- Posts: 2
- Thank you received: 0
78 kz650 frame help
- cyberbill
- Topic Author
- Offline
- User
Less
More
11 Apr 2007 17:42 #128937
by cyberbill
78 kz650 frame help was created by cyberbill
Okay guys,
it's a _very_ long story, but if anyone has a 78 kz650b2 frame they can take a look at, I need the width of the swingarm bolt bosses welded into the frame.
short version of the story:
I'm putting a 2001 zx6r rear end on my 78kz650 and do not have enough time to finish it before I'll be able to ride it, so it's going to be put off another year. I've already made some mods to my frame and need to make spacers to compensate for that.
If no one can get this, I have a backup plan, but would rather have the actual numbers.
Thanks guys,
-Bill
it's a _very_ long story, but if anyone has a 78 kz650b2 frame they can take a look at, I need the width of the swingarm bolt bosses welded into the frame.
short version of the story:
I'm putting a 2001 zx6r rear end on my 78kz650 and do not have enough time to finish it before I'll be able to ride it, so it's going to be put off another year. I've already made some mods to my frame and need to make spacers to compensate for that.
If no one can get this, I have a backup plan, but would rather have the actual numbers.
Thanks guys,
-Bill
Please Log in or Create an account to join the conversation.
- RetroRiceRocketRider
- Offline
- User
- ...bring in the machine that goes PING!
Less
More
- Posts: 1641
- Thank you received: 29
11 Apr 2007 18:36 #128982
by RetroRiceRocketRider
Replied by RetroRiceRocketRider on topic 78 kz650 frame help
Welcome to KZr bill.
Give me a few minutes, I'll go out to the garage and get you that measurement from my bike.
Give me a few minutes, I'll go out to the garage and get you that measurement from my bike.
Please Log in or Create an account to join the conversation.
- wireman
- Visitor
11 Apr 2007 18:57 #128996
by wireman
Replied by wireman on topic 78 kz650 frame help
im gonna guess right around 9" but ill wait to see what R4 says since he has an actual 650 frame to go by;)
Please Log in or Create an account to join the conversation.
- RetroRiceRocketRider
- Offline
- User
- ...bring in the machine that goes PING!
Less
More
- Posts: 1641
- Thank you received: 29
11 Apr 2007 19:20 #129018
by RetroRiceRocketRider
Replied by RetroRiceRocketRider on topic 78 kz650 frame help
Dang blasted rear-sets are in the way and I can't even squeeze the tape measure around them on either side!
Sorry Bill. :blush: :S
Hopefully someone else who has their swingarm off can get the measurements for you.
Sorry Bill. :blush: :S
Hopefully someone else who has their swingarm off can get the measurements for you.
Please Log in or Create an account to join the conversation.
- Mark Wing
- Offline
- User
Less
More
- Posts: 1697
- Thank you received: 22
11 Apr 2007 19:27 #129021
by Mark Wing
Jesus loves you Everyone else thinks your an ***
77 KZ650 C1 with ZX7 forks, GPZ mono rear, wider 18 police wheels and Yoshimura motor.
Yorba Linda Cal.
Replied by Mark Wing on topic 78 kz650 frame help
I measure just over 9 in. A hair under 9 1/16.
Mark
Mark
Jesus loves you Everyone else thinks your an ***
77 KZ650 C1 with ZX7 forks, GPZ mono rear, wider 18 police wheels and Yoshimura motor.
Yorba Linda Cal.
Please Log in or Create an account to join the conversation.
- Mark Wing
- Offline
- User
Less
More
- Posts: 1697
- Thank you received: 22
11 Apr 2007 19:47 #129034
by Mark Wing
Jesus loves you Everyone else thinks your an ***
77 KZ650 C1 with ZX7 forks, GPZ mono rear, wider 18 police wheels and Yoshimura motor.
Yorba Linda Cal.
Replied by Mark Wing on topic 78 kz650 frame help
Oh yeah welcome to KZR.
Mark
Mark
Jesus loves you Everyone else thinks your an ***
77 KZ650 C1 with ZX7 forks, GPZ mono rear, wider 18 police wheels and Yoshimura motor.
Yorba Linda Cal.
Please Log in or Create an account to join the conversation.
- cyberbill
- Topic Author
- Offline
- User
Less
More
- Posts: 2
- Thank you received: 0
12 Apr 2007 02:59 #129140
by cyberbill
Replied by cyberbill on topic 78 kz650 frame help
Thanks guys for the very quick responses! :woohoo: Though, actually I meant the bosses themselves.
should be in the area of an inch - inch and a half.
Haven't been on the new site, didn't know it got updated. looks like all my info got deleted, have to update it. :huh:
should be in the area of an inch - inch and a half.
Haven't been on the new site, didn't know it got updated. looks like all my info got deleted, have to update it. :huh:
Please Log in or Create an account to join the conversation.