530 conversion with a GS1100 swingarm

More
30 Oct 2011 19:55 #486117 by 55fbomb
530 conversion with a GS1100 swingarm was created by 55fbomb
any of you guys runnin a 530 conversion with a gs1100 swingarm remember how long of a chain you needed. bike is a 77 KZ1000 and its due for a new chain and sprockets so im going with a little steeper gearing and a new o ring chain. also, anyone have a particular gear ratio that worked out well for them in 530? thanks.

1974 CB750
1975 CB750
197? CB750 mutt
1977 KZ1000

Please Log in or Create an account to join the conversation.

More
30 Oct 2011 20:02 #486120 by DFIGPZ
Replied by DFIGPZ on topic 530 conversion with a GS1100 swingarm
I would contact JEFF at Z-1 ENTERPRISES he should have info you need.

1984 750 Turbo

Please Log in or Create an account to join the conversation.

  • mark1122
  • Offline
  • User
  • Keep twisting it
More
30 Oct 2011 20:07 - 30 Oct 2011 20:12 #486122 by mark1122
Replied by mark1122 on topic 530 conversion with a GS1100 swingarm
i run a 19 42 on minejust get a 110 link and cut it to fit.

76 KZ, frame gusset work,1200CC.Ported by Larry Cavanaugh, 1.5mm.over intakes, Carron Pipe, ZRX12 rear end, and seat,96zx9 front end.
01 CBR600F4i Track bike.
Cobourg, Ont. Can.

~ ~ ~_@
~ ~ _- \,
~ (k) / (z)
Last edit: 30 Oct 2011 20:12 by mark1122.

Please Log in or Create an account to join the conversation.

More
31 Oct 2011 03:40 #486208 by donthekawguy
Replied by donthekawguy on topic 530 conversion with a GS1100 swingarm
I think I use a 110 and had to cut off four or five links.

Rathdrum Idaho
1971 Kawasaki g3ss
1972 Yamaha R5 350
1965 Suzuki Hillbilly
1964 Yamaha 125

Please Log in or Create an account to join the conversation.

More
31 Oct 2011 22:46 #486394 by toad
Replied by toad on topic 530 conversion with a GS1100 swingarm
I believe I use 18/45 z1 will give you the correct info.Rim size could play a factor as well.

78 kz 1000
wiesco 1015
29mm smoothbores
gs1100 swingarm
gsxr rear

Please Log in or Create an account to join the conversation.

Powered by Kunena Forum