- Posts: 1051
- Thank you received: 12
Brake pedal return spring
- clutch
- Topic Author
- Offline
- User
- I wish I had a tad more patience to do it better!
Less
More
12 Oct 2011 01:57 #482698
by clutch
Southern Maryland, USA
1980 KZ250 LTD (traded, but still missed)
1982 KZ750 E3 (Cafe Project) (Dyna-S, Dyna Coils, V&H 4-1, K&N Pods, 6 Sigma Jet Kit, Acewell Computer, Woodcraft Clip-ons, Custom Rewire)
1966 A1 Samurai (Restoration Project)
Wish List:
KZ1000 P (For a "touring" bike)
Z1 (need I...
Brake pedal return spring was created by clutch
I'm not sure when or where I lost my brake pedal return spring for my kz750 e3, but I have an assortment of springs and one may work. Does anyone have one handy they can measure and take a pic of for me? If you have to remove it from your bike, it will probably be more work than it's worth. I just want to try to narrow down the possibilities out of the spring assortment I have.
Thanks,
Clutch
Thanks,
Clutch
Southern Maryland, USA
1980 KZ250 LTD (traded, but still missed)
1982 KZ750 E3 (Cafe Project) (Dyna-S, Dyna Coils, V&H 4-1, K&N Pods, 6 Sigma Jet Kit, Acewell Computer, Woodcraft Clip-ons, Custom Rewire)
1966 A1 Samurai (Restoration Project)
Wish List:
KZ1000 P (For a "touring" bike)
Z1 (need I...
Please Log in or Create an account to join the conversation.
- clutch
- Topic Author
- Offline
- User
- I wish I had a tad more patience to do it better!
Less
More
- Posts: 1051
- Thank you received: 12
12 Oct 2011 15:02 #482780
by clutch
Southern Maryland, USA
1980 KZ250 LTD (traded, but still missed)
1982 KZ750 E3 (Cafe Project) (Dyna-S, Dyna Coils, V&H 4-1, K&N Pods, 6 Sigma Jet Kit, Acewell Computer, Woodcraft Clip-ons, Custom Rewire)
1966 A1 Samurai (Restoration Project)
Wish List:
KZ1000 P (For a "touring" bike)
Z1 (need I...
Replied by clutch on topic Brake pedal return spring
So I ended up finding a good candidate in the bunch...it's about 2.5 inches long (from loop to loop. I did have to cut a piece of one of the loops off with some bolt cutters so I could hook it on the pedal lever, and then stretched it to fit over the bar on the foot peg mount. I will post a pic or two sometime soon in case anyone else needs to do the same
Southern Maryland, USA
1980 KZ250 LTD (traded, but still missed)
1982 KZ750 E3 (Cafe Project) (Dyna-S, Dyna Coils, V&H 4-1, K&N Pods, 6 Sigma Jet Kit, Acewell Computer, Woodcraft Clip-ons, Custom Rewire)
1966 A1 Samurai (Restoration Project)
Wish List:
KZ1000 P (For a "touring" bike)
Z1 (need I...
Please Log in or Create an account to join the conversation.
- clutch
- Topic Author
- Offline
- User
- I wish I had a tad more patience to do it better!
Less
More
- Posts: 1051
- Thank you received: 12
14 Oct 2011 01:48 #483084
by clutch
Southern Maryland, USA
1980 KZ250 LTD (traded, but still missed)
1982 KZ750 E3 (Cafe Project) (Dyna-S, Dyna Coils, V&H 4-1, K&N Pods, 6 Sigma Jet Kit, Acewell Computer, Woodcraft Clip-ons, Custom Rewire)
1966 A1 Samurai (Restoration Project)
Wish List:
KZ1000 P (For a "touring" bike)
Z1 (need I...
Replied by clutch on topic Brake pedal return spring
Here is the pic I promised. I couldn't get a good one of the spring installed, but it works just fine in case you need an easy fix.
Southern Maryland, USA
1980 KZ250 LTD (traded, but still missed)
1982 KZ750 E3 (Cafe Project) (Dyna-S, Dyna Coils, V&H 4-1, K&N Pods, 6 Sigma Jet Kit, Acewell Computer, Woodcraft Clip-ons, Custom Rewire)
1966 A1 Samurai (Restoration Project)
Wish List:
KZ1000 P (For a "touring" bike)
Z1 (need I...
Please Log in or Create an account to join the conversation.