Zerk Fittings

More
28 Dec 2011 13:32 - 28 Dec 2011 14:27 #494984 by KraZy Chris
Zerk Fittings was created by KraZy Chris
Are the zerk fittings standard size on my bike? I have tried my grease gun on the ones on my bike with no luck. By standard size I mean the same as I use on my tractor and bush hog ect. Also Anyone know how many grease zerks I have? I found one on the swingarm. Am I missing any?

Thanks,
Chris

78 KZ1000, Middle TN
Last edit: 28 Dec 2011 14:27 by KraZy Chris.

Please Log in or Create an account to join the conversation.

  • z1kzonly
  • Offline
  • User
  • Sustaining Member
More
28 Dec 2011 16:03 #494995 by z1kzonly
Replied by z1kzonly on topic Zerk Fittings
Yes, They are standard. You should only have the one on the swingarm. Most people never greased the swing arm. Thats why they were always worn out.
Plus the tip ball of the zerk fitting froze up. Not letting the grease in from the gun. I have screwed standard 1/8" npt plugs in swingarms before to plug them. Screw a new one in. It would go in like a self tapping screw and grease away.

Over the years, I always wanted to put a zerk into the steering neck on these bikes and pump about a pint of grease into the neck bearings.

Livin in "CheektaVegas, NY
Went thru 25 of these in 40 yrs.
I SOLD OUT! THE KAW BARN IS EMPTY.
More room for The Old Girl, Harley 75 FLH Electra Glide,
Old faithful! Points ign. Bendix Orig. carb.
Starts everytime!

Please Log in or Create an account to join the conversation.

More
29 Dec 2011 00:58 #495081 by KraZy Chris
Replied by KraZy Chris on topic Zerk Fittings
Thanks, I appreciate the info!

Chris

78 KZ1000, Middle TN

Please Log in or Create an account to join the conversation.

Powered by Kunena Forum