Drag bars and clutch cable

More
05 May 2019 14:54 #803371 by Vincent J
Drag bars and clutch cable was created by Vincent J
Hi guys I put a set of drag handle bars on my z1 and I'm having a issue with the clutch cable being too long.. has anyone ran into this before and possible help me find a shorter cable.. thank you Vinnie

Please Log in or Create an account to join the conversation.

More
05 May 2019 18:39 - 06 May 2019 05:51 #803380 by martin_csr
Replied by martin_csr on topic Drag bars and clutch cable
Z1Enterprises may have the measurements of Motion Pro cables. You could disconnect the clutch cable at the lever end to figure out the overage, then mark & measure it. Then find an appropriate cable. With drag bars I'd guess a cable from a GPz model might work. of course Ltd & CSR cables are going to be way too long.


....
1981 KZ650 Competition Sports and Road
Last edit: 06 May 2019 05:51 by martin_csr.
The following user(s) said Thank You: Vincent J

Please Log in or Create an account to join the conversation.

More
05 May 2019 20:14 #803381 by tomsbadkz
Replied by tomsbadkz on topic Drag bars and clutch cable
I did the same thing on my KZ1000. Buy Z1R cables. I did both throttle cables and clutch cable. I think they are about 4" shorter than regular KZ1000 A model bike, not the LTD.
1977 kz1327
Cavanaugh Head 38.6/33
38mm Flatslides
MRE racecut trans
300mm rear tire
Web Cams 435/465

1984 GPZ1100
Cavanaugh Head
1170cc
Web 415 cams
RC Hp Inj.
Bored throttle bodies
The following user(s) said Thank You: Vincent J

Please Log in or Create an account to join the conversation.

Powered by Kunena Forum

Forum Links