- Posts: 67
- Thank you received: 0
Removing front brake switch
- ggenovez
- Topic Author
- Offline
- User
Less
More
28 Sep 2008 17:36 #239112
by ggenovez
KZ-1100 A1
Removing front brake switch was created by ggenovez
Hi all,
I have a 81 kz1100a1 and the front master brake is leaking.
How do you remove the electrical switch? I figured since I'm rebuilding the cylinder, I might as well paint it.
I have a 81 kz1100a1 and the front master brake is leaking.
How do you remove the electrical switch? I figured since I'm rebuilding the cylinder, I might as well paint it.
KZ-1100 A1
Please Log in or Create an account to join the conversation.
- Sandy
- Offline
- User
- Fly High,Tony
Less
More
- Posts: 2452
- Thank you received: 13
28 Sep 2008 20:32 #239145
by Sandy
1977 KZ1000 A-1
Replied by Sandy on topic Removing front brake switch
Isn't it just a small screw that hold the micro-switch in place?:huh:
1977 KZ1000 A-1
Please Log in or Create an account to join the conversation.
- ggenovez
- Topic Author
- Offline
- User
Less
More
- Posts: 67
- Thank you received: 0
28 Sep 2008 20:42 #239148
by ggenovez
KZ-1100 A1
Replied by ggenovez on topic Removing front brake switch
There was a small clip that holds the outside of the rubber cover, but I did not see the screw.
Where is that located?
Where is that located?
KZ-1100 A1
Please Log in or Create an account to join the conversation.
- Sandy
- Offline
- User
- Fly High,Tony
Less
More
- Posts: 2452
- Thank you received: 13
28 Sep 2008 20:55 #239153
by Sandy
1977 KZ1000 A-1
Replied by Sandy on topic Removing front brake switch
Is there not a very small screw on the switch?
I'm not familiar with that set-up,but most of those switches ARE just held in place with a screw...look close.:huh:
I'm not familiar with that set-up,but most of those switches ARE just held in place with a screw...look close.:huh:
1977 KZ1000 A-1
Please Log in or Create an account to join the conversation.
- ggenovez
- Topic Author
- Offline
- User
Less
More
- Posts: 67
- Thank you received: 0
28 Sep 2008 21:05 #239154
by ggenovez
KZ-1100 A1
Replied by ggenovez on topic Removing front brake switch
Sorry I don't see the screw.
It actually looks like it's pressed in and the lever keeps it in place. The clip holds the rubber boot.
According to the book I'm supposed to "push up on the front brake light switch locking tab and pull the switch free from the lever bracket"
It actually looks like it's pressed in and the lever keeps it in place. The clip holds the rubber boot.
According to the book I'm supposed to "push up on the front brake light switch locking tab and pull the switch free from the lever bracket"
KZ-1100 A1
Please Log in or Create an account to join the conversation.
- MFolks
- Offline
- User
Less
More
- Posts: 6650
- Thank you received: 540
28 Sep 2008 21:31 #239155
by MFolks
1982 GPZ1100 B2
General Dynamics/Convair 1983-1993
GLCM BGM-109 Tomahawk, AGM-129A Advanced Cruise Missile (ACM)
Replied by MFolks on topic Removing front brake switch
If you remove the brake lever there is a plastic piece you rotate and the piston should be able to be removed. I suspect the seals are worn and pressure can't be maintained.
www.z1enterprises.co should have front master cylinder rebuild kits or know where to get them.
www.z1enterprises.co should have front master cylinder rebuild kits or know where to get them.
1982 GPZ1100 B2
General Dynamics/Convair 1983-1993
GLCM BGM-109 Tomahawk, AGM-129A Advanced Cruise Missile (ACM)
Please Log in or Create an account to join the conversation.
- ggenovez
- Topic Author
- Offline
- User
Less
More
- Posts: 67
- Thank you received: 0
28 Sep 2008 21:46 #239157
by ggenovez
KZ-1100 A1
Replied by ggenovez on topic Removing front brake switch
Thx Mfolks.
I have the piston out already.
My problem is getting the switch that activates when you pull on the lever out.
I have the piston out already.
My problem is getting the switch that activates when you pull on the lever out.
