520 offset counter sprocket

More
09 Feb 2012 20:24 - 09 Feb 2012 20:34 #503063 by KzJim
Replied by KzJim on topic 520 offset counter sprocket
Like this?... I have had several made quite easily.. this one is for a 750 Katana. 15T/+5mm off-set. #520 chain.
Front..
[IMG


Back...
[IMG


.. edit... here is the rear drive sprocket for the same bike...
Before anodizing...
[IMG


Just finished and still on the CNC.
[IMG
Naiveté in grownups is often charming, but when coupled with vanity, it is indistinguishable from stupidity.
Tis better to remain silent and thought a fool - than to speak up and remove all doubt.
Did ever think that maybe you've been doing it wrong all these years?
Last edit: 09 Feb 2012 20:34 by KzJim.

Please Log in or Create an account to join the conversation.

More
09 Feb 2012 22:22 - 09 Feb 2012 22:23 #503080 by 750steve
Replied by 750steve on topic 520 offset counter sprocket
Jim thats pretty dam nice! How much does an offset front cost? & rear?, i'll prob need both when i get round to building the Z650
07 ZX6R Race Bike
1977 Z750 B2 Twin
1976 Z650 B1
Last edit: 09 Feb 2012 22:23 by 750steve.

Please Log in or Create an account to join the conversation.

More
09 Feb 2012 22:42 #503085 by dshelly
Replied by dshelly on topic 520 offset counter sprocket
I was just toying with the idea of making my own rear sprocket today out of 7075 aluminum. material is quite expensive though, plus it would need typeIII hard anodized afterwards for added wear. Cheaper to just buy one, however I could make a custom pattern if I did my own.

dshelly
Occupation:Machinist 25+ exp.
'77 Kz1000B1
'78 Kz1000A2
'76 Kz900LTD

Please Log in or Create an account to join the conversation.

More
09 Feb 2012 22:56 #503087 by KzJim
Replied by KzJim on topic 520 offset counter sprocket
dshelly.. there are at least 6 different arcs that make up the tooth and that's just from the peak of the tooth to the bottom of the valley. Have you ever made one?
The one you see on the CNC is 7075-t6 and hard anodized.

Steve... I'll email you..
Naiveté in grownups is often charming, but when coupled with vanity, it is indistinguishable from stupidity.
Tis better to remain silent and thought a fool - than to speak up and remove all doubt.
Did ever think that maybe you've been doing it wrong all these years?

Please Log in or Create an account to join the conversation.

More
10 Feb 2012 11:18 #503175 by 531blackbanshee
Replied by 531blackbanshee on topic 520 offset counter sprocket
dang jim :ohmy: !

show off much :P .

nice work.

sooooooo,i take it that you are a sprocket mfg.? :huh:

leon
skiatook,oklahoma 1980 z1r,1978 kz 1000 z1r x 3,
1976 kz 900 x 3
i make what i can,and save the rest!

billybiltit.blogspot.com/

www.kzrider.com/forum/5-chassis/325862-triple-tree-custom-work

kzrider.com/forum/5-chassis/294594-frame-bracing?limitstart=0

Please Log in or Create an account to join the conversation.

More
10 Feb 2012 11:39 #503183 by KzJim
Replied by KzJim on topic 520 offset counter sprocket

531blackbanshee wrote: sooooooo,i take it that you are a sprocket mfg.? :huh:


One could make that assumption... ;) I've produced quite a few..
Naiveté in grownups is often charming, but when coupled with vanity, it is indistinguishable from stupidity.
Tis better to remain silent and thought a fool - than to speak up and remove all doubt.
Did ever think that maybe you've been doing it wrong all these years?

Please Log in or Create an account to join the conversation.

Powered by Kunena Forum

Forum Links