- Posts: 762
- Thank you received: 5
78 KZ750 w/ 03 Gsx-r Swingarm, Monoshock mounting questions (Pics)
- Shoe48
- Offline
- User
- Live each day as it is your last
Less
More
19 Apr 2007 21:58 #132099
by Shoe48
Replied by Shoe48 on topic 78 KZ750 w/ 03 Gsx-r Swingarm, Monoshock mounting questions (Pics)
It might go different for you but I have had to cut the front off the tail plastic as it is to long now , The angle is steeper where it comes together with the seat parts .. I only took out about 4 inches though
Please Log in or Create an account to join the conversation.
- rattler
- Offline
- User
Less
More
- Posts: 180
- Thank you received: 2
20 Apr 2007 23:34 #132470
by rattler
Replied by rattler on topic 78 KZ750 w/ 03 Gsx-r Swingarm, Monoshock mounting questions (Pics)
like what i see so far.....keep us posted and snap somepics of the progress as you go along.
Please Log in or Create an account to join the conversation.
- Jornum1
- Topic Author
- Offline
- User
Less
More
- Posts: 71
- Thank you received: 0
21 Apr 2007 13:15 #132581
by Jornum1
Replied by Jornum1 on topic 78 KZ750 w/ 03 Gsx-r Swingarm, Monoshock mounting questions (Pics)
Thanks Guys,
I chopped the tail, sluged it, and welded it back up.
Here is how we are looking. Everything is still rough, and needs a lot more work. But I am getting there.
next is the seat pan. I am still undecided about that. I cut the stock one, but I feel like its still too wide. I would really like it to hug the frame rails. So I will either split it, and take a little out of the middle, or make a whole new one. It might be easier to just go with a flat pan, and roll the edges around the rails.
Any input on this?
I took some of the bare bike, and with the tank and tail section.
Post edited by: Jornum1, at: 2007/04/21 17:17
I chopped the tail, sluged it, and welded it back up.
Here is how we are looking. Everything is still rough, and needs a lot more work. But I am getting there.
next is the seat pan. I am still undecided about that. I cut the stock one, but I feel like its still too wide. I would really like it to hug the frame rails. So I will either split it, and take a little out of the middle, or make a whole new one. It might be easier to just go with a flat pan, and roll the edges around the rails.
Any input on this?
I took some of the bare bike, and with the tank and tail section.
Post edited by: Jornum1, at: 2007/04/21 17:17
Please Log in or Create an account to join the conversation.
- Maverick
- Offline
- User
Less
More
- Posts: 82
- Thank you received: 1
21 Apr 2007 18:44 #132624
by Maverick
1981 KZ1000M1
Replied by Maverick on topic 78 KZ750 w/ 03 Gsx-r Swingarm, Monoshock mounting questions (Pics)
Looks great! I like the short tail. Ending it right at the rear axle looks cool - like an old school cafe racer. Keep the pics comin'!
1981 KZ1000M1
Please Log in or Create an account to join the conversation.