- Posts: 6
- Thank you received: 0
master cylinder disassembly help
- rf56
- Topic Author
- Offline
- User
Less
More
21 Nov 2010 15:48 #413707
by rf56
master cylinder disassembly help was created by rf56
Have searched the forum for this info but can't seem to find it. I have a 1980 kz550 A-1 with single front caliper. Want to take apart the m/c but cant figure it out. Has the white "liner" with the cutouts holding it all in. Is a special tool required? Have shop manual and haynes type but they don't give info on disassembly. Thanks
Please Log in or Create an account to join the conversation.
- MFolks
- Offline
- User
Less
More
- Posts: 6650
- Thank you received: 540
21 Nov 2010 15:59 #413711
by MFolks
1982 GPZ1100 B2
General Dynamics/Convair 1983-1993
GLCM BGM-109 Tomahawk, AGM-129A Advanced Cruise Missile (ACM)
Replied by MFolks on topic master cylinder disassembly help
I Have a 1982 GPz1100 B2 with(I believe) a similar setup. I turned the liner with needlenose pliers and then pulled it out of the master cylinder. Check your's for a spring clip or snap ring.
1982 GPZ1100 B2
General Dynamics/Convair 1983-1993
GLCM BGM-109 Tomahawk, AGM-129A Advanced Cruise Missile (ACM)
Please Log in or Create an account to join the conversation.
- rf56
- Topic Author
- Offline
- User
Less
More
- Posts: 6
- Thank you received: 0
21 Nov 2010 16:10 #413713
by rf56
Replied by rf56 on topic master cylinder disassembly help
thanks brother, thought thats how it might work but wanted a second opinion first.
Please Log in or Create an account to join the conversation.
- rf56
- Topic Author
- Offline
- User
Less
More
- Posts: 6
- Thank you received: 0
21 Nov 2010 17:01 - 21 Nov 2010 17:03 #413717
by rf56
Replied by rf56 on topic master cylinder disassembly help
Well got the white liner thing out. Thought that held everything in. I don't see a snap ring unless it's behind the rubber dustcover. Is that it?
Last edit: 21 Nov 2010 17:03 by rf56.
Please Log in or Create an account to join the conversation.
- texasfisherdude
- Offline
- User
- 2 old 2 fat dont care
Less
More
- Posts: 113
- Thank you received: 2
21 Nov 2010 17:48 #413721
by texasfisherdude
Life's to short to drink cheap beer
1980 LTD 1000
Replied by texasfisherdude on topic master cylinder disassembly help
mine was stuck and I pushed the plunger in with my finger a few times and it came out
Life's to short to drink cheap beer
1980 LTD 1000
Please Log in or Create an account to join the conversation.
- Patton
- Offline
- KZr Legend
Less
More
- Posts: 18640
- Thank you received: 2098
21 Nov 2010 21:21 #413754
by Patton
1973 Z1
KZ900 LTD
Replied by Patton on topic master cylinder disassembly help
1973 Z1
KZ900 LTD
Attachments:
Please Log in or Create an account to join the conversation.