- Posts: 1490
- Thank you received: 385
ELR seatcover
- ThatGPzGuy
- Topic Author
- Offline
- Sustaining Member
- More Sparky than Speed Racer
I am getting rid of the non-stock seatcover on my ELR clone. I bought an ELR seatcover on eBay and would like to recover the seat myself. Upholstery experience? Some. I recovered my Bronco seats and am in the middle of recovering my Mustang seats. I have also done a couple of dirt bike seats. However these were all stock covers...
from looking at the seat and the pictures of what I want to eventually end up with it looks like I need to reshape the foam. Those of you who have done this...what do I need to know? Or, should I bite the bullet and take it to someone?
TIA,
Jim
Jim
North GA
2016 Yamaha FJR1300ES
1982 GPz750 R1
1974 Kawasaki H1
1976 Kawasaki KZ400
1979 Yamaha XS650 cafe'
2001 KZ1000P
2001 Yamaha YZ426
1981 Honda XR200 stroked in an '89 CR125 chassis
1965 Mustang
1967 Triumph GT6
1976 Bronco
"If you didn't build it, it's not really yours"
Please Log in or Create an account to join the conversation.
- Mcdroid
- Offline
- User
- Gone Kwackers
- Posts: 6640
- Thank you received: 318
actually did what you are considering, so you might want to PM him directly. FYI, the seat pan for a J/R/B model does not fit correctly on the KZ750R1 frame...however, I have seen a few KZ750R1's with ELR seats so it is possible.
Michael
Victoria, Texas
1982 GPz750
1977 KZ1000A
1978 KZ1000A
1982 GPz1100
1975 Z2A
Please Log in or Create an account to join the conversation.
- ThatGPzGuy
- Topic Author
- Offline
- Sustaining Member
- More Sparky than Speed Racer
- Posts: 1490
- Thank you received: 385
I am trying to do Exactly what GPZ750KS did. In fact, he is the one who gave me the idea. I am hoping he chimes in but if not I will PM him.
Are you saying the ELR seatpan is larger than the GPz seat pan? I guess that would be better than teh alternative. I laid the cover on the seat and it looks pretty close. I have not taken off the old seatcover yet but I cannot wait as it is non-stock and looks awful.
I had thought I might have to cut foam "by-the-seat-of-my-pants" (no pun intended) to get this cover to work but if someone who has done it successfully can guide me...all the better.
Thanks,
Jim
Jim
North GA
2016 Yamaha FJR1300ES
1982 GPz750 R1
1974 Kawasaki H1
1976 Kawasaki KZ400
1979 Yamaha XS650 cafe'
2001 KZ1000P
2001 Yamaha YZ426
1981 Honda XR200 stroked in an '89 CR125 chassis
1965 Mustang
1967 Triumph GT6
1976 Bronco
"If you didn't build it, it's not really yours"
Please Log in or Create an account to join the conversation.
- Mcdroid
- Offline
- User
- Gone Kwackers
- Posts: 6640
- Thank you received: 318
Are you saying the ELR seatpan is larger than the GPz seat pan? I guess that would be better than teh alternative. I laid the cover on the seat and it looks pretty close. I have not taken off the old seatcover yet but I cannot wait as it is non-stock and looks awful.
The ELR seatpan (KZ1000R1/2, KZ1100R1) is the same pan as the KZ1100B1/2 (=GPz1100) and the KZ1000J1/2/3...the GPz750 seatpan (yours) is smaller than those mentioned. Richard (GPz750KS) travels frequently so he doesn't always answer PM's or emails immediately.
Michael
Victoria, Texas
1982 GPz750
1977 KZ1000A
1978 KZ1000A
1982 GPz1100
1975 Z2A
Please Log in or Create an account to join the conversation.
- Bad Dad
- Offline
- User
- Posts: 195
- Thank you received: 0
Hi McDroid,
I am trying to do Exactly what GPZ750KS did. In fact, he is the one who gave me the idea. I am hoping he chimes in but if not I will PM him.
Are you saying the ELR seatpan is larger than the GPz seat pan? I guess that would be better than teh alternative. I laid the cover on the seat and it looks pretty close. I have not taken off the old seatcover yet but I cannot wait as it is non-stock and looks awful.
I had thought I might have to cut foam "by-the-seat-of-my-pants" (no pun intended) to get this cover to work but if someone who has done it successfully can guide me...all the better.
Thanks,
Jim
Hey, I'm hoping that you (or anybody else) can help me with this Mod, as it seems that you were into it about two years ago. I want to Mod my seat, and like the ELR seat look - what did you have to do to make it work?
Thanks in advance,
Tony
76 KZ900LTD
82 GPz750R1
01 VULCAN 800A-CHOPPED
76 IRONHEAD-CHOPPED
77 RD 400 Cafe
Please Log in or Create an account to join the conversation.