Dutch 1977 Z1000 Build

More
02 Aug 2016 10:11 #737096 by Wiers
Replied by Wiers on topic Dutch 1977 Z1000 Build
Wiring loom.






Done :)




Please Log in or Create an account to join the conversation.

More
02 Aug 2016 10:18 #737098 by Wiers
Replied by Wiers on topic Dutch 1977 Z1000 Build
I am not that good in describing technical parts in English because it is not my native language so if I write rubbish please let me know :cheer:
Some other jobs done or almost done:
Bracket for rear light (CBR600R)





Attachments:

Please Log in or Create an account to join the conversation.

More
02 Aug 2016 10:23 #737099 by Wiers
Replied by Wiers on topic Dutch 1977 Z1000 Build
Chain and sprockets:
Good clearance on both sides, need 2 mm of the hub to get better alignment.
Have about 5-6mm between tire and chain so that will be ok.









Please Log in or Create an account to join the conversation.

More
02 Aug 2016 10:33 #737100 by Wiers
Replied by Wiers on topic Dutch 1977 Z1000 Build
Cleaned the carbs:
This is why this forum is gold! found a "poor man's" ultrasonic cleaner from another member :lol:







Before blasting and ultrasonic:







After:









Please Log in or Create an account to join the conversation.

More
02 Aug 2016 10:34 #737101 by StreetfighterKz
Replied by StreetfighterKz on topic Dutch 1977 Z1000 Build

Wiers wrote: Chain and sprockets:
Good clearance on both sides, need 2 mm of the hub to get better alignment.
Have about 5-6mm between tire and chain so that will be ok.


You can flip the rear sprocket around if it's flat on the inside and dished on the outside. It won't gain much but it will be something.

Bike looks a lot like my '78 1000 I've been tinkering on.

Later, Doug

1978 z1000 Streetfighter
1976 z900 Stripfighter (work in progress)
1983 Gpz750 Resto-Mod
1989 Vmax

Please Log in or Create an account to join the conversation.

More
02 Aug 2016 10:36 #737103 by Wiers
Replied by Wiers on topic Dutch 1977 Z1000 Build
Thanks Doug,
Will look into it tonight, maybe saves me some milling.
Eric

Please Log in or Create an account to join the conversation.

  • Street Fighter LTD
  • Offline
  • Moderator
  • TURBO, Its Better to be Blown than Injected
More
02 Aug 2016 13:28 #737124 by Street Fighter LTD
Replied by Street Fighter LTD on topic Dutch 1977 Z1000 Build
Very nice start !!!!!!!!! :laugh:

I will be keeping a eye on this one ;)
Dave B) B) B)


Original owner 78 1000 LTD
Mr Turbo Race Kit, MTC 1075 Turbo pistons by PitStop Performance , Falicon Ultra Lite Super Crank, APE everything. Les Holt @ PDM's Billet Goodies . Frame by Chuck Kurzawa @ Logghe Chassis . Deep sump 5qt oil pan. RIP Bill Hahn

Please Log in or Create an account to join the conversation.

More
02 Aug 2016 13:38 #737125 by Wiers
Replied by Wiers on topic Dutch 1977 Z1000 Build
Thanks Dave.

Could not resist and went to the shed to take a look at my rear sprocket.
And yes if I flip it, it will give me another 1,5 mm.
Maybe that will be enough but than I wil have a not so shiny side visible and looks are important :laugh:

Please Log in or Create an account to join the conversation.

More
02 Aug 2016 13:46 #737126 by 650ed
Replied by 650ed on topic Dutch 1977 Z1000 Build
Could be a job for.......

Attachment MetalPolishxtreem-2-3.jpg not found



:laugh: :laugh: :laugh: Ed

1977 KZ650-C1 Original Owner - Stock (with additional invisible FIAMM horn)
Attachments:

Please Log in or Create an account to join the conversation.

More
02 Aug 2016 13:56 #737129 by Wiers
Replied by Wiers on topic Dutch 1977 Z1000 Build
:laugh: :laugh: :laugh:
Its easier to let a machine shave 2mm of than destroy my elbow on some polish and a cloth :S

Please Log in or Create an account to join the conversation.

More
02 Aug 2016 15:47 #737135 by floivanus
Replied by floivanus on topic Dutch 1977 Z1000 Build

GPzMOD750 wrote: Nice, Should be fun to watch.

BTW the reason the "K" was dropped from the designation in the Euro and some Brit Commonwealth markets was because KZ was one of the abbreviations the Nazis used for concentration camps (German: Konzentrationslager, KZ or KL).


Didn't stop honda from releasing the goldwing 1000 in the UK with the model designation of KZ.

Keep up the good work, looks good

my bikes; 80kz1000(project), 77 gl1000, 74 h2 (project)
Past; 78 kz1000, 83 kz550
Andrew

Please Log in or Create an account to join the conversation.

More
02 Aug 2016 19:30 #737155 by GregZ
Replied by GregZ on topic Dutch 1977 Z1000 Build
Any plans with the old seat ?

Attachments:

Please Log in or Create an account to join the conversation.

Powered by Kunena Forum