- Posts: 1454
- Thank you received: 25
KZ650 Cafe Questions
- T_Dub
- Topic Author
- Offline
- User
Less
More
26 Feb 2010 08:43 #350270
by T_Dub
1977 KZ650B1
-810cc
-Cavanaugh Racing Head
-Mikuni RS34's
-GPR Muffler
KZ650 Cafe Questions was created by T_Dub
Does anybody know if there are any cafe tails that I can get and not have to chop up my rear subframe? Its a 650B1.
Or, does anybody know the distance from where the seat starts to the back of the subframe? These are the questions I'm forced to ask being 100 miles away from the bike.
Or, does anybody know the distance from where the seat starts to the back of the subframe? These are the questions I'm forced to ask being 100 miles away from the bike.
1977 KZ650B1
-810cc
-Cavanaugh Racing Head
-Mikuni RS34's
-GPR Muffler
Please Log in or Create an account to join the conversation.
- rstnick
- Offline
- User
Less
More
- Posts: 4373
- Thank you received: 377
26 Feb 2010 18:47 #350319
by rstnick
Rob
CANADA
Need a key for your Kawasaki? PM me
1978 KZ650 C2, 130K kms, Delkevic ex, EI, CVK32, PMC easy clutch, ATK fork brace, steering damper, braced swingarm, 18" Z1R front wheel.
2000 ZRX1100
2011 Ninja 250R
2005 z750s
Replied by rstnick on topic KZ650 Cafe Questions
The distance from the back end of the gas tank to the furthest rear portion of the frame is 27 1/4 inches on my C2, which should be the same for the B models.
There is a tab in the center of the rear frame loop for the rear fenders.
If this tab is removed, then the distance would be close to 27 inches.
There is a tab in the center of the rear frame loop for the rear fenders.
If this tab is removed, then the distance would be close to 27 inches.
Rob
CANADA
Need a key for your Kawasaki? PM me
1978 KZ650 C2, 130K kms, Delkevic ex, EI, CVK32, PMC easy clutch, ATK fork brace, steering damper, braced swingarm, 18" Z1R front wheel.
2000 ZRX1100
2011 Ninja 250R
2005 z750s
Please Log in or Create an account to join the conversation.
- T_Dub
- Topic Author
- Offline
- User
Less
More
- Posts: 1454
- Thank you received: 25
27 Feb 2010 07:23 #350369
by T_Dub
1977 KZ650B1
-810cc
-Cavanaugh Racing Head
-Mikuni RS34's
-GPR Muffler
Replied by T_Dub on topic KZ650 Cafe Questions
Thanks, thats exactly the length of the tail I'm thinking of using.
1977 KZ650B1
-810cc
-Cavanaugh Racing Head
-Mikuni RS34's
-GPR Muffler
Please Log in or Create an account to join the conversation.