clutch lever cable

  • MALCOLMHOULE
  • MALCOLMHOULE's Avatar Topic Author
  • Offline
  • User
  • Posts: 35
  • Thanks: 2

clutch lever cable

27 May 2023 17:37
#885300
the nipple broke off the cable … new cable is in the mail.   

is this a difficult job - replacing the cable? 
 

Please Log in or Create an account to join the conversation.

  • hardrockminer
  • hardrockminer's Avatar
  • Offline
  • Sustaining Member
  • Posts: 3007
  • Thanks: 1106

Re: clutch lever cable

27 May 2023 19:09
#885304
Normally no.  You will need to remove your drive chain case, and likely your left foot peg and shift lever.  
I have several restored bikes along with a 2006 Goldwing with a sidecar. My wife has a 2019 Suzuki DR 650 for on and off road.
The following user(s) said Thank You: MALCOLMHOULE

Please Log in or Create an account to join the conversation.

  • Nessism
  • Nessism's Avatar
  • Away
  • Sustaining Member
  • Posts: 7559
  • Thanks: 2920

Re: clutch lever cable

27 May 2023 21:52
#885311
An impact driver helps remove the engine cover screws 
Ed
Carb O-ring Kits : www.kzrider.com/forum/3-carburetor/61807...-o-ring-kits?start=0

www.kzrider.com/forum/faq-wiki/618026-new-owner-things-to-know

1981 KZ750E2
www.kzrider.com/forum/11-projects/604901...z750e-project-thread
The following user(s) said Thank You: MALCOLMHOULE

Please Log in or Create an account to join the conversation.

  • hardrockminer
  • hardrockminer's Avatar
  • Offline
  • Sustaining Member
  • Posts: 3007
  • Thanks: 1106

Re: clutch lever cable

28 May 2023 04:05
#885314
Nessism wrote:
An impact driver helps remove the engine cover screws
Excellent point!  I was thinking that the cover is fastened with M6 bolts, but some may use M6 screws.  You will need to buy a proper screwdriver called JIS standard.  Otherwise you can easily strip the screws with a Phillips screwdriver.  Vessel makes really nice impact JIS screwdrivers.
I have several restored bikes along with a 2006 Goldwing with a sidecar. My wife has a 2019 Suzuki DR 650 for on and off road.

Please Log in or Create an account to join the conversation.

  • sf4t7
  • sf4t7's Avatar
  • Offline
  • Sustaining Member
  • Posts: 662
  • Thanks: 464

Re: clutch lever cable

28 May 2023 04:54 - 28 May 2023 04:56
#885315
The Vessel screwdrivers are reasonably priced , I found mine on Amazon
And I agree with Nessism, get the impact type

Scotty
Scotty

1974 Z1A
Yoshimura 987 kit
welded Z1 crank
Andrews 1X Cams
Delkevic 4 into 1
Superbike bars
530 conversion
Last edit: 28 May 2023 04:56 by sf4t7.

Please Log in or Create an account to join the conversation.

  • Nessism
  • Nessism's Avatar
  • Away
  • Sustaining Member
  • Posts: 7559
  • Thanks: 2920

Re: clutch lever cable

28 May 2023 07:53
#885324
I love my JIS screwdrivers.  They are a must for sure.  That said, for engine cover bolts, a standard #3 phillips head bit, as supplied in most common Impact Driver kits, work just fine for the engine cover screws.  Don't try #2, that's too small.  
Ed
Carb O-ring Kits : www.kzrider.com/forum/3-carburetor/61807...-o-ring-kits?start=0

www.kzrider.com/forum/faq-wiki/618026-new-owner-things-to-know

1981 KZ750E2
www.kzrider.com/forum/11-projects/604901...z750e-project-thread

Please Log in or Create an account to join the conversation.

Powered by Kunena Forum