- Posts: 47
- Thank you received: 0
Later Model Fork and Swingarm Swap Question
- Wildog
- Topic Author
- Offline
- User
Less
More
08 Mar 2010 16:25 #352040
by Wildog
Later Model Fork and Swingarm Swap Question was created by Wildog
I know this is beating a dead horse but, I just picked up a 1994 Kawasaki ZX600 doner bike for $200 everything there except plastics, my question is I am wanting to build my 1981 KZ1000 LTD into a streetfighter bike and was wondering if the mono rear and the front tripple will work from the 94 ZX600, or if anyone has used this setup. I have read past threads and know I will have to fab up brackets for the mono shock in the rear, my main concern is with chain alignment and stem swap or bearing replacement in the front forks. Any help would be great, just trying to get a feel of what I'm in store for.
Please Log in or Create an account to join the conversation.
- Old Man Rock
- Offline
- User
Less
More
- Posts: 6224
- Thank you received: 225
08 Mar 2010 16:59 #352051
by Old Man Rock
1976 KZ900-A4
MTC 1075cc.
Camshafts: Kawi GPZ-1100 .375 lift
Head: P&P via Larry Cavanaugh
ZX636 suspension
MIKUNI, RS-34'S...
Kerker 4-1, 1.5" comp baffle.
Dyna-S E.I.
Earls 10 row Oil Cooler
Acewell 2802 Series Speedo/Tach
Innovate LC1 Wideband 02 AFR meter
Phoenix, Az
Replied by Old Man Rock on topic Later Model Fork and Swingarm Swap Question
2005/6 ZX636 Front End Conversion:
kzrider.com/index.php?option=com_docman&...d&gid=431&Itemid=108
2003/2004 ZX6 Swing-arm conversion:
kzrider.com/index.php?option=com_docman&...d&gid=430&Itemid=108
Should be similar...
OMR
kzrider.com/index.php?option=com_docman&...d&gid=431&Itemid=108
2003/2004 ZX6 Swing-arm conversion:
kzrider.com/index.php?option=com_docman&...d&gid=430&Itemid=108
Should be similar...
OMR
1976 KZ900-A4
MTC 1075cc.
Camshafts: Kawi GPZ-1100 .375 lift
Head: P&P via Larry Cavanaugh
ZX636 suspension
MIKUNI, RS-34'S...
Kerker 4-1, 1.5" comp baffle.
Dyna-S E.I.
Earls 10 row Oil Cooler
Acewell 2802 Series Speedo/Tach
Innovate LC1 Wideband 02 AFR meter
Phoenix, Az
Please Log in or Create an account to join the conversation.
- mark1122
- Offline
- User
- Keep twisting it
Less
More
- Posts: 5359
- Thank you received: 109
09 Mar 2010 11:34 #352216
by mark1122
76 KZ, frame gusset work,1200CC.Ported by Larry Cavanaugh, 1.5mm.over intakes, Carron Pipe, ZRX12 rear end, and seat,96zx9 front end.
01 CBR600F4i Track bike.
Cobourg, Ont. Can.
~ ~ ~_@
~ ~ _- \,
~ (k) / (z)
Replied by mark1122 on topic Later Model Fork and Swingarm Swap Question
The front end is the easy part. as u likely know. u press out the stems and swap them. u will be able to use the stock kz bearings that way. we will need some pic's to help u more.
76 KZ, frame gusset work,1200CC.Ported by Larry Cavanaugh, 1.5mm.over intakes, Carron Pipe, ZRX12 rear end, and seat,96zx9 front end.
01 CBR600F4i Track bike.
Cobourg, Ont. Can.
~ ~ ~_@
~ ~ _- \,
~ (k) / (z)
Please Log in or Create an account to join the conversation.