- Posts: 1051
- Thank you received: 12
A question for those running Raask rearsets
- clutch
-
Topic Author
- Offline
- User
- I wish I had a tad more patience to do it better!
16 Oct 2011 00:44 #483457
by clutch
Southern Maryland, USA
1980 KZ250 LTD (traded, but still missed)
1982 KZ750 E3 (Cafe Project) (Dyna-S, Dyna Coils, V&H 4-1, K&N Pods, 6 Sigma Jet Kit, Acewell Computer, Woodcraft Clip-ons, Custom Rewire)
1966 A1 Samurai (Restoration Project)
Wish List:
KZ1000 P (For a "touring" bike)
Z1 (need I...
A question for those running Raask rearsets was created by clutch
So I have a set of Raask rearsets, and I love the footpeg position, controls, etc. Here's a pic:
As I said, I love MOST everything about them....but they have no rubber padding to dampen vibration and my feet go a little numb after a short while. Have any of you swapped out the pegs, or figured out some way to put a rubber cover over them? I'm not running them currently because of this issue and would like to figure it out so I can use them again.
As I said, I love MOST everything about them....but they have no rubber padding to dampen vibration and my feet go a little numb after a short while. Have any of you swapped out the pegs, or figured out some way to put a rubber cover over them? I'm not running them currently because of this issue and would like to figure it out so I can use them again.
Southern Maryland, USA
1980 KZ250 LTD (traded, but still missed)
1982 KZ750 E3 (Cafe Project) (Dyna-S, Dyna Coils, V&H 4-1, K&N Pods, 6 Sigma Jet Kit, Acewell Computer, Woodcraft Clip-ons, Custom Rewire)
1966 A1 Samurai (Restoration Project)
Wish List:
KZ1000 P (For a "touring" bike)
Z1 (need I...
Please Log in or Create an account to join the conversation.
- 531blackbanshee
-
- Offline
- Vendor
17 Oct 2011 12:35 #483744
by 531blackbanshee
skiatook,oklahoma 1980 z1r,1978 kz 1000 z1r x 3,
1976 kz 900 x 3
i make what i can,and save the rest!
billybiltit.blogspot.com/
www.kzrider.com/forum/5-chassis/325862-triple-tree-custom-work
kzrider.com/forum/5-chassis/294594-frame-bracing?limitstart=0
Replied by 531blackbanshee on topic A question for those running Raask rearsets
it looks as though there may be some rubber covered pegs for them.
i googled "raask rearset with rubber pegs and found this pic".
you could also find some black heater hose that was the right inside dia.and cut it to length and slide it over your pegs.i have done this for handles on custom hammers i have built before.
hth,
leon
i googled "raask rearset with rubber pegs and found this pic".
you could also find some black heater hose that was the right inside dia.and cut it to length and slide it over your pegs.i have done this for handles on custom hammers i have built before.
hth,
leon
skiatook,oklahoma 1980 z1r,1978 kz 1000 z1r x 3,
1976 kz 900 x 3
i make what i can,and save the rest!
billybiltit.blogspot.com/
www.kzrider.com/forum/5-chassis/325862-triple-tree-custom-work
kzrider.com/forum/5-chassis/294594-frame-bracing?limitstart=0
Please Log in or Create an account to join the conversation.
- clutch
-
Topic Author
- Offline
- User
- I wish I had a tad more patience to do it better!
17 Oct 2011 13:12 #483752
by clutch
Southern Maryland, USA
1980 KZ250 LTD (traded, but still missed)
1982 KZ750 E3 (Cafe Project) (Dyna-S, Dyna Coils, V&H 4-1, K&N Pods, 6 Sigma Jet Kit, Acewell Computer, Woodcraft Clip-ons, Custom Rewire)
1966 A1 Samurai (Restoration Project)
Wish List:
KZ1000 P (For a "touring" bike)
Z1 (need I...
Replied by clutch on topic A question for those running Raask rearsets
Cool! Thanks for the ideas 
Southern Maryland, USA
1980 KZ250 LTD (traded, but still missed)
1982 KZ750 E3 (Cafe Project) (Dyna-S, Dyna Coils, V&H 4-1, K&N Pods, 6 Sigma Jet Kit, Acewell Computer, Woodcraft Clip-ons, Custom Rewire)
1966 A1 Samurai (Restoration Project)
Wish List:
KZ1000 P (For a "touring" bike)
Z1 (need I...
Please Log in or Create an account to join the conversation.
- gwolever
-
- Offline
- User
- clutch
-
Topic Author
- Offline
- User
- I wish I had a tad more patience to do it better!
17 Oct 2011 13:44 #483768
by clutch
I got mine from Omar:
OMAR
Mine are the "z750 4-cyl". I don't know if they will fit your model, but he does list a set for the KZ1000 ST, which may fit your bike. Others would know better than I
Southern Maryland, USA
1980 KZ250 LTD (traded, but still missed)
1982 KZ750 E3 (Cafe Project) (Dyna-S, Dyna Coils, V&H 4-1, K&N Pods, 6 Sigma Jet Kit, Acewell Computer, Woodcraft Clip-ons, Custom Rewire)
1966 A1 Samurai (Restoration Project)
Wish List:
KZ1000 P (For a "touring" bike)
Z1 (need I...
Replied by clutch on topic A question for those running Raask rearsets
gwolever wrote: Hey clutch. Which bike do you run those rearsets? I am looking to get some rearsets for my 82 KZ1000 CSR, but my bikeis not listedon the raask site as an option to order some.
Was wondering which ones you ordered and if they would fit my bike too?
Thanks.
I got mine from Omar:
OMAR
Mine are the "z750 4-cyl". I don't know if they will fit your model, but he does list a set for the KZ1000 ST, which may fit your bike. Others would know better than I
Southern Maryland, USA
1980 KZ250 LTD (traded, but still missed)
1982 KZ750 E3 (Cafe Project) (Dyna-S, Dyna Coils, V&H 4-1, K&N Pods, 6 Sigma Jet Kit, Acewell Computer, Woodcraft Clip-ons, Custom Rewire)
1966 A1 Samurai (Restoration Project)
Wish List:
KZ1000 P (For a "touring" bike)
Z1 (need I...
Please Log in or Create an account to join the conversation.
- gwolever
-
- Offline
- User
- cobura
-
- Offline
- User
- forever 2 wheels
- seanof30306
-
- Offline
- User