- Posts: 344
- Thank you received: 0
Picking up a complete 1994zx600 front end CHEAP.
- kzmarvo
- Topic Author
- Offline
- User
Less
More
15 Jun 2009 17:00 #299443
by kzmarvo
Watch it folks,i have sticky fingers when it comes to a nice looking set of handle bars:)
Picking up a complete 1994zx600 front end CHEAP. was created by kzmarvo
Gonna swap the whole front of my bike to a zx600, it is off a 1994. What all is involved? I am getting the master cylinder for the zx as well.
Watch it folks,i have sticky fingers when it comes to a nice looking set of handle bars:)
Please Log in or Create an account to join the conversation.
- Mark Wing
- Offline
- User
Less
More
- Posts: 1697
- Thank you received: 22
15 Jun 2009 17:54 #299454
by Mark Wing
Jesus loves you Everyone else thinks your an ***
77 KZ650 C1 with ZX7 forks, GPZ mono rear, wider 18 police wheels and Yoshimura motor.
Yorba Linda Cal.
Replied by Mark Wing on topic Picking up a complete 1994zx600 front end CHEAP.
Hard to say. What kind of bike are you planning to put the front end on.
Mark
Mark
Jesus loves you Everyone else thinks your an ***
77 KZ650 C1 with ZX7 forks, GPZ mono rear, wider 18 police wheels and Yoshimura motor.
Yorba Linda Cal.
Please Log in or Create an account to join the conversation.
- kzmarvo
- Topic Author
- Offline
- User
Less
More
- Posts: 344
- Thank you received: 0
15 Jun 2009 18:03 - 15 Jun 2009 18:03 #299462
by kzmarvo
Watch it folks,i have sticky fingers when it comes to a nice looking set of handle bars:)
Replied by kzmarvo on topic Picking up a complete 1994zx600 front end CHEAP.
74 900
Watch it folks,i have sticky fingers when it comes to a nice looking set of handle bars:)
Last edit: 15 Jun 2009 18:03 by kzmarvo.
Please Log in or Create an account to join the conversation.
- Bdog
- Offline
- User
- Sweep the leg johnny!!!
Less
More
- Posts: 181
- Thank you received: 9
15 Jun 2009 18:58 #299481
by Bdog
kzrider.com/forum/11-projects/338400-a-little-bit-of-an-upgrade
'77 KZ650-C1 -- build
810 kit
GPZ cams and carbs
ZX6R front end
GSXR600 Rear
Kerker
Dyna
Accel
ContiMotion tires (120/60-17&170/60-17)
Replied by Bdog on topic Picking up a complete 1994zx600 front end CHEAP.
I believe the 94 should swap over directly, bearing and all. I had a early 90s 600c model and it would slide right in. I also had a 95-97 600r that was a little different and needed to have the stems swapped in the lower triple to work. Have fun shouldn't be too difficult.
kzrider.com/forum/11-projects/338400-a-little-bit-of-an-upgrade
'77 KZ650-C1 -- build
810 kit
GPZ cams and carbs
ZX6R front end
GSXR600 Rear
Kerker
Dyna
Accel
ContiMotion tires (120/60-17&170/60-17)
Please Log in or Create an account to join the conversation.
- kzmarvo
- Topic Author
- Offline
- User
Less
More
- Posts: 344
- Thank you received: 0
15 Jun 2009 19:04 #299483
by kzmarvo
Watch it folks,i have sticky fingers when it comes to a nice looking set of handle bars:)
Replied by kzmarvo on topic Picking up a complete 1994zx600 front end CHEAP.
man thats great,thanks....:woohoo:
Watch it folks,i have sticky fingers when it comes to a nice looking set of handle bars:)
Please Log in or Create an account to join the conversation.
- Old Man Rock
- Offline
- User
Less
More
- Posts: 6224
- Thank you received: 225
15 Jun 2009 19:37 #299490
by Old Man Rock
1976 KZ900-A4
MTC 1075cc.
Camshafts: Kawi GPZ-1100 .375 lift
Head: P&P via Larry Cavanaugh
ZX636 suspension
MIKUNI, RS-34'S...
Kerker 4-1, 1.5" comp baffle.
Dyna-S E.I.
Earls 10 row Oil Cooler
Acewell 2802 Series Speedo/Tach
Innovate LC1 Wideband 02 AFR meter
Phoenix, Az
Replied by Old Man Rock on topic Picking up a complete 1994zx600 front end CHEAP.
Everything you need for this front end on a 1976kz900-Aw which is basically identical to yours...
kzrider.com/index.php?option=com_docman&...d&gid=431&Itemid=108
OMR
kzrider.com/index.php?option=com_docman&...d&gid=431&Itemid=108
OMR
1976 KZ900-A4
MTC 1075cc.
Camshafts: Kawi GPZ-1100 .375 lift
Head: P&P via Larry Cavanaugh
ZX636 suspension
MIKUNI, RS-34'S...
Kerker 4-1, 1.5" comp baffle.
Dyna-S E.I.
Earls 10 row Oil Cooler
Acewell 2802 Series Speedo/Tach
Innovate LC1 Wideband 02 AFR meter
Phoenix, Az
Please Log in or Create an account to join the conversation.
- kzmarvo
- Topic Author
- Offline
- User
Less
More
- Posts: 344
- Thank you received: 0
15 Jun 2009 21:30 #299520
by kzmarvo
Watch it folks,i have sticky fingers when it comes to a nice looking set of handle bars:)
Replied by kzmarvo on topic Picking up a complete 1994zx600 front end CHEAP.
Thanks,looks to be pretty straight forward,the front end is from a 1994zx6r.
Watch it folks,i have sticky fingers when it comes to a nice looking set of handle bars:)
Please Log in or Create an account to join the conversation.