Please help identify this item

Wait. You mean the part that is shaped like an ‘H’? Is that not a cylinder cover? This item?

You mean the H-shaped piece?=========================

Wookie58 wrote:

The exhaust in pic2 is from a big twin (possibly Harley) definitely not KZ 

That is a valve/cyl head cover for a KZ, I meant this one

 

Oh. That pic slipped in somehow. Yes, that is leftover Harley gear. Thanks. 

Wookie58 wrote:

That is a valve/cyl head cover for a KZ, I meant this one

 

Hiya
i finally got my hand on what I think is an ignition advancer. Thank you for the tip. How do I decode the info on the advancer?

PoMoFleet wrote:

Hiya
i finally got my hand on what I think is an ignition advancer. Thank you for the tip. How do I decode the info on the advancer?

 

I suggest using a fine wire brush to clean the rust off, followed by a light coat of oil (WD40?) to help preverve it's beauty.

PoMoFleet wrote:

Hiya
i finally got my hand on what I think is an ignition advancer. Thank you for the tip. How do I decode the info on the advancer?

Decode
005 - The last three numbers of the full part number - 21148-005, which was superseded by 21148-010.
It fits 1975 - 1980 Z1, KZ900 and KZ1000.

TEC is the logo of the company that made the part.

T 1 F 4   T= top dead center for cylinders 1 & 4. F = static ignition firing point for 1 & 4.

T 2 F 3 is the same info for cylinders 2 & 3.

Most of this information is in the factory service manual.

Thank you!
Very helpful.