Raking headset on Z900B frame

More
13 Aug 2011 19:47 #468861 by Gaylord
Raking headset on Z900B frame was created by Gaylord
Hi, New member here. Am building a street/drag Z900 and am interested if anyone has raked this frame and how they did it. Also can anyone identify my frame as I don't have documents for it. I believe it is a '76 LTD, Frame no. is Z900B-504881.

Please Log in or Create an account to join the conversation.

  • wireman
  • Offline
  • User
  • The most interesting prick in the world
More
13 Aug 2011 20:45 #468866 by wireman
Replied by wireman on topic Raking headset on Z900B frame
the B in the serial number says ltd to me anyway.how much are you trying to rake the frame,streetbike-dragbike?
have you thought about picking up a differant kz frame to rake,the 900 ltd's are on the scarce side .
id be willing to bet somebody looking to restore a chopped up 900ltd would pay decent money for that origional frame,regular kz900/1000 frames can be picked up pretty cheap B)

posting from deep under a non-descript barn in an undisclosed location southwest of Omaha.
The following user(s) said Thank You: Gaylord

Please Log in or Create an account to join the conversation.

More
13 Aug 2011 21:21 #468875 by roy-b-boy-b
Replied by roy-b-boy-b on topic Raking headset on Z900B frame
X2

1979 LTD Street Fighter.1977 KZ1000

Please Log in or Create an account to join the conversation.

More
14 Aug 2011 12:44 #469027 by kawman66
Replied by kawman66 on topic Raking headset on Z900B frame

Gaylord wrote: Hi, New member here. Am building a street/drag Z900 and am interested if anyone has raked this frame and how they did it. Also can anyone identify my frame as I don't have documents for it. I believe it is a '76 LTD, Frame no. is Z900B-504881.


there should be a k in front of the z if so then yes it is a 76 ltd 900. as far as rakeing it all depends on how far you want to go as to what can or should be done.

75 z1b
76 kz900ltd
76 kz900
76 kz900-1500
77 kz1000ltd


my drinking team has a racing problem

Please Log in or Create an account to join the conversation.

  • wireman
  • Offline
  • User
  • The most interesting prick in the world
More
14 Aug 2011 16:17 #469052 by wireman
Replied by wireman on topic Raking headset on Z900B frame
is there a bracket for rear master cylinder welded on frame just under the right rear shock mount?thats a 76 900/ltd only thing B)

posting from deep under a non-descript barn in an undisclosed location southwest of Omaha.

Please Log in or Create an account to join the conversation.

  • z1kzonly
  • Offline
  • User
  • Sustaining Member
More
14 Aug 2011 22:49 #469100 by z1kzonly
Replied by z1kzonly on topic Raking headset on Z900B frame
Just do it!

Livin in "CheektaVegas, NY
Went thru 25 of these in 40 yrs.
I SOLD OUT! THE KAW BARN IS EMPTY.
More room for The Old Girl, Harley 75 FLH Electra Glide,
Old faithful! Points ign. Bendix Orig. carb.
Starts everytime!

Attachments:

Please Log in or Create an account to join the conversation.

More
18 Aug 2011 09:31 #469716 by roy-b-boy-b
Replied by roy-b-boy-b on topic Raking headset on Z900B frame

1979 LTD Street Fighter.1977 KZ1000

Please Log in or Create an account to join the conversation.

More
21 Aug 2011 15:39 #470681 by Gaylord
Replied by Gaylord on topic Raking headset on Z900B frame
Thanks for help identifying my frame. It has the bracket for rear m/cyl so now I know what i've got...
I raked a CBX Honda 6 cyl by cutting the original headset in half vertically, trimming the back top section more than the lower part to achieve the required angle which was 37 degrees and letting in a cleaned up used headset. This way all the original welds to the frame tubes retain their integrity and the new headset is firmly nested into the back half of the original headset tube.Not quite as pretty as some but nice and strong. Wish me luck !!

Please Log in or Create an account to join the conversation.

  • z1kzonly
  • Offline
  • User
  • Sustaining Member
More
13 Sep 2011 18:27 #476443 by z1kzonly
Replied by z1kzonly on topic Raking headset on Z900B frame
Here is another project, It is for sale.
KZ900 with offset bearing plate from Irishwill.
Chromoly swingarm, with struts, and roller bearings for the neck. It has a NYState title






Livin in "CheektaVegas, NY
Went thru 25 of these in 40 yrs.
I SOLD OUT! THE KAW BARN IS EMPTY.
More room for The Old Girl, Harley 75 FLH Electra Glide,
Old faithful! Points ign. Bendix Orig. carb.
Starts everytime!

Attachments:

Please Log in or Create an account to join the conversation.

Powered by Kunena Forum