What to build

MY "77" has too much damage from the wreck. The engine was pushed back into the frame and pulled the down tube on the right side is pullled back. I don't want to put too much work into the bike as it will have a salvage title.

I have a lot of nearly new parts on it. 530 chain mostly that I can't use on my "79" as it has a Ninja suspension and I had to have a rear sprocket built fot the KZ gearing.

I am going to retrieve the "79" this week and decide if I want to leave the mono shock in or go back to the longer swingarm.

I really liked the lowered and streached look.

It is a bummer but I started strippping my bike to sell the parts. I don't have the room to store all the parts.

I will list them on eBay but give everyone here a heads up before I list them.

The first parts I will sell is the extended swingarm with a 530 chain and sprocket set. That way the buyer will not have to buy a longer chain.

The swingarm measures 25 3/16 inches from the center of the pivot bolt to the rear of the swingarm.

I'll post pictures tomorrow. Roy

Bring it on Roy, whats the offset on the countershaft? and the ratio for the 2?
The Katana swing arm guy disapperared, never replied to my pm.
I am always building something.
Post some pictures soon.

Marty in Buffalo

No off set on the sprocket. The swingarm is just long enough to give it a good streached look. Roy

Here are the parts. The sprockets are 18/45. I doubt this chain has 3500 miles on it.


$225.00 for the chain,sprockets,and swingarm/stay. I pay the shipping in the lower 48.