- Posts: 554
- Thank you received: 6
Swingarm ?
- badrhino
- Topic Author
- Offline
- User
Less
More
04 Jan 2009 19:16 #256201
by badrhino
1980 KZ1000 with a 1982 KZ1000J motor with 1100 pistons and heads, Vance & Hines, 29MM Smooth Bores, Work in Progress
Franken Z!
Swingarm ? was created by badrhino
Will the older ZX-6 swingarms fit the KZ1000 without too much hassle?
I have one fron the early 90's and one from the later 90's early 2000's.
I have one fron the early 90's and one from the later 90's early 2000's.
1980 KZ1000 with a 1982 KZ1000J motor with 1100 pistons and heads, Vance & Hines, 29MM Smooth Bores, Work in Progress
Franken Z!
Please Log in or Create an account to join the conversation.
- donthekawguy
- Offline
- User
Less
More
- Posts: 1913
- Thank you received: 8
04 Jan 2009 23:32 #256227
by donthekawguy
Rathdrum Idaho
1971 Kawasaki g3ss
1972 Yamaha R5 350
1965 Suzuki Hillbilly
1964 Yamaha 125
Replied by donthekawguy on topic Swingarm ?
If it's wider at the pivot just grind it or have it machined down. If it's not wide enough you can use washers as spacers. You will either need to buy shock mounts from Jeff or convert it to mono shock. But it will work.
Rathdrum Idaho
1971 Kawasaki g3ss
1972 Yamaha R5 350
1965 Suzuki Hillbilly
1964 Yamaha 125
Please Log in or Create an account to join the conversation.
- StreetfighterKz
- Offline
- User
Less
More
- Posts: 1510
- Thank you received: 117
05 Jan 2009 06:25 #256238
by StreetfighterKz
1978 z1000 Streetfighter
1976 z900 Stripfighter (work in progress)
1983 Gpz750 Resto-Mod
1989 Vmax
Replied by StreetfighterKz on topic Swingarm ?
I think that the ZX6D/E models fit without too much hassle but F,J, and newer arms might be too wide to fit without machining.
Later, Doug
Later, Doug
1978 z1000 Streetfighter
1976 z900 Stripfighter (work in progress)
1983 Gpz750 Resto-Mod
1989 Vmax
Please Log in or Create an account to join the conversation.
- badrhino
- Topic Author
- Offline
- User
Less
More
- Posts: 554
- Thank you received: 6
05 Jan 2009 17:11 #256332
by badrhino
1980 KZ1000 with a 1982 KZ1000J motor with 1100 pistons and heads, Vance & Hines, 29MM Smooth Bores, Work in Progress
Franken Z!
Replied by badrhino on topic Swingarm ?
donthekawguy, nice avatar!
Thanks guys!
Thanks guys!
1980 KZ1000 with a 1982 KZ1000J motor with 1100 pistons and heads, Vance & Hines, 29MM Smooth Bores, Work in Progress
Franken Z!
Please Log in or Create an account to join the conversation.