KZR's Bikes of the Month for 2024

Drain plug size

More
29 Nov 2024 04:19 #906479 by Maxbou92
Replied by Maxbou92 on topic Drain plug size
Damn.. can I use a tap to transform the 1pinch to 0.75mm to my fitting?!

Kz750e 1980

Please Log in or Create an account to join the conversation.

More
29 Nov 2024 05:15 #906481 by zed1015
Replied by zed1015 on topic Drain plug size

Damn.. can I use a tap to transform the 1pinch to 0.75mm to my fitting?!
If you have an m6 x 0.75mm DIE you could simply make the fitting from scratch using 6mm brass rod or tube but you could run it down the 1mm pitched barb to overlay the 0.75mm thread to enable it to screw into the bowl.
The overlaid 0.75mm thread will be hit and miss though as it removes 2/3rds of the 1mm peaks and miss aligns on the troughs etc so will only be able to be screwed in lightly by hand and care must be taken that it doesn't cross thread on the start.

 

AIR CORRECTOR JETS FOR VM CARBS AND ETHANOL RESISTANT VITON CHOKE PLUNGER SEAL REPLACMENT FOR ALL CLASSIC AND MODERN MOTORCYCLE CARBURETTORS
www.kzrider.com/23-for-sale/611992-air-c...lide-mikunis?start=0





The following user(s) said Thank You: Maxbou92

Please Log in or Create an account to join the conversation.

  • Kaw-boy 900
  • Offline
  • User
  • Let the Good ''Old'' Time Rool !
More
30 Nov 2024 14:01 - 30 Nov 2024 14:14 #906518 by Kaw-boy 900
Replied by Kaw-boy 900 on topic Drain plug size
 I received from Amazon 10 x plastic 6mm Hose Barb M6 External Threadfor 15$ CDN.
They are not .75 mm tread but I was able to fit them without damaging the bowl treads. 

Please dont give me sxxt for the bowl damage....blame the previous owner or his mechanic 
By the way, I would like to replace them but could'nt find them anywhere.

Kawasaki:
S1 250 triple 1973
H1, 500 triple 1975
LTD 1000, 1982
Ninja 1000R 1987
Ninja ZX12R 2006
KZ900 1976.
Yamaha RD 350 1973
Ducati 1098 2007
Harley Softail 2009 For sale !
Last edit: 30 Nov 2024 14:14 by Kaw-boy 900.
The following user(s) said Thank You: slmjim+Z1BEBE

Please Log in or Create an account to join the conversation.

More
30 Nov 2024 14:15 #906519 by Maxbou92
Replied by Maxbou92 on topic Drain plug size
Plastic is not supposed to damage the thread I guess!! I will try with rubber plug screw in it 

Kz750e 1980

Please Log in or Create an account to join the conversation.

  • Kaw-boy 900
  • Offline
  • User
  • Let the Good ''Old'' Time Rool !
More
08 Dec 2024 08:36 #906739 by Kaw-boy 900
Replied by Kaw-boy 900 on topic Drain plug size
A follow up with the plastic bart hose, after inserting them once they become with the same thread as the drainage screw and easy to reuse them...@ $1.50 each 


Kawasaki:
S1 250 triple 1973
H1, 500 triple 1975
LTD 1000, 1982
Ninja 1000R 1987
Ninja ZX12R 2006
KZ900 1976.
Yamaha RD 350 1973
Ducati 1098 2007
Harley Softail 2009 For sale !

Please Log in or Create an account to join the conversation.

More
08 Dec 2024 08:39 #906740 by Maxbou92
Replied by Maxbou92 on topic Drain plug size
Nicee man!! I will check on amazon

Kz750e 1980

Please Log in or Create an account to join the conversation.

Powered by Kunena Forum

If you like KZR Please consider making a donation. Thank you.

KZRider is free, but not without cost.

Please consider chipping in a few bucks to help cover the cost of running the KZR servers.