- Posts: 96
- Thank you received: 0
Offset front sprocket for the KZ750
- schmol
- Topic Author
- Offline
- User
Less
More
04 Apr 2007 04:08 #126339
by schmol
Offset front sprocket for the KZ750 was created by schmol
I know this has been brought up before, but has anyone ordered one for a KZ750? If you did, who did you order it from and what is the part number? I'm pretty sure it is the same as the KZ650.
Please Log in or Create an account to join the conversation.
- steell
- Offline
- User
04 Apr 2007 04:33 #126341
by steell
KD9JUR
Replied by steell on topic Offset front sprocket for the KZ750
Pre 81 KZ650 used a 530 sprocket, KZ750 four used a 630 sprocket.
83-85 GPz750 uses a 5mm offset 630 sprocket, so if 5mm is enough offset just get a GPz750 sprocket.
83-85 GPz750 uses a 5mm offset 630 sprocket, so if 5mm is enough offset just get a GPz750 sprocket.
KD9JUR
Please Log in or Create an account to join the conversation.
- schmol
- Topic Author
- Offline
- User
Less
More
- Posts: 96
- Thank you received: 0
05 Apr 2007 15:22 #126797
by schmol
Replied by schmol on topic Offset front sprocket for the KZ750
Actually my bike is '82 GPZ750R1 and yes it did come with a 630 chain, but I swapped it out for a 530. My new rear '03 swingarm conversion and the factory front sprocket is about roughly 3/8" off to being aligned.
So the 5mm is not enough...
So the 5mm is not enough...
Please Log in or Create an account to join the conversation.
- Fossil
- Offline
- User
Less
More
- Posts: 542
- Thank you received: 5
05 Apr 2007 15:47 #126808
by Fossil
Replied by Fossil on topic Offset front sprocket for the KZ750
Here's a link to JT sprockets catalog/chart. By going through the Kawasaki sprockets and comparing the splines to those of your bike, you might find what you need.
Russ here suggested this to me and I was able to find a 24mm offset sprocket for my project and ordered it through a local Kawasaki dealer.
www.jtsprockets.com/58.0.html?sel_day=14...onth=9&sel_year=2005
Russ here suggested this to me and I was able to find a 24mm offset sprocket for my project and ordered it through a local Kawasaki dealer.
www.jtsprockets.com/58.0.html?sel_day=14...onth=9&sel_year=2005
Please Log in or Create an account to join the conversation.