KZ-1100 A1
Please Log in or Create an account to join the conversation.
- ggenovez
- Topic Author
- Offline
- User
Less
More
- Posts: 67
- Thank you received: 0
29 Sep 2008 11:42 - 29 Sep 2008 11:43 #239235
by ggenovez
KZ-1100 A1
Replied by ggenovez on topic Removing front brake switch
Perhaps a picture is better than my description...
webservices.motorsportdealers.com/parts/...S/3/07/0065/E-14.Gif
Item 27010
webservices.motorsportdealers.com/parts/...S/3/07/0065/E-14.Gif
Item 27010
KZ-1100 A1
Last edit: 29 Sep 2008 11:43 by ggenovez.
Please Log in or Create an account to join the conversation.
- ronjones
- Offline
- User
Less
More
- Posts: 565
- Thank you received: 4
29 Sep 2008 13:06 #239244
by ronjones
'82 KZ750 CSR, M1 twin. Mac 2-1 exhaust, K&N pods, 17tooth drive sprocket, Mikuni BS-34 carbs w/#47.5 pilot jet and #125 main jet, Canadian XS650 needlejetjet needle, Wired George's coil mod.
Barrak, Nancy and Harry says: Welcome to the United Soviet States of America, Comrades
Replied by ronjones on topic Removing front brake switch
I think I know what's going on. On mine the brake switch is "pressed" in using 2 plastic tines on the switch that engages 2 square holes on the housing. You might need to clean it up a bit, to find it, but just use a small screwdriver or something similar to push the tine out of the hole and the switch should just pull out. You may have to push both tines, but I've never had to do that.
'82 KZ750 CSR, M1 twin. Mac 2-1 exhaust, K&N pods, 17tooth drive sprocket, Mikuni BS-34 carbs w/#47.5 pilot jet and #125 main jet, Canadian XS650 needlejetjet needle, Wired George's coil mod.
Barrak, Nancy and Harry says: Welcome to the United Soviet States of America, Comrades
Please Log in or Create an account to join the conversation.
- ggenovez
- Topic Author
- Offline
- User
Less
More
- Posts: 67
- Thank you received: 0
29 Sep 2008 13:18 #239248
by ggenovez
KZ-1100 A1
Replied by ggenovez on topic Removing front brake switch
Thanks Ron,
It sounds like it's similar to the setup for the master cylinder plunger.
I'll have a look at it tonight.
It sounds like it's similar to the setup for the master cylinder plunger.
I'll have a look at it tonight.
KZ-1100 A1
Please Log in or Create an account to join the conversation.
- ggenovez
- Topic Author
- Offline
- User
Less
More
- Posts: 67
- Thank you received: 0
29 Sep 2008 18:19 #239304
by ggenovez
KZ-1100 A1
Replied by ggenovez on topic Removing front brake switch
Hey Ron,
just wanted to say thanks. That was it.
The microswitch has a tab that you push in and it pulls out.
Thanks again.
G
just wanted to say thanks. That was it.
The microswitch has a tab that you push in and it pulls out.
Thanks again.
G
KZ-1100 A1
Please Log in or Create an account to join the conversation.
- ronjones
- Offline
- User
Less
More
- Posts: 565
- Thank you received: 4
29 Sep 2008 18:55 #239317
by ronjones
'82 KZ750 CSR, M1 twin. Mac 2-1 exhaust, K&N pods, 17tooth drive sprocket, Mikuni BS-34 carbs w/#47.5 pilot jet and #125 main jet, Canadian XS650 needlejetjet needle, Wired George's coil mod.
Barrak, Nancy and Harry says: Welcome to the United Soviet States of America, Comrades
Replied by ronjones on topic Removing front brake switch
glad I could help;)
'82 KZ750 CSR, M1 twin. Mac 2-1 exhaust, K&N pods, 17tooth drive sprocket, Mikuni BS-34 carbs w/#47.5 pilot jet and #125 main jet, Canadian XS650 needlejetjet needle, Wired George's coil mod.
Barrak, Nancy and Harry says: Welcome to the United Soviet States of America, Comrades
Please Log in or Create an account to join the conversation.