Can KZ 550 or 440 mags bolt right on to kz650?

More
26 Apr 2006 20:54 #43038 by elcid
Can KZ 550 or 440 mags bolt right on to kz650? was created by elcid
I want to switch my spoked wheels to 7 spoke mag wheels & want to find the ones that bolt on with the least amount of mods. Will the kz 550 or 440 be a good choice? I have a 79 KZ650 B...

Please Log in or Create an account to join the conversation.

More
27 Apr 2006 00:36 #43081 by loudhvx
Replied by loudhvx on topic Can KZ 550 or 440 mags bolt right on to kz650?
What about the 7 spoke mags from a 650? They had them starting in 1977. They used tubes, though.

The 550's were tubeless, but I don't think they are a direct bolt-on for you.

Post edited by: loudhvx, at: 2006/04/27 03:36
1981 KZ550 D1 gpz.
Kz550 valve train warning.
Other links.

Please Log in or Create an account to join the conversation.

More
27 Apr 2006 09:27 #43154 by steell
Replied by steell on topic Can KZ 550 or 440 mags bolt right on to kz650?
There is a Kawasaki wheel bearing list in the FileBase that lists what bearings fit what bike. If the 440/550 and 650 bearings are the same number it makes things a whole lot easier.

Post edited by: steell, at: 2006/04/27 12:28
KD9JUR

Please Log in or Create an account to join the conversation.

More
27 Apr 2006 10:45 #43171 by rstnick
Replied by rstnick on topic Can KZ 550 or 440 mags bolt right on to kz650?
I have a front and back mag from a '79 C3. Where are you located? Shipping can be expensive. I'm North of Toronto ON, Canada.
Rob
CANADA

Need a key for your Kawasaki? PM me

1978 KZ650 C2, 130K kms, Delkevic ex, EI, CVK32, PMC easy clutch, ATK fork brace, steering damper, braced swingarm, 18" Z1R front wheel.
2000 ZRX1100
2011 Ninja 250R
2005 z750s

Please Log in or Create an account to join the conversation.

More
27 Apr 2006 10:54 #43175 by elcid
Replied by elcid on topic Can KZ 550 or 440 mags bolt right on to kz650?
yeah that may be a bit high for me. I am in Los ANgeles. Unless I can get them for less than $50 shipped, then it would not be worth it for me. Thanx though!

Please Log in or Create an account to join the conversation.

More
28 Apr 2006 11:38 #43430 by elcid
Replied by elcid on topic Can KZ 550 or 440 mags bolt right on to kz650?
did the mags from kz650 have a rear hub brake? Something tells me they had disc setup. Now is there any major difference in the mags from kz440 or kz550? Is one belt drive & the other chain? any differences?

Please Log in or Create an account to join the conversation.

More
28 Apr 2006 12:12 #43436 by steell
Replied by steell on topic Can KZ 550 or 440 mags bolt right on to kz650?
I know the 80 KZ650F had mags with a rear drum brake, don't know for sure about any others.
KD9JUR

Please Log in or Create an account to join the conversation.

More
28 Apr 2006 12:20 #43438 by elcid
Replied by elcid on topic Can KZ 550 or 440 mags bolt right on to kz650?
Damn I need those! Were they 16 on back & 19 on front?

Please Log in or Create an account to join the conversation.

More
05 May 2006 00:35 #45218 by elcid
Replied by elcid on topic Can KZ 550 or 440 mags bolt right on to kz650?
oops -wrong thread..

Post edited by: elcid, at: 2006/05/05 03:37

Please Log in or Create an account to join the conversation.

More
05 May 2006 10:08 #45280 by 77_650B1
Replied by 77_650B1 on topic Can KZ 550 or 440 mags bolt right on to kz650?
I've been looking, and the wheels from an 82 kz550, at least the rear ones, would fit perfectly on my 77 KZ650. The damper, brakes, and spacers are all the same.
1977 KZ650-B1
-Dual Discs
-Dyna-S
-WG Coil Mod
-Alloy Wheels

Please Log in or Create an account to join the conversation.

More
05 May 2006 10:18 #45284 by elcid
Replied by elcid on topic Can KZ 550 or 440 mags bolt right on to kz650?
you can look at axle sizes here to see what is compatible:

www.hortoncustoms.net/hardcore/viewforum...7761deb4437923eb9a11

I got these kz400 mags & the back swaps fine but the front had a smaller axle. So I had to get different bearings with a spacer made to fit. It is a bit of modding but that is the name of the game...

Please Log in or Create an account to join the conversation.

Powered by Kunena Forum

Forum Links