- Posts: 5359
- Thank you received: 109
streetfighter headlight brackets
- mark1122
- Topic Author
- Offline
- User
- Keep twisting it
Less
More
10 Aug 2007 07:17 #163004
by mark1122
76 KZ, frame gusset work,1200CC.Ported by Larry Cavanaugh, 1.5mm.over intakes, Carron Pipe, ZRX12 rear end, and seat,96zx9 front end.
01 CBR600F4i Track bike.
Cobourg, Ont. Can.
~ ~ ~_@
~ ~ _- \,
~ (k) / (z)
streetfighter headlight brackets was created by mark1122
does anyone know where i can get headlight brackets to fit 52mm.forks. iam useing usd forks and need brackets to mount the stock kz hd lt.i know there are some aftermarket 1's out there and would like to hear about them.i would also like to know if there is any from a stock bike that would fit so i can shop around,(ebay or reckers maybe?)
76 KZ, frame gusset work,1200CC.Ported by Larry Cavanaugh, 1.5mm.over intakes, Carron Pipe, ZRX12 rear end, and seat,96zx9 front end.
01 CBR600F4i Track bike.
Cobourg, Ont. Can.
~ ~ ~_@
~ ~ _- \,
~ (k) / (z)
Please Log in or Create an account to join the conversation.
- StreetfighterKz
- Offline
- User
Less
More
- Posts: 1510
- Thank you received: 117
10 Aug 2007 08:38 #163022
by StreetfighterKz
1978 z1000 Streetfighter
1976 z900 Stripfighter (work in progress)
1983 Gpz750 Resto-Mod
1989 Vmax
Replied by StreetfighterKz on topic streetfighter headlight brackets
s7d2.scene7.com/s7ondemand/brochure/flas...hartPhillipseCatalog
Left page, bottom right hand corner
These are the ones I'm using on my 900 but I modded them slightly for what I wanted.
Later, Doug
Left page, bottom right hand corner
These are the ones I'm using on my 900 but I modded them slightly for what I wanted.
Later, Doug
1978 z1000 Streetfighter
1976 z900 Stripfighter (work in progress)
1983 Gpz750 Resto-Mod
1989 Vmax
Please Log in or Create an account to join the conversation.
- elseed
- Offline
- User
Less
More
- Posts: 104
- Thank you received: 0
10 Aug 2007 08:51 #163027
by elseed
'75 Z1B with mods
Replied by elseed on topic streetfighter headlight brackets
Doug -- That link isn't working too good for me.
I went through a struggle with brackets, tried some inexpensive ones to no avail. I found some Euro-streetfighter ones, but they were crazy expensive machined things like this: . ($150 now, I thinkk)
I think searching for some OEM ones from a standard bike with USD forks would be a good idea -- not sure how you tap into 52mm stock offerings, but seems like a good idea to me. Next would be to fab/machine something yourself.
I went through a struggle with brackets, tried some inexpensive ones to no avail. I found some Euro-streetfighter ones, but they were crazy expensive machined things like this: . ($150 now, I thinkk)
I think searching for some OEM ones from a standard bike with USD forks would be a good idea -- not sure how you tap into 52mm stock offerings, but seems like a good idea to me. Next would be to fab/machine something yourself.
'75 Z1B with mods
Please Log in or Create an account to join the conversation.
- StreetfighterKz
- Offline
- User
Less
More
- Posts: 1510
- Thank you received: 117
10 Aug 2007 09:08 #163030
by StreetfighterKz
1978 z1000 Streetfighter
1976 z900 Stripfighter (work in progress)
1983 Gpz750 Resto-Mod
1989 Vmax
Replied by StreetfighterKz on topic streetfighter headlight brackets
elseed wrote:
Hmmm...well here's a screen shot.
Later, Doug
Post edited by: StreetfighterKz, at: 2007/08/10 12:10
That link isn't working too good for me.
Hmmm...well here's a screen shot.
Later, Doug
Post edited by: StreetfighterKz, at: 2007/08/10 12:10
1978 z1000 Streetfighter
1976 z900 Stripfighter (work in progress)
1983 Gpz750 Resto-Mod
1989 Vmax
Attachments:
Please Log in or Create an account to join the conversation.
- mark1122
- Topic Author
- Offline
- User
- Keep twisting it
Less
More
- Posts: 5359
- Thank you received: 109
11 Aug 2007 14:14 #163220
by mark1122
76 KZ, frame gusset work,1200CC.Ported by Larry Cavanaugh, 1.5mm.over intakes, Carron Pipe, ZRX12 rear end, and seat,96zx9 front end.
01 CBR600F4i Track bike.
Cobourg, Ont. Can.
~ ~ ~_@
~ ~ _- \,
~ (k) / (z)
Replied by mark1122 on topic streetfighter headlight brackets
Those would work Doug.thanks.Elseed ,what are u useing on your zx7 forks?.those are what i am useing as well.
