- Posts: 837
- Thank you received: 72
EX500 / zx600 triple clamps
- turboguzzi
-
Topic Author
- Offline
- User
26 Oct 2011 19:02 #485497
by turboguzzi
EX500 / zx600 triple clamps was created by turboguzzi
ok, here's the story
been sharpening the rake angle in my GPZ racer from the stock 27 degs to 24-25 by raising the back. quickened the steering quite a bit, but want to restore the trail that got reduced for better weight transfer.
the triple clamps in my gpz have 45 mm of offset (see picture). as the EX-500D1-D11 “Ninja 500R” (94-04) and ZX-600A1-A3 “Ninja” (85-87) have also 37mm forks, i would like to know if any owners are willing to measure the offset in their clamps. that would let me do an easy swap in terms of bearings and such.
your help will be appreciated (and help me go around the track faster
)
been sharpening the rake angle in my GPZ racer from the stock 27 degs to 24-25 by raising the back. quickened the steering quite a bit, but want to restore the trail that got reduced for better weight transfer.
the triple clamps in my gpz have 45 mm of offset (see picture). as the EX-500D1-D11 “Ninja 500R” (94-04) and ZX-600A1-A3 “Ninja” (85-87) have also 37mm forks, i would like to know if any owners are willing to measure the offset in their clamps. that would let me do an easy swap in terms of bearings and such.
your help will be appreciated (and help me go around the track faster
) Attachments:
Please Log in or Create an account to join the conversation.