- Posts: 31
- Thank you received: 0
front end
- customkz1000
- Topic Author
- Offline
- User
Less
More
25 Aug 2011 21:49 #471778
by customkz1000
front end was created by customkz1000
When I go around a left hand corner at moderate speeds the front end wobbles. What could it be?
Please Log in or Create an account to join the conversation.
- hocbj23
- Visitor
25 Aug 2011 21:58 #471780
by hocbj23
Replied by hocbj23 on topic front end
Possibilities:
Triple tree bearings worn and /or need adjustment.
Swingarm bushings worn
tire(s) worn or need balancing
front bearings worn and/or need repacking
the dreaded Kaw front end wobble-call for an exorcist.Lol.bj
Triple tree bearings worn and /or need adjustment.
Swingarm bushings worn
tire(s) worn or need balancing
front bearings worn and/or need repacking
the dreaded Kaw front end wobble-call for an exorcist.Lol.bj
Please Log in or Create an account to join the conversation.
- 531blackbanshee
- Offline
- Vendor
Less
More
- Posts: 7447
- Thank you received: 797
26 Aug 2011 10:15 #471912
by 531blackbanshee
skiatook,oklahoma 1980 z1r,1978 kz 1000 z1r x 3,
1976 kz 900 x 3
i make what i can,and save the rest!
billybiltit.blogspot.com/
www.kzrider.com/forum/5-chassis/325862-triple-tree-custom-work
kzrider.com/forum/5-chassis/294594-frame-bracing?limitstart=0
Replied by 531blackbanshee on topic front end
bent rotor.
leon
leon
skiatook,oklahoma 1980 z1r,1978 kz 1000 z1r x 3,
1976 kz 900 x 3
i make what i can,and save the rest!
billybiltit.blogspot.com/
www.kzrider.com/forum/5-chassis/325862-triple-tree-custom-work
kzrider.com/forum/5-chassis/294594-frame-bracing?limitstart=0
Please Log in or Create an account to join the conversation.
- MFolks
- Offline
- User
Less
More
- Posts: 6650
- Thank you received: 540
26 Aug 2011 20:35 #472019
by MFolks
1982 GPZ1100 B2
General Dynamics/Convair 1983-1993
GLCM BGM-109 Tomahawk, AGM-129A Advanced Cruise Missile (ACM)
Replied by MFolks on topic front end
I copied this from a post from Jeff Saunders(owner of Z1 enterprises)
Motorcycle Wobble Causes
There's a LONG list of potential area that can cause this.
These are not in any particular order
Wheel bearings
Steering bearings - repack grease, check tightness
Swing arm bushings/sleeves/bearings - replace is worn, repack grease
Fork springs aging - check spring length
Unequal fork oil - if seals leak, then your damping can be ineffective
Rear shocks aging, damper leaks - if you have oil leaking from the seals, the damping is toast.
Worn Tires/Mismatched tires/tire pressures/wrong size tires
Wheel alignment - don't trust the chain adjusters - I visually align the wheels.
Bent rims/broken spokes - get the wheels off the ground and spin them - check for runout / damage
Front disc warped - check for runout
Steering & swing arm bearings are very common problems, but so are tire issues (pressure/mismatch) and wheel alignment.
Motorcycle Wobble Causes
There's a LONG list of potential area that can cause this.
These are not in any particular order
Wheel bearings
Steering bearings - repack grease, check tightness
Swing arm bushings/sleeves/bearings - replace is worn, repack grease
Fork springs aging - check spring length
Unequal fork oil - if seals leak, then your damping can be ineffective
Rear shocks aging, damper leaks - if you have oil leaking from the seals, the damping is toast.
Worn Tires/Mismatched tires/tire pressures/wrong size tires
Wheel alignment - don't trust the chain adjusters - I visually align the wheels.
Bent rims/broken spokes - get the wheels off the ground and spin them - check for runout / damage
Front disc warped - check for runout
Steering & swing arm bearings are very common problems, but so are tire issues (pressure/mismatch) and wheel alignment.
1982 GPZ1100 B2
General Dynamics/Convair 1983-1993
GLCM BGM-109 Tomahawk, AGM-129A Advanced Cruise Missile (ACM)
Please Log in or Create an account to join the conversation.
- wireman
- Offline
- User
- The most interesting prick in the world
Less
More
- Posts: 4761
- Thank you received: 299
26 Aug 2011 20:40 #472024
by wireman
posting from deep under a non-descript barn in an undisclosed location southwest of Omaha.
Replied by wireman on topic front end
jack frontend of bike up off of ground and start shaking it side to side up/down
posting from deep under a non-descript barn in an undisclosed location southwest of Omaha.
Please Log in or Create an account to join the conversation.
- mark1122
- Offline
- User
- Keep twisting it
Less
More
- Posts: 5359
- Thank you received: 109
27 Aug 2011 04:45 #472099
by mark1122
then do the rear end.
76 KZ, frame gusset work,1200CC.Ported by Larry Cavanaugh, 1.5mm.over intakes, Carron Pipe, ZRX12 rear end, and seat,96zx9 front end.
01 CBR600F4i Track bike.
Cobourg, Ont. Can.
~ ~ ~_@
~ ~ _- \,
~ (k) / (z)
Replied by mark1122 on topic front end
wireman wrote: jack frontend of bike up off of ground and start shaking it side to side up/down
then do the rear end.
76 KZ, frame gusset work,1200CC.Ported by Larry Cavanaugh, 1.5mm.over intakes, Carron Pipe, ZRX12 rear end, and seat,96zx9 front end.
01 CBR600F4i Track bike.
Cobourg, Ont. Can.
~ ~ ~_@
~ ~ _- \,
~ (k) / (z)
The following user(s) said Thank You: wireman
Please Log in or Create an account to join the conversation.