- Posts: 157
- Thank you received: 0
'80 KZ1000B4 fork oil
- sbulla
- Topic Author
- Offline
- User
- 1980 KZ1000 LTD
The manual calls for 180-188cc of SAE 10W20 oil. Are they talking motor oil or does fork oil come in multi-viscosity? In the past I've only used single weight oils in forks.
Any recommendations for a good oil to handle my 220lb's and heavy front brake usage?
Sonny
Now----
1980 KZ1000 LTD (Kerker 4-1, K&N pods, Dyna gray coils)
Gone but not forgotten----
1966 Honda 305 Superhawk
1969 HD 350 Sprint
1971 500 H1
1972 250 F8
1972 750 H2
1973 KX250
1995 HD Sportster 1200
2000 HD Softail
2002 KLR650
Please Log in or Create an account to join the conversation.
- MFolks
- Offline
- User
- Posts: 6650
- Thank you received: 540
My understanding of the oil required is that it is made just for fork applications as the engine oil may not go through the oil control orfices as well as a thin oil will.
As for a good oil choice ask at the bike shops or try the internet for oils.
1982 GPZ1100 B2
General Dynamics/Convair 1983-1993
GLCM BGM-109 Tomahawk, AGM-129A Advanced Cruise Missile (ACM)
Please Log in or Create an account to join the conversation.
- sbulla
- Topic Author
- Offline
- User
- 1980 KZ1000 LTD
- Posts: 157
- Thank you received: 0
My understanding of the oil required is that it is made just for fork applications as the engine oil may not go through the oil control orfices as well as a thin oil will.
As for a good oil choice ask at the bike shops or try the internet for oils.
That was my understanding also but, the manual didn't make it clear and, when they recommend multi-viscosity, I just don't ever remember seeing that in fork oil.
As for what oil to use, I was hoping someone on here might have first hand experience as to what weight worked best for my weight and riding style. Otherwise, I'll experiment.
Sonny
Now----
1980 KZ1000 LTD (Kerker 4-1, K&N pods, Dyna gray coils)
Gone but not forgotten----
1966 Honda 305 Superhawk
1969 HD 350 Sprint
1971 500 H1
1972 250 F8
1972 750 H2
1973 KX250
1995 HD Sportster 1200
2000 HD Softail
2002 KLR650
Please Log in or Create an account to join the conversation.
- Patton
- Offline
- KZr Legend
- Posts: 18640
- Thank you received: 2098
I have some new seals I need to install in my forks so, I thought I'd pull them apart and check them over and clean. The manual calls for 180-188cc of SAE 10W20 oil. Are they talking motor oil or does fork oil come in multi-viscosity? In the past I've only used single weight oils in forks. Any recommendations for a good oil to handle my 220lb's and heavy front brake usage?
Sonny
For comparison, FSM for 1977,1978, and 1979 KZ1000 specifies common motor oil SAE 10W for 1977 and 1978, and SAE 10W20 for 1979.
Most bike shops carry various brands of fork oil specifically blended (touted?) for forks. Bel-Ray comes to mind. Many owners use motor oil, others prefer using ATF, and some use fork oil.
Thinking the important thing is to not allow the existing oil to becomed rancid or depleted.
Am guessing the 10W20 would be just fine for 220 lbs and heavy front brake usage, but perhaps not any lesser viscosity. Would use whatever results in performance most preferred, from a softer cushier bump-absorbing "touring" ride to a stiffer more controlled ride usually preferred for higher performance cornering, etc.
On a side note, watch for any front end "wallowing" which might be more prevalent with the lighter weight fork oils, especially during long fast sweepers (and even more-so with a passenger or heavily loaded bike.)
Good Luck!
1973 Z1
KZ900 LTD
Please Log in or Create an account to join the conversation.
- sbulla
- Topic Author
- Offline
- User
- 1980 KZ1000 LTD
- Posts: 157
- Thank you received: 0
n a side note, watch for any front end "wallowing" which might be more prevalent with the lighter weight fork oils, especially during long fast sweepers (and even more-so with a passenger or heavily loaded bike.)
Good Luck!
I'm getting a bunch of that wallowing you mentioned right now! I think I'm low on fluid as the seals are leaking and the forks are greasy.
Since I just purchased this bike and don't know the maintenance history, I'm going to tear 'em apart and clean them up pronto! I found almost a full quart of Bel-Ray 15w back on the shelf that I used on my other bike (KLR650) so, I think I'll give it a try. It works good on it. Finding 10w20 might prove to be difficult as I usually only see 10w30 or higher in the auto parts stores.
Thanks for the reply,
Sonny
Now----
1980 KZ1000 LTD (Kerker 4-1, K&N pods, Dyna gray coils)
Gone but not forgotten----
1966 Honda 305 Superhawk
1969 HD 350 Sprint
1971 500 H1
1972 250 F8
1972 750 H2
1973 KX250
1995 HD Sportster 1200
2000 HD Softail
2002 KLR650
Please Log in or Create an account to join the conversation.
- jon0108
- Offline
- User
- Posts: 75
- Thank you received: 0
Please Log in or Create an account to join the conversation.
- PLUMMEN
- Offline
- User
- Posts: 8139
- Thank you received: 104
Still recovering,some days are better than others.
Please Log in or Create an account to join the conversation.