swingarm kz &cbr f3?

More
06 Mar 2006 18:06 #28823 by kz-mtd
swingarm kz &cbr f3? was created by kz-mtd
I have a 5 inch cbr/f3 rim. Has anyone tried a cbr f3 swingarm?

Please Log in or Create an account to join the conversation.

More
06 Mar 2006 20:52 #28923 by 77KZ650
Replied by 77KZ650 on topic swingarm kz &cbr f3?
Anything can work, I have an ZX swingarm on my KZ. How wide is the f3 swingarm at the pivot?
Scott
07 MDP Rookie of the Year
01 ZX-12R street/drag bike. 8.97 @155.7 pump gas, dot tires, no bars, no power adders. top speed in the 1/4: 161MPH

Please Log in or Create an account to join the conversation.

More
07 Mar 2006 18:06 #29184 by kz-mtd
Replied by kz-mtd on topic swingarm kz &cbr f3?
Some say 9.5 inch.

Please Log in or Create an account to join the conversation.

More
07 Mar 2006 18:39 #29196 by 77KZ650
Replied by 77KZ650 on topic swingarm kz &cbr f3?
It should be 9 to fit right in, but you can narrow it(I did that to the ZX arm on my bike by about 1/4 inch) or you can grind the frame wider, or a combination, just go slow and make sure everything is straight;) check out my "ZX swingarm and shock" thread, it has pics of the mono shock setup
Scott
07 MDP Rookie of the Year
01 ZX-12R street/drag bike. 8.97 @155.7 pump gas, dot tires, no bars, no power adders. top speed in the 1/4: 161MPH

Please Log in or Create an account to join the conversation.

More
09 Mar 2006 17:00 #29695 by gpzrox
Replied by gpzrox on topic swingarm kz &cbr f3?
GPZ guys use the GSXR swings: just measured one at 9".

Dude was REALLY concerned about me approaching his ride with a tape measure...
84 GPZ750. Modded with stock Kawasaki parts: ZR-7 shock, ZX-6 coils, GPZ1100 throttle, EN454 brake, GPZ900 fuse box, etc. and non stock: Ken Sears mirrors, K&N filter, Pirelli Sport Demons.

Please Log in or Create an account to join the conversation.

Powered by Kunena Forum

Forum Links