KZR's Bikes of the Month for 2024

Going in on eBay electric ignition for 650SR. Suggestions?

More
30 Sep 2024 08:44 #904741 by chopper1963
1978 KZ650SR.

These bikes have basically little to no resale value so sticking a big $$$$ electronic ignition on it makes little sense.

There are ebay kits to convert the points ignition to electronic for $60 or so. Has anyone where had good luck with an ebay seller or should I just do the usual ebay due dillagence?

I have a parts bike 1979 KZ650SR but never looked to see if that is points or electronic ignition.

Suggestions welcome.

Please Log in or Create an account to join the conversation.

  • Wookie58
  • Away
  • Moderator
More
30 Sep 2024 08:55 #904742 by Wookie58
Is this the "Copy" Dyna "S" ? - if so there are a few posts regarding these, generally people seem to have done OK with them
The following user(s) said Thank You: Warren3200gt

Please Log in or Create an account to join the conversation.

More
30 Sep 2024 10:49 #904745 by Warren3200gt
I've fitted several of the Chinesium Dyna systems to bikes for people. Never had one fail electronically only had one cause an issue where the trigger magnet fell out. Glued it back in and been good ever since. 


Z1000J2 somewhat modified!

The following user(s) said Thank You: Wookie58

Please Log in or Create an account to join the conversation.

More
30 Sep 2024 11:32 #904747 by chopper1963
Well, there's a lot of different prices. The 4into1 kit is $300. A basic china kit is $54. Any suggestions?

Please Log in or Create an account to join the conversation.

More
30 Sep 2024 12:36 #904749 by zed1015
The 4-1 kit is a real Dyna Ignition but with chinese copy coils and leads.
Most of the cost there is due to the genuine Dyna ignition.

AIR CORRECTOR JETS FOR VM CARBS AND ETHANOL RESISTANT VITON CHOKE PLUNGER SEAL REPLACMENT FOR ALL CLASSIC AND MODERN MOTORCYCLE CARBURETTORS
www.kzrider.com/23-for-sale/611992-air-c...lide-mikunis?start=0





The following user(s) said Thank You: chopper1963

Please Log in or Create an account to join the conversation.

More
30 Sep 2024 12:49 #904750 by Warren3200gt
Your original kawasaki coils will work fine with the copy ignition plate. 
There's plenty of resellers of the Chinese ignition plate which all come from the same Chinese sweatshop. 
Take your pick from whichever has best price/delivery time. 
Just make sure you buy the correct one for your 650 as the one for 900's  is a different diameter backing plate. 


Z1000J2 somewhat modified!

The following user(s) said Thank You: chopper1963

Please Log in or Create an account to join the conversation.

More
01 Oct 2024 05:19 #904770 by chopper1963
The $50 one comes with zero instruction and 4into1 doesn't do any customer support after the sale. I learned this the hard way.

What would a guy do if he opted for $50? What comes off, what goes where?

Please Log in or Create an account to join the conversation.

  • Wookie58
  • Away
  • Moderator
More
01 Oct 2024 05:41 #904771 by Wookie58
As it's a copy of a Dyna the fitting should be similar - There are several videos of "how to" on YouTube and also I have included a Dyna wiring diagram





 
The following user(s) said Thank You: Warren3200gt

Please Log in or Create an account to join the conversation.

More
01 Oct 2024 07:52 #904775 by Warren3200gt
You can download and print the fitting instructions off the Dyna website. 
Fitting the Chinesium one is exactly the same. 
 


Z1000J2 somewhat modified!

The following user(s) said Thank You: Wookie58

Please Log in or Create an account to join the conversation.

More
01 Oct 2024 16:06 #904788 by sf4t7
It would be a good time to add a relay and fuse to the coil power supply wiring while you're installing your ignition.  Plenty of posts here covering the addition.
BTW I installed one of the 45 dollar no-name Dyna copies and so far so good.


Scotty

1974 Z1A
1015
welded Z1 crank
Andrews 1X Cams
Delkevic 4 into 1
Superbike bars
530 conversion
The following user(s) said Thank You: Wookie58

Please Log in or Create an account to join the conversation.

Powered by Kunena Forum

If you like KZR Please consider making a donation. Thank you.

KZRider is free, but not without cost.

Please consider chipping in a few bucks to help cover the cost of running the KZR servers.