Looking to get Clip-on Handlebars
- alexnelson
- Topic Author
- Offline
- User
Less
More
17 May 2010 11:00 #368528
by alexnelson
78 KZ650-D1
K&N pods + 4-1 Pipe
Mikuni VM24 - 7.5/115/#4 Clip
Dyna-S
Dyna 3-Ohm Coils
Vancouver BC
Looking to get Clip-on Handlebars was created by alexnelson
Brand recommendations and/or installation tips would be greatly appreciated.
Thanks guys.
Thanks guys.
78 KZ650-D1
K&N pods + 4-1 Pipe
Mikuni VM24 - 7.5/115/#4 Clip
Dyna-S
Dyna 3-Ohm Coils
Vancouver BC
Please Log in or Create an account to join the conversation.
- davel
- Offline
- User
Less
More
- Posts: 209
- Thank you received: 0
20 May 2010 00:32 #369179
by davel
Replied by davel on topic Looking to get Clip-on Handlebars
Mine are made by Harris Performance. Very good quality.
Re; installation. Check all clearences and cable lengths. I mounted the clip-ons above the top tripple clamp so fork tubes were pushed 1.5 inches up through the clamp. Bike also has an oil cooler so then fender-cooler clearance became an issue during full fork compression. Fork travel was reduced to resolve this.
Re; installation. Check all clearences and cable lengths. I mounted the clip-ons above the top tripple clamp so fork tubes were pushed 1.5 inches up through the clamp. Bike also has an oil cooler so then fender-cooler clearance became an issue during full fork compression. Fork travel was reduced to resolve this.
Attachments:
Please Log in or Create an account to join the conversation.
- Zthou1977
- Offline
- User
Less
More
- Posts: 96
- Thank you received: 0
20 May 2010 03:11 #369185
by Zthou1977
1977 Z1000A1, 1982-1986 KZ1000P (built from two piles of parts), Moto Martin Z1200 (trying to get it registered), 1977 Z650B1
Utrecht, The Netherlands
Replied by Zthou1977 on topic Looking to get Clip-on Handlebars
Check out the Telefix clipons: fully adjustable and very well made. They look really cool as well. Telefix also makes a superior fork brace.
www.telefix-products.de/
Check under 'Online Shop' and then 'Stummellenker'. Or click the English flag for a English-language catalogue in pdf-format.
www.telefix-products.de/
Check under 'Online Shop' and then 'Stummellenker'. Or click the English flag for a English-language catalogue in pdf-format.
1977 Z1000A1, 1982-1986 KZ1000P (built from two piles of parts), Moto Martin Z1200 (trying to get it registered), 1977 Z650B1
Utrecht, The Netherlands
Please Log in or Create an account to join the conversation.
- HerrDeacon
- Offline
- User
Less
More
- Posts: 642
- Thank you received: 1
20 May 2010 05:22 #369195
by HerrDeacon
Replied by HerrDeacon on topic Looking to get Clip-on Handlebars
Please Log in or Create an account to join the conversation.
- TexasKZ
- Offline
- Platinum Member
Less
More
- Posts: 7581
- Thank you received: 2237
20 May 2010 08:21 #369228
by TexasKZ
1982 KZ1000 LTD parts donor
1981 KZ1000 LTD awaiting resurrection
2000 ZRX1100 not ridden enough
Replied by TexasKZ on topic Looking to get Clip-on Handlebars
1982 KZ1000 LTD parts donor
1981 KZ1000 LTD awaiting resurrection
2000 ZRX1100 not ridden enough
Please Log in or Create an account to join the conversation.