KZ 750 swing arm swap

Hey guys,
Just wondering if anybody has any info on this swingarm swap. kz750 4 cylinder using a 91 zr550 swing arm. If so this is the info I'm looking for:
- What rim rim will bolt right up? (GSXR,ZZR,CBR, etc) Don't want to use a zr550 rim, just because I don't like the style of them.Not looking for the widest either, stock rim and tire size will work just fine.
- What modding is involved?
- Any other ideas or info on this swap, would be great thanks.

Thanks Much,

id like to know too. i know this is old. anyone know the pivot width of the kz750 swing arm?
same as kz450-550-650-900-1000?

i have an 83 factory mono setup on an 87 if anyone needs measurements

i found this but it doesnt give any measurements

"200-350: interchangeable
400-550: interchangeable
650:750: interchangeable although the twin model is a bastard when it comes to this the coils and starter clutch are all different.
900-1000: interchangeable"

kz 1000 9 1/4" inside dimension of frame at pivot.
kz 700 9" inside dimension of frame at pivot.

thats all i know.

leon

I put a 81` KZ750E swingarm on my 77` KZ1000A, had to add two .100" spacers on each side to make up the difference in width, and square the swingarm in the chassis. Only needed a .020" shim on the countershaft sprocket to align with rear sprocket..

Why you ask, it is 1.5" shorter, makes the steering feel muck quicker, and I wanted to have the factory mag wheel rear and keep the 18" instead of the 16" LTD wheel. Plus the weight savings between the total package, about three pounds lighter.

FWIW, hope this helps.