- Posts: 27
- Thank you received: 0
95 zx9r fork swap stem ?
- gpznutt
- Topic Author
- Offline
- User
Less
More
19 Jan 2008 23:03 #190172
by gpznutt
95 zx9r fork swap stem ? was created by gpznutt
Just wonderin if anyone knows someone who sells or has the specks to machine a stem for a 1982 gpz750 , zx9 usd fork swap
Please Log in or Create an account to join the conversation.
- StreetfighterKz
- Offline
- User
Less
More
- Posts: 1510
- Thank you received: 117
20 Jan 2008 09:03 #190229
by StreetfighterKz
1978 z1000 Streetfighter
1976 z900 Stripfighter (work in progress)
1983 Gpz750 Resto-Mod
1989 Vmax
Replied by StreetfighterKz on topic 95 zx9r fork swap stem ?
Possible Kosman but that's the only place that might have a clue. Most people doing swaps figure it out as they go by comparing each stem and taking measurements.
Later, Doug
Later, Doug
1978 z1000 Streetfighter
1976 z900 Stripfighter (work in progress)
1983 Gpz750 Resto-Mod
1989 Vmax
Please Log in or Create an account to join the conversation.
- steell
- Offline
- User
20 Jan 2008 13:12 #190253
by steell
KD9JUR
Replied by steell on topic 95 zx9r fork swap stem ?
Simple job for any machine shop, the whole thing can be done on a lathe.
Is the Zx9 stem the same length as the 750? can you just do a bearing swap and use the ZX9 stem? I did a bearing swap to put a 99 GSX750 front end on a KZ750E, had to lengthen the stem though.
Post edited by: steell, at: 2008/01/20 16:17
Is the Zx9 stem the same length as the 750? can you just do a bearing swap and use the ZX9 stem? I did a bearing swap to put a 99 GSX750 front end on a KZ750E, had to lengthen the stem though.
Post edited by: steell, at: 2008/01/20 16:17
KD9JUR
Please Log in or Create an account to join the conversation.
- gpznutt
- Topic Author
- Offline
- User
Less
More
- Posts: 27
- Thank you received: 0
20 Jan 2008 19:20 #190295
by gpznutt
Replied by gpznutt on topic 95 zx9r fork swap stem ?
the stems are far apart in dimensions its just that i work 24/7 lookin for a simpler way but will have my bro send it too Raceworks , Mike does exelent work.
thanks guys
thanks guys
Please Log in or Create an account to join the conversation.