- Posts: 406
- Thank you received: 14
Concours rear wheel on 1980 Kz1000
- dejavoodo41
- Topic Author
- Offline
- User
Less
More
26 Mar 2009 11:04 #275526
by dejavoodo41
1977 KZ1000A With 1980 KZ1000A MKII engine, Wiseco 1105 kit, Dyna S Ignition, 3 Ohm Dyna Coils, Cams, Mikuni RS34 Carbs, Vance and Hines Pro Pipe with Comp Baffle
New Smyrna Beach, FL
Concours rear wheel on 1980 Kz1000 was created by dejavoodo41
I recently purchased a 1980 Kz1000 and the previous owner has adapted a concours rear wheel to chain drive. I need to replace the bearing on the drive hub but have no idea what it is off of. It is running a 630 chain with a 38 tooth sprocket. If anyone has a clue as to what this setup may be the info would be greatly appreciated.
1977 KZ1000A With 1980 KZ1000A MKII engine, Wiseco 1105 kit, Dyna S Ignition, 3 Ohm Dyna Coils, Cams, Mikuni RS34 Carbs, Vance and Hines Pro Pipe with Comp Baffle
New Smyrna Beach, FL
Please Log in or Create an account to join the conversation.
- Mcdroid
- Offline
- User
- Gone Kwackers
Less
More
- Posts: 6638
- Thank you received: 318
26 Mar 2009 12:01 #275546
by Mcdroid
Michael
Victoria, Texas
1982 GPz750
1977 KZ1000A
1978 KZ1000A
1982 GPz1100
1975 Z2A
Replied by Mcdroid on topic Concours rear wheel on 1980 Kz1000
You may have stumped us...a picture might aid greatly, but you might have to knock the bearing out to see what it is:(
Michael
Victoria, Texas
1982 GPz750
1977 KZ1000A
1978 KZ1000A
1982 GPz1100
1975 Z2A
Please Log in or Create an account to join the conversation.
- timebomb33
- Offline
- User
Less
More
- Posts: 4288
- Thank you received: 10
26 Mar 2009 12:25 #275550
by timebomb33
1973 z1 2-1974z1-a,2-1975z1-b dragbikes1015cc+1393cc, 1977kz1000,1978kz1000,1981kz1000j, 1997 zx-11, 2000 z12r,1428turbo nitrous pro-mod and a shit load of parts thats all for now leader sask.,CANADA
I THINK MY POWERBAND BROKE
Replied by timebomb33 on topic Concours rear wheel on 1980 Kz1000
the bearing type and number will be on the seal in the bearing look for a 4 digit number like 6205 something like that. the seal will have the measurements on it as well
1973 z1 2-1974z1-a,2-1975z1-b dragbikes1015cc+1393cc, 1977kz1000,1978kz1000,1981kz1000j, 1997 zx-11, 2000 z12r,1428turbo nitrous pro-mod and a shit load of parts thats all for now leader sask.,CANADA
I THINK MY POWERBAND BROKE
Please Log in or Create an account to join the conversation.
- dejavoodo41
- Topic Author
- Offline
- User
Less
More
- Posts: 406
- Thank you received: 14
26 Mar 2009 17:28 #275624
by dejavoodo41
1977 KZ1000A With 1980 KZ1000A MKII engine, Wiseco 1105 kit, Dyna S Ignition, 3 Ohm Dyna Coils, Cams, Mikuni RS34 Carbs, Vance and Hines Pro Pipe with Comp Baffle
New Smyrna Beach, FL
Replied by dejavoodo41 on topic Concours rear wheel on 1980 Kz1000
Thanks for the replies. I ended up just taking it to the dealer. They had no clue either but were able to match the bearing and get it repaired.
1977 KZ1000A With 1980 KZ1000A MKII engine, Wiseco 1105 kit, Dyna S Ignition, 3 Ohm Dyna Coils, Cams, Mikuni RS34 Carbs, Vance and Hines Pro Pipe with Comp Baffle
New Smyrna Beach, FL
Please Log in or Create an account to join the conversation.