How to adjust the odometer?

More
21 Nov 2011 15:44 #489499 by Kapahulu
How to adjust the odometer? was created by Kapahulu
My odometer shows less mileage than the title. Apparently the speedometer/odometer is not original.

Can I "up" the mileage on the odometer by hooking the cable up to a drill or something like that? Reason: If I should happen to sell the bike, it makes things complicated going to the DMV with a title that shows more miles than the odometer. In Hawaii we have vehicle safety inspections with the mileage is noted. The safety inspection certificate must be presented when the title is transferred.

Thanks, Mike

1978 KZ1000, 1976 KZ900, 1975 H2, 1973 H1, 1973 H2, 1978 RD400, 1977 RD400, 1974 RD350
2strokeworld.com

Please Log in or Create an account to join the conversation.

More
21 Nov 2011 16:36 #489506 by MFolks
Replied by MFolks on topic How to adjust the odometer?
I suppose you could get an electric drill and run the miles up by spinning the cable(if your bike has the cable driven speedometer). Some Kawasaki's had an electric speedometer using sensors, making this job a lot harder.

1982 GPZ1100 B2
General Dynamics/Convair 1983-1993
GLCM BGM-109 Tomahawk, AGM-129A Advanced Cruise Missile (ACM)

Please Log in or Create an account to join the conversation.

More
21 Nov 2011 18:59 #489524 by Kapahulu
Replied by Kapahulu on topic How to adjust the odometer?
It's cable driven, just wondering if that method will work.

1978 KZ1000, 1976 KZ900, 1975 H2, 1973 H1, 1973 H2, 1978 RD400, 1977 RD400, 1974 RD350
2strokeworld.com

Please Log in or Create an account to join the conversation.

  • porchev914
  • Offline
  • User
  • Whats that? Half of my swingarm is missing?!?!?
More
21 Nov 2011 19:42 #489537 by porchev914
Replied by porchev914 on topic How to adjust the odometer?
It sure will. I've done it before, but I used a dremel. It takes a little while, depending on how many miles you need to roll on of course B)

FRANKEN Z!
1978 KZ1000 A2A with 08'Speed Triple SSSA and '06 GSXR1000 front end

Please Log in or Create an account to join the conversation.

Powered by Kunena Forum