76 KZ, frame gusset work,1200CC.Ported by Larry Cavanaugh, 1.5mm.over intakes, Carron Pipe, ZRX12 rear end, and seat,96zx9 front end.
01 CBR600F4i Track bike.
Cobourg, Ont. Can.
~ ~ ~_@
~ ~ _- \,
~ (k) / (z)
Please Log in or Create an account to join the conversation.
- caffcruiser
- Offline
- User
Less
More
- Posts: 377
- Thank you received: 2
11 Aug 2007 15:18 #163236
by caffcruiser
Replied by caffcruiser on topic streetfighter headlight brackets
NM
Post edited by: caffcruiser, at: 2007/08/11 18:18
Post edited by: caffcruiser, at: 2007/08/11 18:18
Please Log in or Create an account to join the conversation.
- mark1122
- Topic Author
- Offline
- User
- Keep twisting it
Less
More
- Posts: 5359
- Thank you received: 109
14 Aug 2007 19:27 #163952
by mark1122
76 KZ, frame gusset work,1200CC.Ported by Larry Cavanaugh, 1.5mm.over intakes, Carron Pipe, ZRX12 rear end, and seat,96zx9 front end.
01 CBR600F4i Track bike.
Cobourg, Ont. Can.
~ ~ ~_@
~ ~ _- \,
~ (k) / (z)
Replied by mark1122 on topic streetfighter headlight brackets
anyone else?:whistle:
76 KZ, frame gusset work,1200CC.Ported by Larry Cavanaugh, 1.5mm.over intakes, Carron Pipe, ZRX12 rear end, and seat,96zx9 front end.
01 CBR600F4i Track bike.
Cobourg, Ont. Can.
~ ~ ~_@
~ ~ _- \,
~ (k) / (z)
Please Log in or Create an account to join the conversation.
- Bad Kaw
- Offline
- User
- Flying Squirell
Less
More
- Posts: 1750
- Thank you received: 13
14 Aug 2007 19:48 #163960
by Bad Kaw
78 Kawasaki Z1R
81 Kawasaki KZ1000J (mods)
82 Kawasaki ELR Clone (1000 J)
82 Kawasaki KZ750R1/GPz750 ELR-ed
70 Kawasaki KV75
83 Honda CB1100F (few mods)
79 Suzuki GS1000 (rolling frame / project / junk)
84 Suzuki GS1150ES (modified project)
83 Yamaha XJ900R (project / junk)
Replied by Bad Kaw on topic streetfighter headlight brackets
I got some from Lockhart/Phillips a few years back and am planning on making them fit...when I find them...the garage has a few issues at the moment, but anyway, the things look very similar to the ones in the pics above. I got them when I was a parts mgr going to grad school. LP imported them as the writings on the package were mostly Japanese. Not too expensive, either. No where near the $150 mark...if I remember it was probably a $40 retail thing with dealer cost being around 25...just guessing after these years (about 3 years back).
After seeing some cool stuff in Streetfighters I was thinking about having a friend use some round stock aluminum tubing and bend and weld a bracket to the triple and then to the light using stock bolt holes, and just getting longer bolts to fit into the new brackets.
After seeing some cool stuff in Streetfighters I was thinking about having a friend use some round stock aluminum tubing and bend and weld a bracket to the triple and then to the light using stock bolt holes, and just getting longer bolts to fit into the new brackets.
78 Kawasaki Z1R
81 Kawasaki KZ1000J (mods)
82 Kawasaki ELR Clone (1000 J)
82 Kawasaki KZ750R1/GPz750 ELR-ed
70 Kawasaki KV75
83 Honda CB1100F (few mods)
79 Suzuki GS1000 (rolling frame / project / junk)
84 Suzuki GS1150ES (modified project)
83 Yamaha XJ900R (project / junk)
Please Log in or Create an account to join the conversation.
- mark1122
- Topic Author
- Offline
- User
- Keep twisting it
Less
More
- Posts: 5359
- Thank you received: 109
16 Aug 2007 15:37 #164299
by mark1122
76 KZ, frame gusset work,1200CC.Ported by Larry Cavanaugh, 1.5mm.over intakes, Carron Pipe, ZRX12 rear end, and seat,96zx9 front end.
01 CBR600F4i Track bike.
Cobourg, Ont. Can.
~ ~ ~_@
~ ~ _- \,
~ (k) / (z)
Replied by mark1122 on topic streetfighter headlight brackets
keep me posted on your progress.maybe we can get something cool going.
76 KZ, frame gusset work,1200CC.Ported by Larry Cavanaugh, 1.5mm.over intakes, Carron Pipe, ZRX12 rear end, and seat,96zx9 front end.
01 CBR600F4i Track bike.
Cobourg, Ont. Can.
~ ~ ~_@
~ ~ _- \,
~ (k) / (z)
Please Log in or Create an account to join the conversation.