZ650 B1
Pods and Denco header

OLD KAW OWNERS SMILE ALOT
Attachments:
Last edit: 31 Jul 2024 17:44 by gd4now.

Please Log in or Create an account to join the conversation.

  • DoctoRot
  • Offline
  • Sustaining Member
  • Oh, the usual... I bowl, I drive around...
More
31 Jul 2024 18:29 #902709 by DoctoRot
Replied by DoctoRot on topic Keihin CR Help
Those spigots unscrew and you can swap them out for different ones, I've made some custom ones to adapt FCRs to a KZ750. Ideally the bore is tapering towards the engine, not the other way around.
'78 1000 Long Term Project
 '80 750G
 750 Twin Big Bore Track Bike
The following user(s) said Thank You: Wookie58

Please Log in or Create an account to join the conversation.

  • Wookie58
  • Away
  • Moderator
More
01 Aug 2024 00:30 #902721 by Wookie58
Replied by Wookie58 on topic Keihin CR Help
This has worked just fine GD4, if you click on the attachment you can then download it (windows10 on "Edge") the later versions seem sensitive to the system you are using. After the last update my old I-pad couldn't access the filebase and now I can't reply to posts with it !!!!
1982 KZ1000 Ltd
www.kzrider.com/forum/11-projects/617631...-82-begins?start=192
kzrider.com/filebase-alias?view=download...d-fault-diagnosis&ca

Please Log in or Create an account to join the conversation.

Powered by Kunena Forum

If you like KZR Please consider making a donation. Thank you.

KZRider is free, but not without cost.

Please consider chipping in a few bucks to help cover the cost of running the KZR servers.