- Posts: 20
- Thank you received: 0
Odd Tire Wear..maybe?
- Haz
- Topic Author
- Offline
- User
First time poster, long time lurker here. I've got a question that I'm hoping someone might be able to shed some light on. Maybe it's a typical bike thing that I just don't know about but, I'm seeing a weird pattern on the front tire of my 81' Kz750 LTD. Every other lug is worn substantially more than the ones beside it. The tire seems like its in ok shape and has lots of tread on in, but I think I'm probably going to replace it because it freaks me out a bit. Has anyone seen this before?
I've attached a photo to give you the idea.
Maybe I'm just crazy?
'81 KZ750-H2
Please Log in or Create an account to join the conversation.
- MFolks
- Offline
- User
- Posts: 6650
- Thank you received: 540
Do you ride two up(passenger)a lot? or just by yourself? How old's the tires? Any instability on the road? Swing arm bushings/bearings in good shape? Steering stem bearings good?
1982 GPZ1100 B2
General Dynamics/Convair 1983-1993
GLCM BGM-109 Tomahawk, AGM-129A Advanced Cruise Missile (ACM)
Please Log in or Create an account to join the conversation.
- Patton
- Offline
- KZr Legend
- Posts: 18640
- Thank you received: 2098
Haz wrote: Hi All
First time poster, long time lurker here. I've got a question that I'm hoping someone might be able to shed some light on. Maybe it's a typical bike thing that I just don't know about but, I'm seeing a weird pattern on the front tire of my 81' Kz750 LTD. Every other lug is worn substantially more than the ones beside it. The tire seems like its in ok shape and has lots of tread on in, but I think I'm probably going to replace it because it freaks me out a bit. Has anyone seen this before?
I've attached a photo to give you the idea.
Maybe I'm just crazy?
Hello, Haz, and WELCOME to KZr and participation on the forum!
Here's what Dunlop says:
How can I keep my tires from cupping?
You may not be able to entirely avoid cupping. Tire cupping or irregular wear is a somewhat common occurrence on all vehicles. On a four-wheel vehicle, you are advised to rotate your tires periodically to even out wear. Unfortunately, you do not have this luxury with a motorcycle because front and rear tires, unlike those on a four-wheel vehicle, are not interchangeable.
However, there are steps that can be taken to minimize cupping and uneven wear on a motorcycle:
Maintain your motorcycle and particularly your front forks and suspension.
Avoid hard braking whenever possible. Braking causes the tire to grab and wear in one direction. When braking is applied to the front tire, the load transfer over-flexes the tire and increases the tendency for cupping and uneven wear.
Maintain your tire pressures. Underinflation or overinflation in motorcycle tires are significant causes of cupping and uneven wear, particularly in association with hard braking and/or trailer use.
Some of today's tires feature tread patterns and constructions that are less prone to cupping than the ribbed tires of old. The Dunlop 491, D401 and D402 touring and sport touring tires are good examples.
Tire companies can, and are, helping to minimize cupping and uneven wear but you, the rider, must do your part. Follow the aforementioned guidelines. How Much Run-in Should I Give a New Tire? When new tires are fitted, they should not be subjected to maximum power or hard cornering until a reasonable run-in distance of approximately 100 miles has been achieved.
This is necessary for a number of reasons. Replacements for worn tires with different patterns and construction will not react the same. Also, a new tire is stiffer than an old tire. The new tire has a rounder tread profile, different contact patch and "lean-over edge" than the worn profile of an old tire. The new tire will also not react the same in combination with its remaining tire.
Carrying out the required run-in will allow you to become accustomed to the "feel" of the new tires and tire combinations, so you are better able to achieve optimum road grip for use in high speed, high acceleration and handling situations.
I've also suspected that a warped front brake rotor evidenced by pulsing during brake application might also contribute to the cupping.
Good Fortune!
1973 Z1
KZ900 LTD
Please Log in or Create an account to join the conversation.
- RonKZ650
- Offline
- User
- Posts: 3703
- Thank you received: 241
321,000 miles on KZ's that I can remember. Not going to see any more.
Please Log in or Create an account to join the conversation.
- Haz
- Topic Author
- Offline
- User
- Posts: 20
- Thank you received: 0
I don't ride with passengers a whole lot, and I haven't noticed any instability after the fork job. Steering head bearing was done at the beginning of last year and it still seems solid. But I do tend to favour the front brake, and hard in turns?? that's my favourite part!
It sounds like this isn't a huge surprise then, it just seemed strange when I finally noticed it because the pattern was so regular, it looked like it was meant to be that way. It had me wondering "Was the tire like that when I bought it?"
Thanks for the input folks!
'81 KZ750-H2
Please Log in or Create an account to join the conversation.